Jump to content

mr hooks

Members
  • Content Count

    41
  • Joined

  • Last visited

About mr hooks

  • Rank
    New Member
  1. Will this work with my mobo.Is it the same size as the stock cooler,cause my x1950xtx is big.VIZO-NBC-101-CPR Copper Sleet Chipset Cooler
  2. This is what I try to hit 2.8 with .Also I have read the guide about 67 times I think my chip maxes out at 2.7.
  3. FSB Bus Frequency:280 LDT/FSB Frequency Ratio:3 CPU/FSB Frequency Ratio:10 RD580 HT PLL Speed:high speed HT Bus NMOS Drive Strength:31 HT Bus PMOS Drive Strength:31 HT Bus Receiver Impendence:31 CPU HT Bus Drive Strength:strong K8 Cool & Quiet Support:disable CPU VID Control:1.55v CPU VID Special Control:auto DRAM Voltage Control:2.80v SB PCIE Voltage:1.90v NB Analogue Voltage:1.47v LDT Bus Voltage:1.34v NB Core Voltage:1.34v DRAM Frequency Set:180 fsb 01/01 CPC:3 CAS (tCL):3 tRCP:8 tRAS:2 tRP:15 tRC:2 tRFC:2 tRRD: tRW:3 tRTW:3 tWTR:not sure tREF:3120 Bank Interleaved:enable Errata 94: Disabled Errata 123: AUTO Odd Divisor Correct:diable DQS Skew Control:auto DQS Skew Value:0 DRAM Drive Strength:auto DRAM Data Drive Strength:auto DIMM 1/2 Clock Timing Skew:auto DIMM 3/4 Clock Timing Skew:auto Max Async Latency:8.0 Read Preamble Time:5.5 IdleCycle Limit:256 Dynamic Counter:disable R/W Queue Bypass:16 Bypass Max:7 Burst Length: 4
  4. Thanks guys I needed the help to get stable .This is the best forums.Did I do something wrong.Or do not many peeps have this board.
  5. OK just loaded the bios 10/19/07 .need to get stable at 2.7 help please.
  6. Passed memtest #5 no errors.Cant hit 2.8 will not post.I will up voltage some more any tweaks with settings you see I need 2 fix.
  7. The ram is redline 2x 1gb 991493.It passed 8hr of orthos and 3d mark 06 at 2.7.
  8. FSB Bus Frequency:270 LDT/FSB Frequency Ratio:4 CPU/FSB Frequency Ratio:10 RD580 HT PLL Speed:high speed HT Bus NMOS Drive Strength:21 HT Bus PMOS Drive Strength:21 HT Bus Receiver Impendence:10 CPU HT Bus Drive Strength:strong K8 Cool & Quiet Support:disable CPU VID Control:1.50v CPU VID Special Control:auto DRAM Voltage Control:2.69v SB PCIE Voltage:1.80v NB Analogue Voltage:1.34v LDT Bus Voltage:1.34v NB Core Voltage:1.34v DRAM Frequency Set:200 fsb 01/01 CPC:3 CAS (tCL):3 tRCP:8 tRAS:2 tRP:16 tRC:3 tRFC:3 tRRD:2 tRW:3 tRTW:3 tWTR:not sure tREF:3120 Bank Interleaved:enable Errata 94: Disabled Errata 123: AUTO Odd Divisor Correct:diable DQS Skew Control:auto DQS Skew Value:0 DRAM Drive Strength:auto DRAM Data Drive Strength:auto DIMM 1/2 Clock Timing Skew:auto DIMM 3/4 Clock Timing Skew:auto Max Async Latency:8.0 Read Preamble Time:5.5 IdleCycle Limit:256 Dynamic Counter:disable R/W Queue Bypass:16 Bypass Max:7 Burst Length: 4
  9. I use ccc 7.8 and ati tool for overclocking.
  10. I have 1 x1900xtx or 2 x1800gto .That Ill trade.
  11. As you can tell from my sig I have 4 hard drives.One is going bad .Can I migrate all data from that drive 2 the other three.And how is that done.Thanks for the help.
  12. Yes it will.You need the adapter that came with your newer card.Second you need to go in ati software and activate crossfire .You should be ok after that.
×
×
  • Create New...