Jump to content


  • Content Count

  • Joined

  • Last visited

About guitarguy89

  • Rank
    New Member
  1. i dont have the fillport on right now, the tube is just taped to my case. im going to do what t ski said and take the top off, its only 6 screws so it isnt that bad. also the water isnt cloudy anymore, it was ust because of the little bubbles. im getting pretty good temps also, last night when i first turned it on my gpu was 35, and my cpu was going between 26-28, now it stays at about 23 and the gpu is at 33
  2. got it all installed tonight not a single leak...so far. ran into a few stupid mistakes, i counted how many clamps i would need, got 4 for my two rads, 2 for my maze4, 2 for my tdx, 2 for my pump, figured i need 10, so i bought 12 just to be safe, but i never tought about connecting the tube to my fillport or the 3 i would need for my poly T. so i had to run back to homedepot for some more clamps. that was stupid mistake one, now after i got everything together and went to go hook my t line to the fillport, i realized i didnt drill a hole for my fillport and i totally forgot about it. i dont really feel like taking everything apart just to drill a hole for my fillport right now. i got it all filled with liquid, and all the big bubbles are out but the water is very cloudy from really small bubbles, will those go out eventually or do i have to do something to get them out? well im off to bed gotta go to school tomorrow, ill post some pics tomorrow after school.
  3. thanks osama thats actually a really good idea, i never thought of that
  4. did some more work today when i got home from school, getting everything assembled. does anybody know of a place where i can get a 120MM fan grill?, i dont think the blowhole looks that great with out a fan grill
  5. i had a spare class today so i came home and finished cutting the hole, hope to start getting everything back together tonight
  6. i dont have a maze4 chipset block, its the maze4gpu block
  7. ill defenitaly have some more pics up tomorrow after the holes are cut and i start mounting my rads and getting it all setup. I already mounted the TDX and Maze4, but i was wondering if there was a certain barb for inlet and outlet or does it matter?
  8. lol yes it was very easy, but i used the cheaper discs that it came with and those 2 got ground down to nothing pretty fast, almost got the hole done. Im gonna pick up some of the better discs tomorrow and finish cutting the hole and also cut the grate out of the fan in the back to improve the airflow
  9. just got back from homedepot, picked myself up a 60$ dremel, it came with 2 cutting discs and i thought that would be enough but it wasnt..., got almost the hole circle cut then i ran out of discs, ill have to wait untill tomorrow after school to buy some more discs, then finish cutting the hole. i just cant wait till ill get to start hooking everything up. I was suprised how easy it was to cut with the dremel, im restoring my 57 ford with my dad right now and im always using grinders and welders and working with sheetmetal, so it wasnt new to me but so far it went pretty easy.
  10. ok i think ive found what ill need for cutting the hole. homedepot has a Black & Decker 3-Speed Rotary Tool for 30$ then i found some Fiberglass Reinforced Cut-off Wheels for 7$, is there any differece between getting a black and decker rotary tool or the dremel brand, or will either do? i guess i should also get a tool for deburring the hole after it is cut?
  11. yea i have thought about using a dremel and i see they can be bought for about 30$, but would it be hard to cut a circle using one?, what kind of attachment would i have to get?, or would i just get a cutoff wheel?
  12. just got back from homedpot, didnt buy a holesaw yet because for a 4 1/2" holesaw and arbor is was gonna cost bm over 100 dollars. is there any other way to cut the hole or is there somewhere i can take it and pay to get the hole cut?
  13. didnt get anywhere with the case, havnt had time to go to homedepot yet, im gonna try and go tonight got the maze4 and tdx installed last night, hopefully ill get those holes cut today and i can start mounting my rads.
  14. My water cooling setup finally arrived from danger den today.. Ive got my computer all torn apart right now, im gonna start planning out the setup and cutting some holes in my nice case. I need to cut a 1"hole for the fillport and i also gotta cut a hole for my 120MM fan. I gotta run to homedepot tomorrow after school to buy a drill, some hole saws. Ive never cut a hole in a case or done any kind of mod so im gonna need some help, i need to cut a 1" hole for my fillport and so im gonna buy a 1" hole saw for this but i dont know what size to buy for a 120MM fan? To cut the holes all i need is a drill and a holesaw right?, and maybe some sandpaper to deburr the hole. im also gonna pick up some cutters for the tubing. after i get the holes cut ill keep you guys posted with whats going on. ill remember to take alot of pictures.
  15. all the colored Fluid XP+ EXTreme is out of stock, i guess i got to get the boring clear one. i just placed my order, i got D5 pump TDX waterblock Accetal maze4 with ramsinks 2 stealth gts 120 black ice rads Fillport with poly T 7/16 tubing(15ft) Fluid XP
  • Create New...