Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by l3lackh0le

  1. haha that's what i've been doing finally putting my rig to actual use. after years of using my POS dell, playin cs source and splinter cell looks/runs freaking amazing!!!! :drool: :drool: well done timmay on the 3g!
  2. tried that. i'm afraid it's hardware problem...i guess i'm gonna be stuck using marvell. i've searched the forum about this topic(seems like it happens to the mass) read and tried just about all of em. i don't feel like going through rma hassels unless they both go out on me i guess. o well this might be a dumb noob question but wat does dual gigabit lan do? i tried searchin but no adequate answer found. i'm guessin it's like hyperthreading lan connections?
  3. dahh...i tried still no go...thanks anyway... anyone else???
  4. finally got some pics off my camera and got my lazy butt to upload them. well it's pretty much stock so nothing too special. hoping to get some casemod done later this summer enjoy/comment/critique. (my friends letting me borrow his 1905fp monitor so dual monitor action. SWEET! ) No lights just plain ol view: Some UV lighting:
  5. it was working fine then suddenly it stopped working. it keeps on stelling me network cable is unplugged. i've isolated all the parts like router and cable. seems to be the network controller that's the problem. i've enabled marvell that seems to be working fine(using internet on that comp right now). any ideas? or did it just crap out on me...
  6. very nice old guy. i love how you have parts lying around everywhere on your couch and etc. lol
  7. hahaha actually my diet's very weird. i don't eat veggies so basically all i eat are carbs and protein. i can't drink...my body doesn't seem to like it very much. i just have a really good metabolism. i think most girls would kill to have my metabolism
  8. enzyme just curious is there legroom on that desk? looks like it's just full of drawers. but nonetheless very nice. function, nice lil windowm mod you might want to get a filter tho if one of those fans are intakes.
  9. haha i better board up my windows and bolt up my door! jees sounds like praz wouldn't even care. might as well go for his. hahaha o man my gf already thinks i'm the biggest geek in the world w/ my comp/oc jibberish. i have a feeling she wouldn't be too thrilled about my power tool projects. btw i'm just a tall and lightweight asian kid so i'm not sure how well i can pull of that "plumber" look.
  10. hahahah that is freaking SWEET! what is that connected to tho? like a shopvac or even better a AC UNIT??? lol
  11. lol that's hilarious. i don't know if i have that kind of love for my hardware yet. although i'd be pretty sad if my cpu blew on a side note i can't get 3ghz prime stable for my life! 6.5hrs prime stable(you gotta be KIDDING me!) flowerking i hate you haha
  12. all i got for a tool is a drill set(putting together furnitures)...i just came out of college not too long ago so havn't had much use for tools yet. time to start shopping at home depot and start becoming a man! haha that's awesome molt. too bad i live in an apt i'd have to supply a box of those to my entire unit.
  13. yeah that's almost pathetic...i mean if you don't got it then you don't got it. just like my rig right now i can easily boot up at 3006mhz no problem. i've been workin my arse off to get prime stable on this so i can put up an entry and get on ggg but i dunno i got prime 6.5 hrs so far :sad: haha GRRRRR!!! it's killin me but not ready to give up just yet :nod: ::edit:: i did manage to find my max for stock voltage. ocdb entry comin up soon. at least i kno what i'll be running 24/7 at. and i say not too shabby i LOVE my chip!!!
  14. haha i see...man that's kinda sad i mean when i first ocdb's i thought it was pretty complicated too but i mean beside the prime which is easily done over night it's CAKE! i don't know what pple are complaining about esp w/ all the templates you give us.
  15. DFI LANPARTY nF4 SLI-DR - 704-2bta BIOS AMD Opteron 165 dual core CCBBE 0610DPMW OCZ 2GB (2 x 1GB) 184-Pin DDR SDRAM Dual Channel Platinum Model #: OCZ4002048ELDCPE-K Leadtek 7800GTX 256MB, 480mhz/1.25ghz Western Digital Raptor 74GB 3.5" Serial ATA150 Hard Drive NEC 16X DVD±R DVD Burner Black IDE/ATAPI Model ND-3550A flashed to 4551a OCZ PowerStream OCZ600ADJ ATX 600W Power Supply - Retail Zalman cnps9500 led cpu cooler * * ========== Genie BIOS Settings: FSB Bus Frequency - 315 LDT/FSB Frequency Ratio - x 3.0 CPU/FSB Frequency Ratio - x 9.0 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.350v CPU VID Control - 1.2v CPU VID Special Control - Above VID * 110% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 2.80v DRAM Configuration Settings: DRAM Frequency Set - 150=RAM/FSB:03/04 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 03 Bus Clocks Min RAS# active time (Tras) - 05 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 09 Bus Clocks Row refresh cyc time (Trfc) - 12 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 1168 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - normal 4 DRAM Data Drive Strength - Level 2 Max Async Latency - 8.0 Nano Seconds DRAM Response Time - normal Read Preamble Time - 6.0 Nano Seconds IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 04 x 32 Byte Granularity - Disable(4 Bursts) ========== dual Prime95 + 3dMark2001SE + CPU-Z 1.29 + Everest memory read: everest memory latency + 3dMark2003 + mbm5: Everest memory write + 3dMark2005 + a64info + mbm5: ========== short description: max @ stock voltage 315*9 @ 2835mhz @ 1.200v + 110% 2.2-3-3-5 @ 2.8v vdimm
  16. lol i graduated from purdue last year! too bad i'm not in IN anymore tho i must say i'm not missing the corn fields all the much
  17. hahahahaha o man that sounds like too much fun. i imagine many pple will look like this :drool: from excessive OCing. i really need to get myself a dremel tho and start some case modding. i'm thinkin about a blowhole on top and maybe a couple fans on the window. def need a fan blowing on the pwmic.
  18. yes vc-re is virtually same size as the stock chipset cooler. my 7800gtx fit right over it. but i'm now using the lower slot. if you do so tho you must set the jumpers on the mobo to sli mode so it runs at 8x pcie otherwise your card's going to be running at 2x lol btw i highly recommend the vc-re it's cheap and works very well. keeps my chipset at 41c full load. ::edit:: i forgot to mention u can find the vc-re installing tutorial vid somewhere on the forum.
  19. hahaha o man looks like i'm in trouble. i've already started to lose sleep ever since i've been OCing. i start work at 7am and i've been up til at least 1am this week and a half. i'm practically sleeping at work not to mention i probably spend as much time on dfi-street as doing working during work. haha 289mhz 1:1! wowowow yea...i've pretty much been wanting new rams since oc day 1.
  20. yea this is just for ggg DEF not for 24/7. i'm gonna bring it back down to 1.375 max for 24/7.
  21. haha yea i'm pretty much going for 3g purely for an entry and ggg... :cool: soon as that's done i'm bring it back down to stock(maybe a lil more) run it around 2.7-2.8. i'm just doing this for fun since i'm in the oc phase. i need to start playing some games on this thing. :nod:
  22. well if your psu was comparable to pc p&c i think it'll be fine. akasa? never heard of it but it's probably japnese and they usually make pretty good quality stuff in general. but yes be sure to connect ALL connectors on the mobo!!!
  23. yea it's gotta be your psu. you should def follow that link from molt. i just built my first system too. just do a lot of reading and researching you'll figure out the source sooner or later
  • Create New...