Jump to content

Wild Thing

Members
  • Content Count

    141
  • Joined

  • Last visited

Everything posted by Wild Thing

  1. I just went from a 939 system to the system in my sig. Cost me $500 USD. I used the HD"s, Powersupply, CPU fan, and video card from the 939 system. Currently im o/c'd to 3.4g.
  2. Borrow a ps2 keyboard from a friend or get a usb to ps2 adapter to plug in the ps2 keyboard port on your computer. Ps2 keyboards have been recommended for dfi boards in the past.
  3. Bottom slot is 2x untill you move the sli jumpers, then 8x
  4. I haven't been on the Street for very long, but I really appreciate all the blood, sweat and tears that you have put into this forum. As it is the best forum on the net. My hat is off to you and Mushkin for this contest and such a great prize. The winning number is 2.
  5. Your psu is very under powered, 480w min. is recommended. Your psu is probably causing the wall, and if that is the only problem your having you are lucky. If that Chieftec goes it will probaly take other components with it. Do yourself and your equipment a favor and get a psu on the recommended list.Recommended list
  6. My order for the 148 was cancelled. Too bad.
  7. Did you plug in the power connector to your video card?
  8. Just checked Pc Connection and web page is showing in stock. Phoetus, I just googled and it poped up.
  9. Just ordered one 46.46 shipped. Will let you know what stepping I get. PcConnection So Excited that I finally found a great deal I put the wrong price in the title. The correct price is $36.97. Pricing Error - PC Connection is not honoring orders - soundx98 http://www.dfi-street.com/forum/showpost.p...39&postcount=32
  10. New equipment new solutions. Cmos reload will not clear with a bios update or a cmos clear. Do not use any stored settings with a new bios. To be safe load optimized defaults save and exit, reenter bios and save optimized defaults to any cmos reloaded settings that you have saved. This will wipe out all the previous settings that you saved and will save you some headachs.
  11. What voltage did you have it set on originally? What voltage do you want to go to? What is the Bios reporting as the voltages (before and after the voltage increase)?
  12. Please make a sig as per the rules you agreed to, before the mods jump you. Didn't see one in your profile.
  13. H_G I need an opty 165 ccbe 0610, 2 7900's, sli-bridge to go along with my free Mushkin XP-650. LOL Just kidding.
  14. No you did not make a mistake. The 702-bta bios is the 07/06/2005 bios that has been modded. I'm using it and I really like it.
  15. I have finally made up my mind about the Mushkin psu. This is a beautiful psu. The color, sleaved cables, ability of 12v rails to suppliment each other, rock solid rails, and the power (just to mention a few) make this psu a very good one. If it had active pfc this would be a great psu. I love it as the pros outweigh the cons (only 1). I can't recommend this psu as per the rules but, I do not think anyone would be disappointed in this unit. The 5.0v and 3.3v rails showed some fluctuation of .01v to .03v idle and loaded with webtemp and mbm5. The dmm did not show any fluctuation. Mushkin Reps, can I upgrade to the new unit with active pfc if I pay the price difference? (when it comes out) My next memory purchase will definately be Mushkin. Mushkin you sold me with your products. Mushkin rocks!
  16. davidhammock200,the total output of the 4 12v rails is 44 ampsnot 30 amps. That is off the lable on the XP-650.
  17. technodanvan I used a dmm. I would have preferred that the 12 volt rail was 12.00v to 12.10v.
  18. I've had it running for 2 hours. Rails are very stable so far. Looks like its going to be a keeper. Mushkin could have gotten the 12v rail to 12.00 volts though.
  19. I got the Mushkin XP_650 PSU today and it is installed. Here's a pic of the cables and psu. The power supply is 7.5" long. The psu is a smoked metalic and looks great. Here are the cable lengths: ground, 24 pin, and 4 pin cables are all 17.5" sata cable 19.5" Pci express, floppy, and molex cables are 19.25" voltages were measured with a DMM Idle voltages 12 volt rail = 11.88v 5 volt rail = 5.04v 3.3 volt rail= 3.39v Loaded voltages 12 volt rail = 11.88v 5 volt rail = 5.04v 3.3 volt rail= 3.39 I ran Prime95 blend test to load my computer. Here is a couple of more pics: before pic After Pic green led on exhaust fan The Mushkin psu is 1.5" longer than the Antec psu and I can not install the 120mm exhaust fan that I recently modded. If there is any more information that I can give, just ask.
×
×
  • Create New...