Jump to content


  • Content Count

  • Joined

  • Last visited

Posts posted by flybye444

  1. Go into bios and check your command rate. For 4 sticks it needs to be set to 2t and manually set your ram timing to manufacture default settings

    ram should never be left at auto. Sorry also u can boot up with 2 sticks then go into bios and change your settings then shut down put the other 2 sticks in and the computer will boot with 4 sticks providing you follow the instructions .

  2. Besides the psu you need to read up on uli errors controller problem with this motherboard fix for this is use windows drivers for the controller...... (ali drivers). This link plus many more http://www.diy-street.com/forum/showthread...ight=uli+errors

    This uli error doesn't happen to all cfx 3200 but it happens a lot. Solve mine by installing promise controller card but not an option for everyone as they are 100 bucks but again use the ali windows drivers for the uli controller. Problem solved

  3. I found best performance for my ram was to set the cpu @ 2925mhz (224x13 multi)

    but had it running @3010mhz. At 2925 mhz the ram is set to 2.5-3-2-5 1t 1:1 and runs 7167 for memory bandwidth. This is pc4000 ocz platinum ram well its in the sig anywa. PS check your ram timings because you should get way better o/c then that.

  4. I have crossfire setup on 1900xtx. When the drivers get screwed on the install it is a headache. For instance all ati drivers 6.3 and before requires dotnetfx 1.1 anything after 6.4 requires dotnetfx 2.0. Also Use the ati uninstall utility to get the drivers out. May take 3 or 4 tries to get them uninstalled some times even tried safe mode which we know u can't access drivers in there. Also after I removed the drivers and software successfully i still had to go into the regedit to delete the entries. After the reboot sometimes u get (can't uninstall the reg key prompt). Yes it is a pain in the butt but I have had better luck with dotnetfix ver 1.1 and ati drivers 6.3 they give best performance and speed

  5. I think 6 days is beyond misdirection after all it is a tracking system every drop off or pickup is scan in so the board has been stolen. You know it and so do I. Plus claims are done from the shippers side so that means I have to get satisfaction from dfi. Wish me luck with that after all they sent the board back to me without insuring it so what does that say about dfi

  6. RMA is lost by united parcel service but thats only half the problem dfi california did not insured the motherboard thats how dfi supports it customers. They are nil in the support department. Now am I going to get a new board from them or am i going to get my 100 bucks from ups. Well now that would only be 180 dollar lost thanks to both companies. I hate incompetence

  • Create New...