Jump to content

Supercharged

Members
  • Content Count

    265
  • Joined

  • Last visited

About Supercharged

  • Rank
    Member
  1. Guys, i am planning to get a am2 or C2D board over the weekends and I need some recommendations over the boards. I've shortlisted the following boards due to certain price and other criterias. AMD GA-M57SLI-S4 GA-MA69GM-S2H M2N-SLI Deluxe intel P5KC P5B-E Plus P5K-VM I've lost touch with the newer tech so need inputs here..
  2. intending to get a set of crucial ballistix ddr500 3-4-4-8 to use in my dfi venus board using either opteron 146 or 170. does it have any compatibility issues of any sort? thanks
  3. sometimes 12hrs isnt enough. i've had 13hr failures before.
  4. whatever that doesnt kill yr chip makes it(and u the overclocker) stronger
  5. man..this is interesting. i was abt to delete orthos for my 170.
  6. i tried gabbo's method but didnt work. anyone has other tips?
  7. for 300HTT i am using either 7/10 or (the other divider which i cant remember makes the ram run at 183mhz)
  8. thanks man, while the street was done, i was pushing my cpu and when i hit paydirt i was waiting to post those long awaited screenies.
  9. i am having probs with this mem. it works fine working with a 300mhz under a 5/6 or 7/10 divider but once i try to raise the mem mhz beyond 220mhz, all hell breaks loose. for 250mhz memtest gives me errors like totally scrambled text or things like 198% Pass 199% test pass. 199%? 230/240mhz gives me 500+ errors on each pass. i am very surprised as my old rams 2x1GB corsair VS rams using uccc chips like the above, can clock stable at 250mhz, booted to 270mhz before. DRAM Configuration Settings: HTT= 250 DRAM Frequency Set............................ - 200mhz Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 12 Bus Clocks Row refresh cyc time (Trfc)................... - 15 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 01 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - increase DQS Skew Value................................ - 0 DRAM Drive Strength........................... - 10 DRAM Data Drive Strength...................... - Level 2 Max Async Latency............................. - 10.0 DRAM Response Time............................ - normal Read Preamble Time............................ - 9.0 IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts)
  10. thanks for the confidence boost. actually i simply set the vcore high so i can concentrate on dram settings my idle temps are 27-28C depends on the programs in an aircon room set to 26deg. using watercooling on a sweet set up. CatharG4 block Laing D5 pump. cooltrek 2x120mm rad 2x 120mm papst fans
  11. how come my entry isnt added to the list ?
×
×
  • Create New...