Jump to content

SebSom

Members
  • Content count

    15
  • Joined

  • Last visited

About SebSom

  • Rank
    New Member
  1. SebSom

    problems?

    Thank you for your answer! to the points: 1. yes i want to tweak my system but only my CPU (X2 3800+ from 2 GHz to 2.4 GHz) first and later i will buy other RAM modules and clock them to 240 MHz (1:1) but at the moment i want to try my MDT modules at 200 MHz with a RAM divider... but is your power supply also able for overclocking? 2. yes i think that i am capable of basic software/hardware troubleshooting but i think this BIOS and some of the problems aren't really BASIC... 3. yes 4. yes, i have to say that this is the best community of hardware(mainboards) i got to know (ok, the MSI board was German but they couldn't really help...) i have another question: in nForce2 times ABIT also had very good mainboards and now they have the ABIT FATAL1TY AN8 but why isn't it recommended ? is the DFI LANPARTY Ultra-D better? which voltage i shall measure? in windows all the voltage lines are correct (within +/- 5 %) and the beQuiet power supplies have some good/positive reviews...
  2. SebSom

    problems?

    Sorry I had no time to answer before. So you would recommend the Lanparty Ultra-D to me? because in other boards they said that this mainboard is very difficult and makes a lot of anger...
  3. SebSom

    problems?

    First thank you for your fast and detailed informations. So you say the nF4 Ultra-D is really stable if you do everything right? What do you mean with this ? >>9. Trying to install OS with more than one hard drive or one RAID array connected to the m/b<< do you mean a RAID system is bad and you only can use one hard drive (only one totally or only for the OS? the sentence is a little bit confusing...) What is the problem of my power supply? the 420W instead of 480W? What do you think about the Enermax Liberty 500W? I havent found it really on your list but its cheap(er) and has good abilities (2x 12V:22A) but what about this: http://www.dfi-street.com/forum/showthread...Enermax+Liberty
  4. Hello, i want to buy a DFI Lanparty UT nF4 Ultra-D but i have read that there are many problems... the RAMs wont work, the BIOS has too many functions and options, the northbridge Cooler has a bad position... Is it right and can you recomment this mainboard to me? Is my power supply good enough ? : beQuiet P5-370W-S1.3 Power +12V 27A Power +5V 37A Power +3.3V 30A Total Power 420W
  5. SebSom

    compatibility problems?

    ok, thank you, then i will buy them because they are cheap (117 € for 2x512 DC Kit) which drivers shall i install for the Lanparty nF4 Ultra-D ? the DFI ones or the new nForce 6.70 AMD? which CPU cooler would you recommend me (it has to fit easily on the DFI Lanparty nF4 Ultra-D? and does somebody have experience with the Scythe Katana?
  6. SebSom

    compatibility problems?

    thank you for your fast answer... but you have PC4000 Crucial RAM, what about these PC3200 ?
  7. SebSom

    compatibility problems?

    Hello, first thank you for your nice answers. You helped me a lot. But still two questions? What about this RAM? Does anybody have experience with it and this board? http://www.crucial.com/ballistix/store/par...DULE=BL6464Z402 And does somebody know if the Lanparty nF4 Ultra-D has an PCI-Fix and an PCIe-Fix? Or isnt it necessary?
  8. SebSom

    compatibility problems?

    Can someone help me with my questions?
  9. SebSom

    compatibility problems?

    Thank you for your fast answers! I think I will try it with my MDT's first If they wont work, what do you think about these ones: http://www.crucial.com/ballistix/store/Par...IT6464Z402&cat= And does somebody know if the Lanparty nF4 Ultra-D has an PCI-Fix and an PCIe-Fix? Or isnt it necessary?
  10. SebSom

    compatibility problems?

    Does the Lanparty nF4 Ultra-D have an PCI-Fix and an PCIe-Fix (at which clock has the PCIe to run?) How can i recognize (see) that my RAM wont work with the Lanparty nF4 Ultra-D
  11. SebSom

    compatibility problems?

    Can someone answer my questions?
  12. SebSom

    compatibility problems?

    @ bexer but I want to overclock... isn't it possible to run the RAM's at standard clock with the divider ? Then you can overclock or not? Does the Lanparty nF4 Ultra-D have an PCI-Fix and an PCIe-Fix (at which clock has the PCIe to run?) @ ExRoadie what do you mean with it...will the Asus Extreme N7800GT fit ? it is clear that if the case, mainboard or video card are connected in a wrong way... it wont work. but is there the space that it will fit? is there a problem for the chipset cooler if the video card is over the cooler?
  13. SebSom

    compatibility problems?

    Hello, ok then I have to buy new RAM. What do you think about this: G.Skill DIMM Kit 1024MB PC3200 DDR CL2-3-3-6 (PC400) (F1-3200PHU2-1GBZX) http://www.gskill.com/f1-3200phu2-zx.html Does it work properly (PC400, Dualchannel, CL2-3-3-6) ? And another question: I had a nForce 2 Board, there I had to deactivate ACPI in the BIOS...shall I do it with the Lanparty nF4 Ultra-D too?
  14. SebSom

    compatibility problems?

    Thank you for your answer... What is the problem with the RAM's ? i used them on many other boards and they work...
  15. SebSom

    compatibility problems?

    Hello, i have bought a DFI Lanparty nF4 Ultra-D in an online shop (but its not here at the moment). I don't know if the components which I have work without problems. Can you help me? 1. Does the ASUS Extreme N7800GT work properly because i have read that the chipset cooler is a little bit to tall? 2. Does my 2x MDT 512MB PC3200 (doublesided) RAM work properly (200 MHz and Dualchannel)? (because I have read that the mainboard has problems with unknown RAM's) 3. Does a Scythe Katana CPU cooler fit on the mainboard without taking the space of the RAM/graphics card? It would be nice of you if you can help me! nice greetings
×