Jump to content

braz2kuk

Members
  • Content count

    102
  • Joined

  • Last visited

About braz2kuk

  • Rank
    Member
  1. Off to america to see some friends for a couple of weeks but going to buy my rig why im over there save a fortune.. If you live in the uk you can get 1.82USD for 1GBP or well i did yesterday New York and conroe her i come.
  2. Hey guys, Just asking for a bit of help here really, i have built a few computers in the past and have always used air cooling but i am know looking at the next step which is water, the reasons mainly for a better oc and reduced temps but also for the reduction in noise. Anyway my question is i have no experience in building a watercooled system neither do i have any skills with a dremel to mount a rad or anything, so i was considering buying this complete system from this company: http://www.extremeprometeia.com/acatalog/P...alled_Kits.html However i have heard many many excellent things about Danger Den and would like to go that route but do they make complete systems? If so can i get them in the UK as thats were im based. Any help would be greatly appreciated. Thanks Pete.
  3. braz2kuk

    Expert Ethernet Problems

    Hey there, I have both the nvidia and marvell ethernet on my board wokring fine, but i use nvidia ethernet usually. However soem things you could try firstly try resetting the bios and maybe updating it not sure what version your on, if that don't work i would maybe try getting the latest drivers off the net and having a go with them. If that doesn not fiox it, then it could be something deeper i.e. board of memory, but try that first and see how you go from there
  4. braz2kuk

    754/939 Users - What CPU COOLER are you using?

    Artic Cooling Freezer 64Pro With a tad of AS5
  5. braz2kuk

    Memory Issues!

    Hey guys thanks for the help, i upped the voltage to 2.7 and loosened the timings to 3-4-4-7 and all is well so far 3 passes of memtest86+ no errors will keep you posted. Thanks Again
  6. Hi guys, I am currently in the process of working on my brothers rig which has the following spec: AMD 3500+ Venice Core DFI nF4 Ultra-D 1GB (2 x 512mb Sticks OCZ Premiere RAM rated @ PC3200 @ 2.5-3-3-7) OCZ Power Stream 600W SLI Freezer 64 Pro w/AS5 SATA Seagate 200GB HDD ATI X800 PCI-E Graphics Card Creative SB Audigy 2ZS Basically this rig was working ok until i gave my brother my DFI nF4 expert board and installed it into his system with all the same parts. The system came on fine however when i try and install windows i get a STOP screen that says IRQL Less or not equal to now i know this is very likely a ram issue so i decided to run memetest and i get a lot of errors which i don't understand as the ram worked fine in the ultra-d. The ram is in the orange slots and is running at stock settings set by auto in the bios should i chnage the settings from auto? give the sticks more voltage? i am not sure what to do. Any help woould be greatly appreciated Thanks Pete.
  7. Opty 175 SOLD! BUMP and Price Lowered on DFI nF4 SLI-DR Expert Board £60!
  8. Hi Guys, I have a mint condition OCZ Powerstream 600 W (700W Peak) SLI Compatiable PSU, This PSU in on the DFI recommended list for PSU's and has very stable and adjustable rails. It comes with the native 24pin ATX board connector and of course the 8pin EPS connector as well and comes with four SATA power cables, 6 Molex and 1 Floppy as well as two 6 pin PCI-E power connectors. I can provide pics upon request. I will accept £70 for this psu or the equivalent in whatever currency, i will ship worldwide and will accept pay pal only. Any question you can PM me or Send me a email at [email protected]
  9. BUMP Again for GOOD CPU and BOARD!
  10. Ram SOLD, BUMP for CPU and Board!
  11. BUMP for great parts at great prices Will now part out system: Board £60 CPU £150 RAM £100 Any offers PM Me or email me at [email protected]
×