Jump to content

BlackEyedBoy

Members
  • Content count

    28
  • Joined

  • Last visited

Everything posted by BlackEyedBoy

  1. I been reading through the A64 OC Guide in the last few day, been testing my X2 4400+ for the CPU MAX and I can only get to FSB/HTT 227, 2.5Ghz. I'm using water cooling for my Cpu and Gpu, Temps is around 48-51C when full load and Vcore 1.64! I would like to know that if I can get higher CPU Max for my 4400??? Or that's really the max for my CPU??? Do I need better water cooling system or should I add more Voltage for my CPU??? Can anyone help me out on overclocking my CPU, I'm new in overclocking that's y I've got so many questions to ask, hehe!! Plx help me out!!! I'm stuck!! Thanks very much to everyone!!!
  2. I'm planning to built a PC with RS482 INFINITY matx board but not sure that if I can overclock it with matx?????
  3. I ran MEM86+ for more than 18 hours with 55past on all test with 2 x 512 Geil One S, runing at ddr600 @ 2.5-4-4-7 (2T). Try running my gig at 2.4 with mupti 8X, FSB 300. boot in to windows but not stable, I ran the SiSoftware Sandra Memory BandWidth Benchmark and scorce Int Buff'd 3143/MBs Float Buff'd 3025/MBs which is even slower than in ddr400 2-2-2-5???? Am I missing out something???? Do I have to add volt on LDT, NB Core too??? and what is Registered/Buffered memory and ECC/Parity??
  4. BlackEyedBoy

    Geil ONE S 2.5-4-4-7

    I ran MEM86+ for more than 18 hours with 55past on all test with 2 x 512 Geil One S, runing at ddr600 @ 2.5-4-4-7 (2T). Try running my gig at 2.4 with mupti 8X, FSB 300. boot in to windows but not stable, I ran the SiSoftware Sandra Memory BandWidth Benchmark and scorce Int Buff'd 3143/MBs Float Buff'd 3025/MBs which is even slower than in ddr400 2-2-2-5???? Am I missing out something???? Do I have to add volt on LDT, NB Core too??? and what is Registered/Buffered memory and ECC/Parity??
  5. I'm trying to push my GOS to run @ 300 2.5-4-4-7, I'm now still working on the memtest 5 and got my Vdimm @ 3.2V DDR580, pass only 13 time than fail, and on 3.1 voltage I can only pass the test once than fail, so to me giving more voltage did help but what I worried is are the voltage is too high or it is still okay if I add more on it!!! Need some suguess from all you expert!! thanks!!
  6. BlackEyedBoy

    How far can I pust the Voltage on TCCD?

    AR...... I am running 4 x 512 at once!!! Maybe I really should stick around 2.8v and try messing round with the timing!!! Thank you masters!!!
  7. BlackEyedBoy

    How far can I pust the Voltage on TCCD?

    Ture, I've never work on the tref, read preamble and max async, gonna give it a try than!!!!
  8. BlackEyedBoy

    How far can I pust the Voltage on TCCD?

    Oh sorry I mean 2.5-4-4-7 @ 300
  9. BlackEyedBoy

    My TCCD cant run @ CAS 2.5 in Expert

    Guys, what is RMA?????
  10. BlackEyedBoy

    Can't get to DDR600 with RDX-200

    I brought it in HK for $255 2 x 512, GOS is quite hard to find and they are all hand picked, thats why they are very rare! I don't think you can get it now except in ebay (if there is one)^_^! Try the GOW, not sure if you can get to DDR 600 but I've heard that it can get to DDR500 2-2-2-5 which isn't bad at all !!
  11. Got four 512MB Geil one S, trying to put them all to ddr600 but fail, still workiing on it in memtest86+... I can get to DDR580 at the moment with the nf4-D motherboard but I can only get to DDR540 on the ATI RDX-200!!! I trying to reach DDR600, still working on the RAM MAX!! I'n not sure that if i need to rise the NB Vcore or the LTD Vcore to get to DDR600!!! Please help!!!!
  12. On the RDX200, I found that they've got a 8 pin power plug, but at the moment I'm using a 4 pin to 8 pin converter cause of my PSU doesnt have an eight pin!!!! Does it make any different to it? ??? will it make any different when overclockign???? my temp is 48-51 at full load and 1.64Voltage @ 2.5G, this is my cpu max with prime 95 stable!!!!! tried 1.49 Volt but fail!!!! plx help!!!!!
  13. BlackEyedBoy

    Overclocking The DFI-RDX200

    what temps and cpu voltage dod you get when runing 2.5G???
  14. I'm using the Lanparty RDX200 but don't know why, I score even lower than using the MSI Neo 4 P nforce4 Ultra!!! Use to get 6411 but now less than 6000, aroung 5962something!!! How come!!!
  15. BlackEyedBoy

    X2 4400+ CPU MAX 2.5GHz???

    Oh sugar, I just realize that I've got my water cooling setup wrong, maybe thats the reason my temp are so high!!!! From water tank - pump - Reserator - cpu - gpu - back to tank!! haha..........
  16. BlackEyedBoy

    X2 4400+ CPU MAX 2.5GHz???

    I didn't watercool my Chipset and Pwmic, just letting you know the temps of it!! Weather in HK is around 22-26
  17. yes, everything in defaults, did reinstall with the mobo change too!!
  18. BlackEyedBoy

    X2 4400+ CPU MAX 2.5GHz???

    I'm using a zalman water cooling block and I use the coolermaster thermal paste. PWMIC aroung 40C and Chipset around 46C!!! Maybe I should redo the CPU Block and see if it is the water block connections!!
  19. BlackEyedBoy

    X2 4400+ CPU MAX 2.5GHz???

    I was thinking........ my temps are too high(34, 49-52load).........with watercool.......voltage too high as well(1.64)..........hum................ is this because I'm using the ATI RDX200 Motherboard???? Does it matter????? id I get the worng Motherboard??????
  20. BlackEyedBoy

    Geil DDR600 2.5-4-4-7

    how do i know which is the weakest slot?????
  21. BlackEyedBoy

    Geil DDR600 2.5-4-4-7

    Just found my max on the cpu and now trying to work on the RAM. I have 4x512 Geil ram but dont know how to get it on DDR600 or even finding the max! Here are the details of the RAM GEIL GOS5123200DC TCCD 3200 1.5-2-2-5 @ DDR400 or 4800 2.5-4-4-7 @ DDR600 I've been reading through the A64OC guide but I still don't understands it!! I fail the mem86 even on HTT240!!! How cana I get my ram to ddr600??? plx guide me!!! thanks!!!
  22. BlackEyedBoy

    Geil DDR600 2.5-4-4-7

    so should I try with 2x512mb before 4x512??? I'm still abit confuse on how to test out my ram max!! I'm not sure how to overclock it!!! Ram voltage?? Timming?? they are too much for me!!!lol!!! Will you guys plx help anf guide me on overclocking this ram plx???? I always crash at the very begining, b4 windows logo appears and cant even do the mem86!! hehe
  23. BlackEyedBoy

    X2 4400+ CPU MAX 2.5GHz???

    I've just find out that my Vcore in CPUz is 1.350v @ 2.5Ghz, but in ITE Smart Guardian it said 1.64V!! My setting in bios is 1.475x112%............ Can any one tell me which is which???? is my cpu voltage at 1.35 or 1.64???? I'm abit confuse!!!! Thanks
×