Jump to content

BlackEyedBoy

Members
  • Content count

    28
  • Joined

  • Last visited

About BlackEyedBoy

  • Rank
    New Member
  1. BlackEyedBoy

    Geil ONE S 2.5-4-4-7

    I ran MEM86+ for more than 18 hours with 55past on all test with 2 x 512 Geil One S, runing at ddr600 @ 2.5-4-4-7 (2T). Try running my gig at 2.4 with mupti 8X, FSB 300. boot in to windows but not stable, I ran the SiSoftware Sandra Memory BandWidth Benchmark and scorce Int Buff'd 3143/MBs Float Buff'd 3025/MBs which is even slower than in ddr400 2-2-2-5???? Am I missing out something???? Do I have to add volt on LDT, NB Core too??? and what is Registered/Buffered memory and ECC/Parity??
  2. I ran MEM86+ for more than 18 hours with 55past on all test with 2 x 512 Geil One S, runing at ddr600 @ 2.5-4-4-7 (2T). Try running my gig at 2.4 with mupti 8X, FSB 300. boot in to windows but not stable, I ran the SiSoftware Sandra Memory BandWidth Benchmark and scorce Int Buff'd 3143/MBs Float Buff'd 3025/MBs which is even slower than in ddr400 2-2-2-5???? Am I missing out something???? Do I have to add volt on LDT, NB Core too??? and what is Registered/Buffered memory and ECC/Parity??
  3. I'm planning to built a PC with RS482 INFINITY matx board but not sure that if I can overclock it with matx?????
  4. BlackEyedBoy

    How far can I pust the Voltage on TCCD?

    AR...... I am running 4 x 512 at once!!! Maybe I really should stick around 2.8v and try messing round with the timing!!! Thank you masters!!!
  5. BlackEyedBoy

    How far can I pust the Voltage on TCCD?

    Ture, I've never work on the tref, read preamble and max async, gonna give it a try than!!!!
  6. BlackEyedBoy

    How far can I pust the Voltage on TCCD?

    Oh sorry I mean 2.5-4-4-7 @ 300
  7. I'm trying to push my GOS to run @ 300 2.5-4-4-7, I'm now still working on the memtest 5 and got my Vdimm @ 3.2V DDR580, pass only 13 time than fail, and on 3.1 voltage I can only pass the test once than fail, so to me giving more voltage did help but what I worried is are the voltage is too high or it is still okay if I add more on it!!! Need some suguess from all you expert!! thanks!!
  8. BlackEyedBoy

    My TCCD cant run @ CAS 2.5 in Expert

    Guys, what is RMA?????
  9. BlackEyedBoy

    Can't get to DDR600 with RDX-200

    I brought it in HK for $255 2 x 512, GOS is quite hard to find and they are all hand picked, thats why they are very rare! I don't think you can get it now except in ebay (if there is one)^_^! Try the GOW, not sure if you can get to DDR 600 but I've heard that it can get to DDR500 2-2-2-5 which isn't bad at all !!
  10. Got four 512MB Geil one S, trying to put them all to ddr600 but fail, still workiing on it in memtest86+... I can get to DDR580 at the moment with the nf4-D motherboard but I can only get to DDR540 on the ATI RDX-200!!! I trying to reach DDR600, still working on the RAM MAX!! I'n not sure that if i need to rise the NB Vcore or the LTD Vcore to get to DDR600!!! Please help!!!!
  11. On the RDX200, I found that they've got a 8 pin power plug, but at the moment I'm using a 4 pin to 8 pin converter cause of my PSU doesnt have an eight pin!!!! Does it make any different to it? ??? will it make any different when overclockign???? my temp is 48-51 at full load and 1.64Voltage @ 2.5G, this is my cpu max with prime 95 stable!!!!! tried 1.49 Volt but fail!!!! plx help!!!!!
  12. BlackEyedBoy

    Overclocking The DFI-RDX200

    what temps and cpu voltage dod you get when runing 2.5G???
  13. BlackEyedBoy

    X2 4400+ CPU MAX 2.5GHz???

    Oh sugar, I just realize that I've got my water cooling setup wrong, maybe thats the reason my temp are so high!!!! From water tank - pump - Reserator - cpu - gpu - back to tank!! haha..........
×