Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by z3us

  1. Model #: OCZ4002048ELDCPE-K OCZ 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200) Dual Channel Platinum System Memory - Retail http://www.newegg.com/Product/Product.asp?...N82E16820227210 Also i did try to put memory timings in manual as: TCL-2 TRCD-3 TRP-2 Tras-5
  2. ok im trying all i can to do this but my pc will not boot up just goes past the lanparty bios screen beeps and reboots. tried all types of things like 275x9 httx3 no go, 240x10 httx4 no go memory timings set to auto. will not boot unless i put it all back to default 200x10 httx5. Any ideas?
  3. You can see my system below, I want to OC my Rig a bit but dont know where to start. I know basics about oc'in But let say i want to go for 2.5GHz on my 3200. I will have to raise the FSB speed to 250X10=2.5Ghz But here is my Question: Will raising the bus speed like that put stress on any other components? What is the best way to go about this? Thank you! Oh and stock temps are: CPU 30c-37c max --core volts 1.53 SYS 34c GPU 43c-60c max
  4. OK, ran prime95 4hrs 38min no problem [email protected] [email protected] [email protected] ramtest ok, no errors. Ect. Battlefield2 still has a flashing areas every 10min or so of it looks like areas of artifacts that flash once very fast cant tell too much about what it looks like. All my sys test look great. So this may be my 7800gt?
  5. Did that 10passes ok. running prime95 now as i type for about 10 min now ok so far, [email protected] 35c [email protected] [email protected] I think it might be my 7800gt, i think it was having artifacts in the game but there so fast im not sure. But can that cause a blue screen?
  6. Ram timings in bios is on auto. my ram timings are 2 2-3-2-5 i think. This board has a ram test in bios?
  7. Also i am reading about my evga 7800gt co is having bios problems, could this cause this?
  8. Hi, I need help with my new setup, I have a few quetions: #1. My Cpu fans starts and stops,My cooler is plugged in the cup fan slot correctly the cpu temp never gets over 33c Just want to see if this is norm? #2. My Bios are default 100%, And my system is sluggish sometimes and crashes. Once it crashed to the blue screen while playing BF2. I dont know where to start since my settings are stock? Temps once again dont seen too high: CPU 33c Max GPU 57 Max It ran 3dmark05 with 7300 as a score succsessful. And SiSoft Burn in multiple times ok. Im Puzzled?
  • Create New...