Jump to content

VIPER_SK

Members
  • Content Count

    19
  • Joined

  • Last visited

About VIPER_SK

  • Rank
    New Member
  1. I forget to mention I run memtest with 2.6,2.7 and 2.8v. The memory is rated to 2.8v on the crucial web site
  2. Hi, yesterday and today I was running memtest on each memory module with stock settings. . One of the modules runs for 4 hours with no errors, but the other one show up error 5min. after start running memtest. @SharpI clear cmos for 10 minutes, but I wasn't able to run both sticks together. The memory is a kit that I received last February brand new. Also I flashed the bios to the 704. Probably I'll write again to Crucial UK for RMA, to see what happens. For now I can't find noebody to borrow a memory for a test to see if the problem is with the board and I don't want to purchase another memory, I already spent a lot of money on this configuration.
  3. @ bldegle2, yes I have only one orange slot working. I think that the problem is coming from the motherboard. If is a memory problem it will pass the check with the beep and the lights check or not? But can be a memory setup problem? How long was the dfi warranty?
  4. @ bldegle2, yes I have only one orange slot working. I think that the problem is coming from the motherboard. If is a memory problem it will pass the check with the beep and the lights check or not? But can be a memory setup problem? How long was the dfi warranty?
  5. 4? where, I'm blind, actually right now I'm running just 1Gb, for that reason I'm writing here
  6. I'm running 2 sticks, trying to run actually, I get the memory like year and a half ago, but I get new one with RMA last February
  7. What about now?: I don't know from where to change 1T to 2T
  8. I just finish testing with memtest the memory individually each stick. I test them for about 4 hours each one. On the first one no errors, but on the second it finds over 475k errors on one pass. I try something else also, I run Command & Conquer 3 with both sticks individually, and I get a restar of the pc with both. The settings from the test: Are they ok?
  9. I just change the main four timmings to 3-4-4-8 with 2.8v, both sticks individually work in the orange slot. When I add the second one, the system doesn't boot. I'll run memtest with this timmings and voltage to see what happens. What else should I change beside the main timmings?
  10. Hello! After reading all the day around the forum for similar problem, I couldn't find nothing similar. I have the configuration from the sign. For a couple of months (after receiving the RMA from crucial) I'm not able to run 2gb of memory at the same time. I can use only the inner orange slot. When I install the memory on other slot I get the beep and 3 lights on, the same thing happens when I put 2 gb of memory. Why happens that?
  11. The same problem again, it was running good for a couple of days, but now after windows it loaded it restars. I change the voltage to 2.8v. Any other suggestions?
  12. I put the second stick of memory, I change: FSB BUS FREQUENCY > 220 MHZ FSB FREQUENCY RATIO > x2.0 and for now everything is running fine. I'll see for how long. I'll do memtest in the mornig. I'm reading the thread from the other post. I'll take me one or two days to read everything.
  13. Hello. Like a year ago I get the configuration from the sign with the 2gb crucial ballistix. "I'm runnig everithing with stock settings". In the begimimg, everithimg was running perfect. But after a couple of months, when I start the computer it start with long beep. (I didn't touch anithing in the bios or somewhere else) so I took one of the sticks memory and the machine starts runnig fine again. I try a couple of things but I wasn't able to start the pc in dual channel any more with no problems. I start running the 2gb memory in single channel. It runs for a couple of months fine, but after that everithing happens again with no reason. Now I'm runnig 1gb of memory, and the other one stays over my desk waiting for solution. Can somebody help me to resolve this problem with some suggestions?
  14. Hello. Like a year ago I get the configuration from the sign. "I'm runnig everithing with stock settings". In the begimimg, everithimg was running perfect. But after a couple of months, when I start the computer it start with long beep. (I didn't touch anithing in the bios or somewhere else) so I took one of the sticks memory and the machine starts runnig fine again. I try a couple of things but I wasn't able to start the pc in dual channel any more with no problems. I start running the 2gb memory in single channel. It runs for a couple of months fine, but after that everithing happens again with no reason. Now I'm runnig 1gb of memory, and the other one stays over my desk waiting for solution. Can somebody help me to resolve this problem with some suggestions?
×
×
  • Create New...