Jump to content

Jani the Su&#353nik

Members
  • Content Count

    14
  • Joined

  • Last visited

About Jani the Su&#353nik

  • Rank
    New Member
  1. DFI Lan Party UT nf4 Ultra-D AMD Athlon 64 3.0+ Venice Twinmos Speed Premium PC3500 Dual Chanel DDR 2*512 PNY GF 7800GT (485/1.180) Sound Blaster Audigy 2 ZS Hitachi T7K250 160GB 7200 SATA-II 8MB Tagan TG420 U01 SAMSUNG SyncMaster 959NF NEC DVD-RW ND-3540 Logitech MX518 Logitech Internet Navigator Zalman ZM-RS6F Theatre 5.1 Award BIOS masage (704-2BTA) FSB Bus Frequency 275 LTD/FSB Frequency Ratio x 3.0 LTD Bus transfer Width ˇ16^16 CPU/FSB Frequency Ratio x 9.0 PCI eXpress Frequency 1000Mhz K8 Cool'n'Quiet Support Disable CPU VID StartUp Value 1.500 CPU VID Control 1.550 CPU VID Special Control 104% LTD Voltage Control 1.40 Chip Set Voltage cont 1.60 DRAM Voltage Control 3.10 DRAM+.03V If it's not 3.2V Disabled MAC Lan Auto MAC Media Interface Pin Strap Machine MAC(NV) Address Disabled MAC Lan Boot ROM Disabled Interval Phy SATA 1/2 Enabled Interval Phy SATA 3/ Enabled VIA 1394 Control Enabled MARVEL Giga LAN Control Enabled DRAM Frequency Set 166 Command Per Clock Enabled CAS Latency Control(Tcl) 2.0 RAS# to CAS# delay(Trcd) 02 Min RAS# active time(Tras) 05 Row precharge time(Trp) 02 Row cycle time(Trc) 07 Row refresh cyc time(Trfc) 12 Row to Row delay(Trrd) 02 Write recovery time(Twr) 02 Write to Read delay(Twtr) 01 Read to Write delay(Trwt) 02 Refresh period(Tref) 3120 DRAM Bank Interleave Enabled DQS Skew Control Auto DQS Skew Value 0 DRAM Drive Strength normal4 DRAM Data Drive Strength Level 3 Max Async Latency Auto DRAM Response Time Fastest Read Preamble Time Auto IdleCycle Limit 032 Dynamic Counter Disable R/W Queue Bypass 16x Bypass Max 07x 32 Byte Granularity Disable(4 Bursts) Hi again! Is this "configuration" ok?! It works for me with no problems....at last.... I have one (stupid) question: DRAM+.03V If it's not 3.2V Enabled (I had Disabled before)....is this ok?! Many tnx.
  2. hi Do anybody have DFI userbar? Can anybody make it for me? tnx EDIT: I allredy found it:
  3. S&M finds an error on rams...CPU passed all tests...Could be the problem overheating? I will format my computer and test it, then I will OC it and test it again if still error on rams remain I will have to find the right stable config. for my RAMS and the story will be ended... h3h3
  4. I have benn using non OC computer last year for 4 months fom July to October and I have not get any problems while playing games up to 8h (Lan Party )... Tomorow (I think) I will test my OC computer for 12h with OCCT and S&M.
  5. Can you please give me the link(s) please. I will format soon...
  6. If it is not stable...why do Prime95 and MemTest98+ do not "find" any errors at 12h working?
  7. If it is not stable...why do Prime95 and MemTest98+ do not "find" any errors at 12h working?
  8. Just 5min ago I run CSS play 10min in cold room and it crashes again... I will try with format... And if even that wont fix the problem I will have to OC a little less than I have it right now...but I realy do not understand...I do not have extreme or even high OC computer...
  9. I had it that way but I change it today . Sorry.
  10. Tnx for the info...I read it but I see that I read it "bad"...bad like my Englih . But still...If recomended is 2000 isn't 1650 too little? Can you tell me what is too little? And again sorry for my English and thank you very much-->I love all DFI members .
  11. Now I have LTD/FSB x3...I will tell you abou resoults in time (cca 1 month). Again thank you for help.
  12. MemTest98+ and Prime95-->12h...errors free 3DMark05-->10 times..."errors" free (I run benchmark test 10 times one after another) I am not sure that the CPU caused the failure. Now i have set ITE Smart Guardian set at 45 °C (for CPU) to alert me...but there was no alert.
  13. My computer freezeing cca once at month. DFI Lan Party UT nf4 Ultra-D AMD Athlon 64 3.0+ Venice Twinmos Speed Premium PC3500 Dual Chanel DDR 2*512 PNY GF 7800GT (475/1.160) Sound Blaster Audigy 2 ZS Hitachi T7K250 160GB 7200 SATA-II 8MB Tagan TG420 U01 Award BIOS masage (704-2BTA) FSB Bus Frequency 275 LTD/FSB Frequency Ratio x 4.0 LTD Bus transfer Width ↓16↑16 CPU/FSB Frequency Ratio x 9.0 PCI eXpress Frequency 1000Mhz K8 Cool'n'Quiet Support Disable CPU VID StartUp Value 1.500 CPU VID Control 1.425 CPU VID Special Control Above VID * 110% LTD Voltage Control 1.40 Chip Set Voltage control 1.60 DRAM Voltage Control 3.20 DRAM+.03V If it's not 3.2V Disable MAC Lan Auto MAC Media Interface Pin Strap Machine MAC(NV) Address Disabled MAC Lan Boot ROM Disabled Interval Phy SATA 1/2 Enabled Interval Phy SATA 3/4 Enabled VIA 1394 Control Enabled MARVEL Giga LAN Control Enabled DRAM Frequency Set 166 Command Per Clock Enabled CAS Latency Control(Tcl) 2.0 RAS# to CAS# delay(Trcd) 02 Min RAS# active time(Tras) 05 Row precharge time(Trp) 02 Row cycle time(Trc) 07 Row refresh cyc time(Trfc) 12 Row to Row delay(Trrd) 02 Write recovery time(Twr) 02 Write to Read delay(Twtr) 01 Read to Write delay(Trwt) 02 Refresh period(Tref) 3120 DRAM Bank Interleave Enabled DQS Skew Control Auto DQS Skew Value 0 DRAM Drive Strength normal4 DRAM Data Drive Strength Level 3 Max Async Latency Auto DRAM Response Time Fastest Read Preamble Time Auto IdleCycle Limit 032 Dynamic Counter Disable R/W Queue Bypass 16x Bypass Max 07x 32 Byte Granularity Disable(4 Bursts) ...My temperatures are good-->on idle Temperature Osnovna plošča 33 °C (91 °F) Procesor 28 °C (82 °F) North Bridge 46 °C (115 °F) Grafični procesor (GPU) 40 °C (104 °F) HDT722516DLA380 32 °C (90 °F) Ventilatorji Procesor 2312 RPM Chipset 3835 RPM Napetosti CPU jedro 1.54 V +3.3 V 3.23 V +5 V 5.03 V +12 V 11.97 V +5 V Standby 5.11 V VBAT Baterija 3.06 V I know that CPU temperature does not go over 50 °C when it crashes (when I play games) becouse I have ITE Smart Guardian set at 50 °C to alert me... Could it be somethink alse that CPU? Sorry for my English and thank you for your help. EDIT: I have one more question...Should I make my Graphic card frequencys lower for black spots at time to time in CSS...becouse in other games (aka F.E.A.R., Day Of Defeat Source, Need for Speed Most Wanted,...) there are no black spots (overheating)... I have tried 1.61 (CPU-Z) for CPU too.
  14. I have tested my rams and memTest (HCI) said that it have errors. I send it back to test it and there was no errors (they didn't test it on DFI). I have default configuration. DFI LanParty UT nf4 Ultra D TwinMos Speed Premium PC3500 2*512 BIOS 702 -2 Could it be BIOS? Should I flash it to official version? I have tested my rams with memTest86+ and Prime95 and there was no errors.
×
×
  • Create New...