Jump to content

Axl

Members
  • Content Count

    7
  • Joined

  • Last visited

About Axl

  • Rank
    New Member
  1. 2 months ago, I had the problem wherein my system won't boot up. When I hit the power switch, I can see the fans are running but I don't hear a beep sound, no post. Some guys in this forum help me realized that I missed the floppy power connector right beside a fan. I thought this solve my problem until now. I'm getting the same problem again. I checked again all power connectors, they're intact. Please help me again. Thanks!
  2. Hey Guys, I still need some help. :confused: Right now, I'm just running at stock speed ( 2 Ghz ). I'm thinking of hitting around 2.4 to 2.6 GHz as long as it's stable. Thanks.
  3. I ran the OCCT and it stopped testing my system because it is unstable. Given my specs below, could someone help me troubleshoot it? Thanks. Motherboard Model: DFI NF4 Ultra D CPU Model: X2 3800+ Menory Type: OCZ42001024eldcper2k BIOS VERSION: 6-23-05 MEMORY SLOTS USED: 2-Orange Page #1 FSB Bus Frequency 250 LDT/FSB Frequency Ratio Auto LDT Bus Transfer Width 16:16 CPU/FSB Frequency Ratio x10 PCI-Express Frequency 100 K8 Cool 'n' Quiet Support Disable CPU VID Startup Voltage Control 1.5 CPU VID Control 1.25 CPU VID Special Control Above 123% LDT Voltage Control 1.3 Chipset Voltage Control 1.7 DRAM Voltage Control 2.8 **DRAM+.03 Voltage Control Disable Page #2 Dram Frequency Set(Mhz) 200 Command Per Clock(CPC) Enable CAS Latency Control(tCL) 2.5 RAS# to CAS# Delay(tRCD) 3 Min RAS# Active Timing(tRAS) 07 Row Precharge Timing(tRP) 3 Row Cycle Time(tRC) 07 Row Refresh Cycle Time(tRFC) 16 Row to Row Delay (tRRD) 03 Write Recovery Time(tWR) 03 Write to Read Delay(tWTR) 02 Read to Write Delay(tRTW) 03 Refresh Period(tREF) 4708 Write CAS# Latency(tWCL) Auto DRAM Bank Interleave Enable DQS Skew Control Auto DQS Skew Value 0 DRAM Drive Strength 6 DRAM Data Drive Strength 2 Max Async Latency 7 **DRAM Response Time Fastest Read Preamble Time Auto Idle Cycle Limit 256 Dynamic Counter Disable R/W Queue Bypass 16 Bypass Max 7 32 Byte Granulation Disable
  4. It seems to be working fine for now. Hopefully, the 4 pin molex connector solved the problem. Thanks guys! Great job.
  5. Regarding the MOBO power connection, I noticed that the 4 pin molex connector is unplugged. Do I need to plug it in? Everyday that I have to turn on my PC, it will take me 3-4 times to power on & turn it off before i can hear the short beep that my system will start to boot up & start posting & gone to WinXP I went back to my previous oc settings since I don't think my oc doesn't have to do anything with my boot problem. Motherboard Model: DFI NF4 Ultra D CPU Model: X2 3800+ Menory Type: OCZ42001024eldcper2k BIOS VERSION: 6-23-05 MEMORY SLOTS USED: 2-Orange Page #1 FSB Bus Frequency 250 LDT/FSB Frequency Ratio Auto LDT Bus Transfer Width 16:16 CPU/FSB Frequency Ratio x10 PCI-Express Frequency 100 K8 Cool 'n' Quiet Support Disable CPU VID Startup Voltage Control 1.5 CPU VID Control 1.25 CPU VID Special Control Above 123% LDT Voltage Control 1.3 Chipset Voltage Control 1.7 DRAM Voltage Control 2.8 **DRAM+.03 Voltage Control Disable Page #2 Dram Frequency Set(Mhz) 200 Command Per Clock(CPC) Enable CAS Latency Control(tCL) 2.5 RAS# to CAS# Delay(tRCD) 3 Min RAS# Active Timing(tRAS) 07 Row Precharge Timing(tRP) 3 Row Cycle Time(tRC) 07 Row Refresh Cycle Time(tRFC) 16 Row to Row Delay (tRRD) 03 Write Recovery Time(tWR) 03 Write to Read Delay(tWTR) 02 Read to Write Delay(tRTW) 03 Refresh Period(tREF) 4708 Write CAS# Latency(tWCL) Auto DRAM Bank Interleave Enable DQS Skew Control Auto DQS Skew Value 0 DRAM Drive Strength 6 DRAM Data Drive Strength 2 Max Async Latency 7 **DRAM Response Time Fastest Read Preamble Time Auto Idle Cycle Limit 256 Dynamic Counter Disable R/W Queue Bypass 16 Bypass Max 7 32 Byte Granulation Disable Thank you very much for your inputs.
  6. My system doesn't boot from time to time. Upon pressing the power buttor, Psu & fans will turn on but no beep. I put back my speed to original settings (2Ghz) but still the same problem. Could someone please help me? I will appreciate any inputs. Thanks.
  7. With my current setup, my computer didn't boot couple of times. It wasn't even responding when I tried pressing F1 ( to continue) or DEL ( to setup bios). I tried changing keyboards but still the same. After 10 tries, I was able to get it going & fire off this email. Any idea why this is happening? :confused: Below is my bios setup. Could there be something wrong here? Feel free to make a suggestion to make my setup better & faster. I want to reach the 2-2-2-5 timings since my RAM is capable of it. Motherboard Model: DFI NF4 Ultra D CPU Model: X2 3800+ Menory Type: OCZ42001024eldcper2k BIOS VERSION: 6-23-05 MEMORY SLOTS USED: 2-Orange Page #1 FSB Bus Frequency 250 LDT/FSB Frequency Ratio Auto LDT Bus Transfer Width 16:16 CPU/FSB Frequency Ratio x10 PCI-Express Frequency 100 K8 Cool 'n' Quiet Support Disable CPU VID Startup Voltage Control 1.5 CPU VID Control 1.25 CPU VID Special Control Above 123% LDT Voltage Control 1.3 Chipset Voltage Control 1.7 DRAM Voltage Control 2.8 **DRAM+.03 Voltage Control Disable Page #2 Dram Frequency Set(Mhz) 200 Command Per Clock(CPC) Enable CAS Latency Control(tCL) 2.5 RAS# to CAS# Delay(tRCD) 3 Min RAS# Active Timing(tRAS) 07 Row Precharge Timing(tRP) 3 Row Cycle Time(tRC) 07 Row Refresh Cycle Time(tRFC) 16 Row to Row Delay (tRRD) 03 Write Recovery Time(tWR) 03 Write to Read Delay(tWTR) 02 Read to Write Delay(tRTW) 03 Refresh Period(tREF) 4708 Write CAS# Latency(tWCL) Auto DRAM Bank Interleave Enable DQS Skew Control Auto DQS Skew Value 0 DRAM Drive Strength 6 DRAM Data Drive Strength 2 Max Async Latency 7 **DRAM Response Time Fastest Read Preamble Time Auto Idle Cycle Limit 256 Dynamic Counter Disable R/W Queue Bypass 16 Bypass Max 7 32 Byte Granulation Disable
×
×
  • Create New...