Jump to content

phenommm

Members
  • Content count

    18
  • Joined

  • Last visited

About phenommm

  • Rank
    New Member
  1. phenommm

    bios settings

    bump
  2. phenommm

    bios settings

    bump
  3. phenommm

    bios settings

    thank you very very much. if another one of you smart guys can look over that and confirm it before i try and maybe suggest which ones i might need to tweak incase i am unstable that would be awesome thanks. edit: one question i have for you cyber is why you have the read to write delay at 5 when the overclock guide says that 4 is overkill? edit2: another question i have is on the 32 byte granulation. did you mean disable(8 burst) or enable(4 burst) because i don't believe disable(4 burst) is an option. edit3: what is the benefit of having the DRAM Frequency Set at 166 instead of 200? ~anyone feel free to repond to my questions directed towards cyber if you know the answer.
  4. phenommm

    bios settings

    bump
  5. phenommm

    bios settings

    i know someone is going to tell me to go read the overclocking guide and i have read it many times. i just don't understand it very well.
  6. phenommm

    winflash problem

    thanks that worked now i just need to find out which settings to change in the bios and format windows since the winflash corrupted a bunch of programs.
  7. phenommm

    bios settings

    i am going to try to overclock my computer. i would like advice on which settings to try. the following list is the one i believe is correct: Genie BIOS Settings: FSB Bus Frequency - ? LDT/FSB Frequency Ratio - ? CPU/FSB Frequency Ratio - ? PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - StartUp CPU VID Control - 1.450v CPU VID Special Control - Avove VID * 110% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.40v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 17 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 4708 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 4 Max Async Latency - Auto Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ~~~~~~~~~~~~ if you believe i should try something else considering my computer please let me know. also if you could tell me which settings i will have to mess around with that would also help. thanks. the link to my memory is corsair
  8. phenommm

    winflash problem

    i put tmod's file name "EZBOOT" onto a cd and then i put the cd in and restarted my pc. the first time i tried booting from the cd which did nothing and caused it to go back into windows and the second time i tried going into the bios and it was still the old version. how do i flash the bios?
  9. i am trying to use winflash since i don't have a floppy and when i try to load the bios file it says it is not the same size as the main bios. any help is appreciated. thanks.
  10. phenommm

    Help Overclocking Please

    thank you very much. does anyone have any advice on how to overclock this memory?
  11. I would like some help going about overclocking this memory http://www.newegg.com/Product/Product.asp?...N82E16820145587 Which bios should i use and how can i burn it to a cd because i don't have a floppy drive? Also what other things should i overclock(besides the gfx cards because i know how to do that)?
  12. ok i have been reading a lot on these forums but i am getting very confused and i think it would be helpful if someone could point me in the right directions and tell me which steps to take first. i have been using my computer for about a month now and i finally got my new cpu heatsink. i haven't overclocked anything but i would like to. first step i think i should take is installing the heatsink. then should i flash a new bios? btw i don't have a floppy so how should i do this. then which thread should i follow to overclock the parts of my computer and which parts should i overclock first.
  13. phenommm

    fx57 cpu problem

    which bios do you recommend for me and is there a way i can flash the bios using the dvd drive instead of a floppy.
  14. whenever i boot up my pc it thinks i have an f25 instead of an fx57. does anyone know how i can fix this?
  15. phenommm

    SLI Mode

    Thats what I had done. Thanks though. Anyone know how i can reduce the LONG startup time? Quick POST is enabled already.
×