Jump to content


  • Content Count

  • Joined

  • Last visited

About sillykid

  • Rank
    New Member
  1. No I do not have an Ebay account.
  2. I bought this RAM thinking I would be able to OC higher. Unfortunately my 4400+ would not OC past 2.5GHz so I reverted back to my tighter timing OCZs. I've used it for less than a week but know that it will run higher then DDR500 cause I ran it with the DDR500 divider at 215MHz and prime stable for 24 hours. I'm asking for $200 which includes shipping (USPS, 1st Class Priority) costs for in states only an it will be shipped in original package too. Email me at [email protected] if interested. I can email better pictures if wanted.
  3. Thanks for all the response. That helps alot.
  4. I was wondering if I am replacing a CPU do I need to do a reformat like when you replace a Mobo? (4400 X2 to an Operon 180)
  5. sweetness thanks dragontattooz and exroadie
  6. Thanks. Is there a way I can manually change the timing instead of just having it on auto, enabled, or disabled?
  7. Where do I go in my bios to set the memory command timing to either 1t or 2t on a nf4 sli-dr?
  8. I had similar problems with my Lanparty UT SLI-DR but after asking around I finally found out that windows was actually shutting off the E port. Going into your ethernet power properties you need to uncheck the box that says "allow windows to turn off to save power" box. Then you have to go into the BIOS and manually setup the ethernet port again with the right MAC ID. That fixed the problem for me and the guy who told me this had the same problem with a nForce3 chip.
  9. My MOBO's nVidia Network Controller keeps dropping but it can be turned back on by going through the Genie BIOS and reactivating it and putting in the MAC address. It'll work for a little while but then it'll go out again. All drivers are up to date and so are the BIOS. Is there a solution to this problem?
  10. http://www.ocztechnology.com/products/memo...m_elite_edition This is the link to the new OCZ EL. Should I get these?
  11. Going to be running this: CPU: AMD Athlon 64 3700+ Socket 939 San Diego Core Mobo: DFI Lanparty nF4 SLI-DR Videocard: XFX PVT70FUNDE Geforce 7800GTX 256MB GDDR3 PCI Express x16 PSU: ENERMAX All in One Noisetaker Series EG701AX-VE SFMA(24P) ATX12V 600W and was wondering if DDR550 (G.SKILL 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 550 (PC 4400) Unbuffered Samsung TCCD Dual Channel Kit System Memory Model F1-3200DSU2-1GBLE) is going to be better then DDR400 (CORSAIR XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Unbuffered Dual Channel Kit System Memory Model TWINX1024-3200XLPT). Any suggestoins would be greatly appreciated and money doesn't matter so suggest whatever is the best for this setup including any other memory that you would suggest.
  • Create New...