Jump to content

evogre3n

Members
  • Content count

    138
  • Joined

  • Last visited

About evogre3n

  • Rank
    Member
  1. Alright, so basically, even if i get my cpu (hypothetically) down to absolute 0 (-273c?) i still wont be able to safely operate at 1.6v Alright thanks
  2. Well, I got my sandy up to 3.1ghz stable in prime, OCCT, superPI, BF2, F.E.A.R demo etc. The problem is I need to run ~1.6 and a bit to stabilize it here. The temps never go over 44c during max load... and idle down in the high 20's (SI-120 w/ Panaflo 85cfm) So my temps are fine etc. From what ive been reading, no matter what temps I have, i shouldnt run my CPU like this 24/7...and that confuses me a bit.. Because lets say i put some Mach II on it and get it to -50c... i still cant run my cpu safely at 1.6V? Could someone explain this to me... thanks alot
  3. evogre3n

    Amd 3700+ san diago overclocks

    thanks, i got the "luck of the draw" for my sandy... lots of the latest sandy cores are overclocking very well
  4. evogre3n

    Amd 3700+ san diago overclocks

    Sure does It primed at 3.1ghz aswell (9 hours overnight, then I stopped it) when i bumped the voltage to 1.675V But I dont have the balls to run my computer at that voltage 24/7
  5. evogre3n

    Amd 3700+ san diago overclocks

    Your vcore is too high, I got 3.1ghz on my sandy with 1.6V on the core, and I had the SI-120 on it, you just have stock cooling.. thats pretty dangerous, id recommend you stick around 1.5v, thats what im doing. Im running 2.9ghz @ 1.475V You would need over 3.7ghz to get into 16000 sandra arithmetic score, heres mine @ 3.1ghz CLICK IMAGE TO ENLARGE
  6. evogre3n

    My 1st time "sweet" overclock

    Alright, then ill stroll along at 2.9ghz and bench with 3.1ghz
  7. evogre3n

    My 1st time "sweet" overclock

    Then what would you recommend?
  8. evogre3n

    My 1st time "sweet" overclock

    poo Without the ~1.6V, windows doesnt want to load And everyone is sayings its too much to be running full time.. i guess ill stick with 2.8ghz for now More suggestions/comments etc. are welcome
  9. evogre3n

    My 1st time "sweet" overclock

    Well, alright some mixed views on the voltage.. Im certainly happy with 2.8ghz @ 1.45V which is safe zone, and at that speed, i dont see any load temps go over 35c Ill bench with 3.1ghz to be safe, or untill i get some more opinions, you dont notice 300mhz in normal day to day use, and when your already 100fps+ in games, I dont need 300mhz to get me up a couple frames... J054 - you mention 1.7 in the guide.. i didnt see anything there.. Also would you consider the Enermax Noisetaker 485W a good power supply?
  10. evogre3n

    My 1st time "sweet" overclock

    Thanks Alright here is my 32M score, Kaspersky AntiVirus popped out with an update message, and I had to close the message and shut down kaspersky during superpi, im not sure, but i bet that slowed superPi up a bit. Anyways, i pressed okay when it stopped so I dont have each loop time.. but here is the general shot Ill run through it again and post a non-interrupted version
  11. evogre3n

    My 1st time "sweet" overclock

    Thanks guys @ Alienwhere: This is the sweetspot right now, because I cant run it 310mhz , i was able to take it to 270mhz @ 2-2-2-8 w/ 3.5VDIMM and pass memtest, perfectly stable in windows etc., I didnt try 2-2-2-5 @ over 3.5 Ill play around with that and get back to you. @msmolt: coming right up @icon57: ya im aware, but HOPEFULLY i will manage to pass prime nice and smooth, we will see tonight Thanks for the feedback guys! (nobodies said anything about the voltages yet ?_?)
  12. After several months of waiting and reading, I finally got my system together, and tweaked it for the last couple of days. My specs are in my sig, but I will put them here as well. AMD64 3700+ Sandy core @ 3.1ghz (310x10) @ 1.475 + 113% SI-120 w/ Panaflo 85cfm OCZ EL GOLD VX PC3200 memory running at 5/6 divider (258mhz (DDR516)) -- memory @ CAS2-2-2-5 @ 3.5VDIMM DFI NF4 Ultra-D Bios 6/23 6800GT eVGA @ 402core/1.1ghz mem all housed within Antec P180 w/ 3x120mm fans. Heres a screeny with sandra benchmarks(memory and cpu), CPUZ 1.3 and SuperPI 1.4. CLICK IMAGE TO ENLARGE My load temps after 1 hour of torture OCCT never surpass 43c, I think thats pretty good considering the high clock, but I am reading that ~1.6V is too much for a san diego core.. should I underclock it a bit? Anyway, I just wanted to show you all my success after reading all the articles here and getting users opinions and help. note - i havent primed it yet, will do tonight, but 1 hour OCCT torture didnt produce error, neither did memtest, or OCCT 30min default test. Thanks all
  13. Hey all, My OCZ EL GOLD VX PC3200's are running at 3.3VDIMM, now I added an 80mm fan (custom memory mod) to cool them (just in case) and added a thermal sensor on top of the heatspreaders... (not totally acurate, but gives me a ballpark). Now my memory is running at 254mhz, so thats a pretty significant overclock and my sensors are getting 27c idle. Before I get the courage to up my voltage to 3.5V and try to make my system stable @ 2.9 to 3ghz, I was wondering what are good temps for my memory.. Google didnt find me anything relevent, so maybe someone has experience, or any thoughts on this? thanks.
  14. evogre3n

    I love DFI!~

    very nice congrats
  15. evogre3n

    OCCT Errors?

    Alright thanks, ill try that right away. Also I fixed my post, before it said 2.5VDIMM i ment 3.5VDIMM
×