Jump to content

thecoomar

Members
  • Content count

    36
  • Joined

  • Last visited

About thecoomar

  • Rank
    New Member
  1. small FFT's for cpu memtest for ram
  2. thecoomar

    Mem Divider and CPU x10 Multi

    i also lost the 150 divider when i put in a opteron 146, the opteron 144 and venice 3000 both saw it
  3. are you supposed to not have the karajan module inserted when using spdif?
  4. i'm having the same problem, should i take the karajan module out?
  5. thecoomar

    PCIE Freq

    i thought ati cards were supposed to run at 105, nvida cards at 100 or 101
  6. thecoomar

    Memory Dividers in704BTA

    using the 166 divider with that bios as well
  7. how do you read the vcore/vdimm with a multimeter?
  8. 1.7 volts to the cpu core, why?
  9. thecoomar

    Socket 939 Overclocking Database

    DFI LanParty NF4 Ultra-D 7/04-2 BIOS Venice 3000+ LBBLE 0519GPIW Enermax 485W Noisteaker Mushkin Blue C2 (BH-5 UTT) 2x512 Asus X700le Stock Cooler (i have an XP-120 that I will install later this week) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Genie BIOS Settings: FSB Bus Frequency - 290 LDT/FSB Frequency Ration - 3x CPU/FSB Frequency Ratio - x9.0 PCI eXpress Frequency - 105Mhz CPU VID StartUp Value - 1.5 CPU VID Control - 1.5v CPU VID Special Control - Auto LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 3.3v DRAM Configuration Settings: DRAM Frequency Set - 166 (DRAM/FSB:5/06) Command Per Clock (CPC) - 1T CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 2 Min RAS# active time (Tras) - 6 Row precharge time (Trp) - 2 Row Cycle time (Trc) - 08 Bus Clocks Row refresh cyc time (Trfc) - 12 Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 01 Bus Clocks Refresh Period (Tref) - 3120 Cycles Write CAS Latency (Twcl) - 5 (Will pass memtest at 1 but crashes in games) DRAM Bank Interleave - Enabled DQS Skew Control - On DQS Skew Value - 0 DRAM Drive Strength - 8 (I used 6 for the last couple months) DRAM Data Drive Strength - 1 Max Async Latency - 7.0ns Read Preamble Time - 5.0ns IdleCycle Limit - 16 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(4 Bursts) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ prime95-10 hours +cpu-z (2) +3dmark01 +3dmark03 +screenshot of 3dmark05 http://www.filefarmer.com/coomar/DFIprime.JPG 3dmark05 aquamark3 everest read http://www.filefarmer.com/coomar/everest_read.JPG everest write +A64 Tweaker http://www.filefarmer.com/coomar/everestwrite_236.JPG everest latency +A64 Tweaker http://www.filefarmer.com/coomar/everestlatency_236.JPG
  10. thecoomar

    140 (7/10) RAM divider does not work.

    i use max latency 7 read preamble 4 all the dividers work (though the memory can't handle 9/10) at 2.6
  11. thecoomar

    NF4 L/P Ultra-D Thermalright Heatsinks

    I guess I could see how having the xp-120 fan run full-speed would disrupt airflow its going to push all the air down and swirling around the mobo they'll be a large pressure void above the heatsink generally the strongest case exhaust fan and PSU exhaust are taking that air as well
  12. thecoomar

    140 (7/10) RAM divider does not work.

    i'm using 2.6 with the 7/10 divider
  13. thecoomar

    AMD64 MHZ vs Memory timings

    your hypothetical situation, the 250 will be faster but 30-40 more mhz with a divider will outperform it a64's run on divider anyway, 1:1 is an illusion
  14. thecoomar

    3DMark05 scores....post yours!!

    2954 http://service.futuremark.com/compare?3dm05=1005958
  15. thecoomar

    NF4 DAGF> memtest setting

    some of the newer bioses have 1.6 on them 623 does I think
×