Jump to content

desire

Members
  • Content Count

    104
  • Joined

  • Last visited

About desire

  • Rank
    Member
  1. dram config loosen max async latency and read preamble. I am running 11ns and 8ns respectively.
  2. 56, 57, 58 degrees is not really a very good temp at all for having an xp-120. xp-120 is not good for naked cores. you most likely dont have as good of contact as you think http://xtremesystems.org/forums/showthread...ht=naked+xp-120
  3. Where the heck is my sig? Ok so my sig doesnt show up if i quick reply? weird...
  4. If you are failing on small FFT setting, most likely cpu. Anything else is a crapshoot if you are not isolating cpu or ram like thunda said
  5. Begin threadjack/sidenote I was just about to post a question about this. I was trying to boot my sempy at 338x8 and it would just hang and I remembered reading about loosening MAL and RP for high HTT's and alas it works. MAL = 10, RP = 7 for now. Trouble booting at MAL=8 and RP=6. Hopefully I can get down to 9 and 6.5 :/ End threadjack/sidenote
  6. 240mhz is the correct frequency. After a quick look through a64info the only way you can get 250MHz RAM is if you OC more than 2400MHz on your CPU. 250x10=2500mhz 200 divider = 250mhz ram 313x8=2504mhz 166 divider = 250.4mhz ram
  7. ok according to that site one is 2M 3.3V and the other is 2M 5V so I guess they both wont work. Does the nF3 250GB use the same type BIOS as the nF4 Ultra-D?
  8. I've got some extra BIOS chip laying around and I'd like to use them to backup/try new BIOS' on my Ultra-D. Does anyone know the size of the chips on the Ultra-D and how I can identify the size of the other chips? TIA
  9. Total score: 87,628 GFX: 12,678 CPU: 14,184
  10. http://www.dfi-street.com/forum/showthread.php?t=24926 he got lucky with an 0521bppw then. didnt he?
  11. My entry is up. I didn't know there was a 10 image maximum per post so some of the pics are just links :/
  12. DFI LANPARTY nF4 Ultra-D (704-2BTA BIOS) AMD Opteron 146 Venus/San Diego 2x512MB OCZ EL Platinum PC3200 Revision 2 (TCC5) eVGA 6800GS 256MB PCI-Express ( 485/1320 82.12 Drivers ) Westen Digital 40GB IDE HDD (8MB cache) Samsung 250GB SATA2 HDD (8MB cache) LG GSA-4163B DVD Writer OCZ PowerStream ATX 520W Power Supply (OCZ520ADJSLI) Thermalright XP-120 Thermaltake A2018 120mm Fan (93.7CFM) ========== BIOS Screens: http://img381.imageshack.us/img381/1294/genie19hd.jpg http://img391.imageshack.us/img391/9529/genie23cl.jpg http://img381.imageshack.us/img381/2605/dram15uf.jpg http://img381.imageshack.us/img381/8738/dram26ky.jpg ========== [b]Genie BIOS Settings:[/b] [color=navy] FSB Bus Frequency - 300 LDT/FSB Frequency Ratio - Auto CPU/FSB Frequency Ratio - 10x PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - StartUp CPU VID Control - 1.525v CPU VID Special Control - Auto LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.60v DRAM Voltage Control - 2.70v DRAM+.03v If it's not 3.2v - Enabled[/color] [b]DRAM Configuration Settings:[/b] [color=green] DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 07 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 11 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 4708 Cycles DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 (Weak 4) DRAM Data Drive Strength - Level 2 Max Async Latency - Auto DRAM Response Time - Normal Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16x Bypass Max - 07x 32 Byte Granularity - Disable(4 Bursts) [/color] ========== Prime95 + 3DMark01SE + CPU-Z 1.33.1: 3DMark03: 3DMark05: 3DMark06: Aquamark3: Everest Read: Everest Write: Everest Copy: Everest Latency: ========== Short Description: 300x10 (3000Mhz) @ 1.525v 2.5-4-3-7 @ 2.73v vDimm
  13. Praz your 3DMark05 shot is at 2950Mhz and the rest are at 3024MHz My entry 146 opty will be up within a couple of days.
×
×
  • Create New...