Jump to content

eyepiz

Members
  • Content Count

    70
  • Joined

  • Last visited

About eyepiz

  • Rank
    Member
  1. How does that Asus A8N32-SLI compare to the expert??? OC better or worse ect.. I just about had it with this board Im on my second RMA and it seems to just get worse, first the boot issue then the floppy stopped working I thought no biggie I shall just get another floppy drive, got a new one and the mobo still does not recognize the floppy and to make things worse the mofo bios settings reset to default after a cold boot now. Im going the send the peice of junk back and eat the 15% restocking fee..
  2. One thing I see most of us have in comon is the OCZ PowerStream 520W I got my second board bac from RMA and still have the same problems.
  3. I just jumped on the RMA wagon after many hours of tweeking & swaping parts with no luck... any u guys having luck with the boot issue?
  4. damm I got the same problem I has hoping it was just a bios issue but looks like I got to RMA too...
  5. Hey guys.. What are normal IDE & Load temps for this Board? and what is to hot when pushing vcores up. I am using smartgardian to monitir the temps Thanks!
  6. Has anyone tried this bios?? I have TCC5 and runs like crap no better than my NF3 939 Ultru...I wonder if it's worth the flash.
  7. 260 failed for me I tried 260HTT with my same settings as 250 and 8 Hours memtest stable but fails superPi withen one minute fails prime too. can you post your settings genie bios settings please. Thanks!
  8. :mad: made no diference on my box...
  9. 1000 Points! dam going to have to try that...
  10. Does this do anything?? Default is 100Mhz does uping the frequency help overclocks in any way...
  11. Any luck getting Stable over 250HTT?? I'm 100% stable @ 250 Right now I'm going to try 260 tonight. these are the setting in using. Genie BIOS Settings: FSB Bus Frequency............................. - 250 LDT/FSB Frequency Ratio....................... - x 4.0 CPU/FSB Frequency Ratio....................... - x10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - Auto CPU VID Control............................... - Auto CPU VID Special Control....................... - Auto LDT Voltage Control........................... - Auto Chip Set Voltage Control...................... - Auto DRAM Voltage Control.......................... - 2.92v DRAM Configuration Settings: DRAM Frequency Set............................ - 200=RAM/FSB:01/01 Command Per Clock (CPC)....................... - Disabled CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 4.0 Min RAS# active time (Tras)................... - 6.0 Row precharge time (Trp)...................... - 3.0 Row Cycle time (Trc).......................... - 07 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 02 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles Write CAS latency (tWCL)...................... - 01 Bus Clocks DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Level 11 DRAM Data Drive Strength...................... - Level 1 Max Async Latency............................. - Auto DRAM Response Time............................ - Fastest Read Preamble Time............................ - Auto IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) I shall keep ya posted.
  12. Does everbody elses boot up screen look like the pic below? I was reading a thread over at xtremesystems and came across this pic and was suprised how good it look my boot up screen look like a 16 color bitmat version of the pic below. Im just curious why mine looks like crap...
  13. Anyone? I think I found part of the problem I changed 1T to 2T seems more stable
  14. Hi guys, my problem is that i can't seem to get this board stable no matter what I have everythink @ stock speeds all settings in bios are default except raid is set for sata 1 & 2. windows is very unstable prime 95 stops after 2 seconds all components are the same ones used on my prior nf3 ultra 939 set up except the video card. Please help..
  15. Do u have any more suggestions for DDR600 2T?? I have seem to hit a wall at 275FSB DDR550 memtest reports like 12 errors in test no 7.
×
×
  • Create New...