Jump to content

grozni

Members
  • Content count

    15
  • Joined

  • Last visited

About grozni

  • Rank
    New Member
  1. grozni

    bios resetting?

    I have SLI-DR Expert, simmilar problem. But my bios is good after reboot. Only if I disconnect power cable bios clear by itself. Battery is also good. Any suggestions? Thanks
  2. I tried that also, from the moment I Run dual prime, PF immeditely jumps to 1.6Gb. How to fix this? I putted as said 700MB per prime
  3. Still no answer what is the proper settings when running 2 instances of prime and using 2GB memory. I set to 800MB, and prime still using PF, shows like 1.36Gb. HOw to fix this, how to tell prime not to use PF. Thanks
  4. grozni

    Ballistix and Expert

    Did anyone heard about Expert and Opteron 170 incompitability?
  5. From last night I'm trying to get system stabil with Ballistix and DFI Expert, no luck....I 'm stuck I need a little help, I was not able to get stability in windows in anyway, but memtest runs with no errors. I tried latest official bios, and 704-2BT. Settings. ENA-3-3-8-3-7-13-2-2-1-3-3072-1-ENA-AUTO-0-8-3-7-NORMAL-5-256-ENA-16X-7X-DIS This is on default 250FSB, I tried various combinations changing DRAM Drive Strenght from 7-10, lowering TREF, lowering TRCD and TRP back to factory defaults, DRAM data strenght to AUTO, higher timmings for Read Preamble and Max Async, main difference was I was able to enter in windows and then crashes with one settings and other setting was when I trie entering windows BLUE Screen. Few times I was able to run prime but crashes and reboots immeditely. Also tried this settings on 270FSB ENA-3-4-8-4-12-24-3-3-2-3-3120-1-ENA-AUTO-0-8-3-9-NORMAL-6-256-AUTO-16X-4X-DIS Same as above Before Expert I had Ultra-D never had any problems with Ballistix and Ultra-D. I bought Expert because 3rd PCI slot and was hoping some higher stabil clock, but instead I have a big hedache. Can someone help on this please, from this position I would say these two components can't work together. I'm writing this and in my computer is Kingston Value now, no problems at all. Thanks a lot, help appreciated.
  6. grozni

    DFI and Opteron

    I tried other PSU, same thing same problem. I solved it. All I done was I set DRAM Drive Strength to AUTO, before value was 7. I'm now on 1.4V @ 2.5Ghz. :D :D
  7. grozni

    DFI and Opteron

    I jumped to conslusions early It's not Yamaha fault, same happen later, reboot, lock, bad....I will definately try other PSU and post results, something will fly out of window :nod: I lowered voltage to 1.41 it was running prime like 13h normaly, before that S&M was running like 90min. and SCCT was running for 30min. all was error free on 1.41...stange. I pulled out 4-Pin Peripheral from mainboard and turn on PC and it hang when showed CPU code that never happen before. So I think it is definately related somehow also to PSU. Putted back 4-Pin Peripheral, normal POST. This is 20PIN PSU after all.... I can't get 1.45V when I put 1.45 it is 1.43-1.44, when I put 1.425 it is 1.41. I tried various combination I couldn't get 1.45V, also 1.475 shows 1.46 and so on.. I did try, same thing...... Yes all is even 100% stabil on 1.41V as I said.....
  8. grozni

    DFI and Opteron

    I have 3 optical Anyway, I have disconected Yamaha, I reset 3-4 times and it is working for now fine :nod: Thanks, I tried lowering voltage to 1.425 (board shows 1.41) and it was the same, hangs on first screen after reset. I discionected all 3 optical on that voltage 1.41 same thing. I called friend I will try his PSU I think he has Thermaltake 680W practicly new one week old. I will try on this voltage 1.41, but if it is not working I'm happy with 1.44, so if Yamaha is causing problems it will fly thru window definately :shake:
  9. grozni

    DFI and Opteron

    Why is that ? I have never had any problems with it......of course I will try with another PSU, that is not a problem. I like this PSU because of UV cables...thanks
  10. grozni

    DFI and Opteron

    Anyone with some hint? I have never had this problem, before Opteron I had San Diego 4000+. All configuration was the same, and also running SD at 250x10, but San Diego default is 2.4Ghz . Thanks
  11. grozni

    DFI and Opteron

    I have a following problem.....I have opteron 170 which is working on 2.5Ghz, 250x10, and almost every time I reboot windows system hangs on first screen I see Award bios version, but CPU and memory info are not showing, then I reboot on button and everything is normal again. Curently CPU is running on 1.44V, 100% stabil in windows, all test and all I tried is runing normal on this voltage, I play games also normaly, but have this problem when rebooting but not everytime. I lowered voltage to 1.41V all the same except when I reboot have a little line near sign where says award, but also all test I run and all games 100% stabil, dual prime was running about 15h no errors. +12 rail says 12.02 sometimes and sometimes 12.09, +5V rail 5.04 all the time. Memory is running at 2.7V but it is just fine with 2.6V. CPU steppings says JH9-E6, as in signiture I'm using 6.23 offical bios, also tried with 702-3, all is the same. Can someone help on this please, much appreciated guys?
  12. grozni

    Zalman Cnps9500

    I have Chieftec Dragon series with one extra cooler on the back. Thanks guys
  13. grozni

    Zalman Cnps9500

    Can someone please help on cooler selection. As I said I have Dfi NF4 Ultra-D, should I buy Zalman 9500 or ThermalTake Big Typhoon for opteron 170?
  14. grozni

    Zalman Cnps9500

    I don't want to open new thread, no need, I have a big dilema. I'm not sure what to buy, Zalman 9500 or Thermaltake BT. I have DFI NF4 Ultra-D, I planing to put some of these coolers on opteron 170. Can you please tell me which one is better in your opinion? Thanks
  15. Can somebody tell me whish of these stepping is good for overclock Venice, all steppings are for 3000+ 0516 CPCW 0518 APDW 0516 BPCW Thank you
×