Jump to content


  • Content Count

  • Joined

  • Last visited

About jodhas

  • Rank
    New Member
  1. I've done this mod a long time ago and have been using 6600GT. My friend was upgrading and he gave me his 6600GT! (same company XFX Geforce 6600GT). I installed the video card and installed the driver. but nowhere does it have an option for me to enable SLI. from what I know 6600GT SLI is possible without a bridge. Do I need to change the BIOS settings? Pin settings? Its been a while since this thread opened. But I hope I can get some help!!!
  2. Thanks... Would I need to update my bios? thanks.
  3. Yeah, the boot drive is the raptor... It's in RAID 0. Two 36 GB Raptors... So I do need the RAID driver. I always used the floppy to "load" the drivers. BTW Thank you for such a quick reply.
  4. I've done a bit of searching "integrating drivers, slipstream, etc..." but I couldn't find it so here I am to ask for some help. I find it increasingly annoying to even put in a floppy drive. Alas, one failed on me and I decided NOT to buy a floppy. I need to do a fresh install of Win XP and I need help from 'yall to either 1. Guide me through the steps or 2. Point me in the right direction in how to integrate the latest drivers (especially the RAID) Lanparty nF4 Ultra (modded to SLI). Thank you for your help DFI gods! =) edit edit!!! Oh, BTW... My BIOS is 704-2BT. Is there "improved" BIOS(s) out there? Thanks...
  5. I have 2x XFX 6600GT ( PV-T43G-NDF3). Both Purchased from Newegg. I have them SLI'ed right now. However, under games such as battlefield 2 and call of duty 2, the computer just crashes. They are same cards with same part number. However I realized that one of them has Ver. E.1 and the other has Ver C.3 on it. What is the difference between the two? Is the difference whats making it crash? Can I download a bios somewhere and flash them to identical BIOS? I'd appreciate your help BTW I'm not using the bridge connector. Is that the problem?
  6. Bump! My Location: La Crescenta, CA, USA PLEASE SOMEONE HELP ME RMA THIS BOARD The Board is under warranty, it was purchased from Newegg so I have the invoice as well. I really need to rma this board.
  7. My Location: La Crescenta, CA, USA PLEASE SOMEONE HELP ME RMA THIS BOARD The Board is under warranty, it was purchased from Newegg so I have the invoice as well. I really need to rma this board.
  8. I've been running A64 3200+ Winchester, 6600 GT, OCZ powerstream 520 OCZ EL DDR PC-4800 Platinum Elite Edition Raptor 36 x 2 RAID Friday Night, I left the machine on for a big download, Saturday Morning the computer was frozen. I reset the machine but the darn thing wouldn't boot. I opened up the computer to see that the 4 LED was on. After bios flashing, no luck. I took the mobo out trying to isolate the problem but couldn't do it. Today I went out to frys and bought a A64 x2 3800+ and ECS Mobo. On the ECS mobo, the cpu, video card and memory works fine. I popped in 3800 in the LanParty and It stills stuck at 4 LED. I KNOW I need to RMA this mobo. Can this happen? 15 years of system building this is a FIRST!!! I believe I exausted ALL POSSIBLE METHOD! Can I get RMA information please?
  9. Thank you for your reply. This is NOT a new build. I've had the system for about 5 months. Basically, on SATA 3 slot I have the Raptor 74 on SATA 4 slot I have the WD250 I had windows installed and have been enjoying it until 4 days ago. I turned the comp and and it would just hang at bios. I pressed 'TAB' to see what was going on and it would just get 'stuck' at the BIOS screen trying to detect the IDE devices. It will not get past that. I've tried using my Raptor 36, and Maxtors to no avail. It jsut simply will not go past the initial BIOS POST screen. Sometimes I would flash the BIOS (the complete way, by taking out the battery, etc...) and it would go PAST the BIOS screen but without detecting the ANY SATA drives. On the next boot, the problem begins again where it will NOT go past the INITIAL BIOS SCREEN. I have 4 red DIAG LED on when I reboot and the system hangs at the BIOS Screen. I have the OCZ POWERSTREAM 520 which has been really steady. I've tried the Antec Purepower and it does the same thing. I've tried using different RAM as well. (well, it's Mushkin PC2700 Basic) but it does the same thing. Instead of going DUAL channel, I've trided just sticking 1 stick in slot 1 but that does not make any difference. I'm beginning to think something terrible has happened to my mobo......
  10. I've also tried using different BIOS to no avail. I'd hate to RMA this board but just use it with the problem fixed...
  11. The problem arises even before we start going in to the Windows boot screen. Why am I getting these problems? I've exhausted all different combinations of SATA connection methods but to no avail. There are DFI employees in here, right?
  12. It hangs at Detetcing IDE..... Also, sometimes it goes PAST the Boot Bios Screen but DOESNT RECOGNIZE ANY SATA DRIVES! What's up???
  13. BTW... DFI website is VERY sluggish, and doesn't load at times... Not only today but many times in the past as well... Anyhow... I wish someone can address my problems mentioned above. Thanks.
  • Create New...