Jump to content

Jester FPS

Members
  • Content Count

    39
  • Joined

  • Last visited

Everything posted by Jester FPS

  1. What type of HSF do you got and how many volts are you feeding the cpu? The mobo temps look normal, as mine idles around 44 C also, but my cpu sits at 25 C on idle...
  2. Thanks for the warning angry_games, I had ntune installed already so I quickly un-installed it. I solved the problem somehow, here's what I did. 1) Un-installed the smartguardian that I had 2) Re-installed the smartguardian program from DFI retail disc 3) Re-boot 4) Still had 128 C error 5) Attempted to shutdown, computer hanged 6) Manually turned off the PSU and let everything "whir" down 7) Turned computer back on, and smartguardian read temperatures fine I have one last question, regarding my NB +1.5V and should I be concerned with it's voltage?
  3. I checked my fans + cpu fan and everything is working properly but I still get this read error....see pic below.
  4. no, the only reason why I said it, was because davidhammock said the same thing at EOCF. Link: http://forums.extremeoverclocking.com/show...725#post1718725
  5. wouldn't the ocz vx, be ideal for a cpu with higher multiplier? I think the platinum would be better for his cpu
  6. You can always trial & error... see which configuration cools best for you..
  7. Nice air cooling, I'm also cooling my rig with a total of 9 fans (including psu)....it's very loud
  8. Sorry to intrude on your thread nos7955... but this question is for audscott. Are you overclocking on all-air?
  9. How long did it take for your memory to die on you? I've had no problems running my ram at 3.3v at 200FSB for weeks now, it's been rock stable. I also have one 80mm fan cooling the vdimm, and i've used the 4v jumper trick. Which jumper setting were you using?
  10. yeah, or dig up an exact link where the cpu was bought.
  11. Put it this way, have you flashed at all since you received your DFI mobo in the mail?
  12. I'm currently burning in my vx 4000 in slots 2 and 4, it's been going 40+ hours (shooting for 48 hours) and there have been 0 errors. 200 FSB, and 3.2V to the dram.
  13. Which bios are you running, and put it in your sig next to your mobo.
  14. It may very well just be the chip, as all cpu's are different. You can't go wrong with the FX-55, if you don't mind spending the extra money. If you are cost conscious, I'd say go with the 4000+ SD.
  15. Have you tried updating the drivers to the latest?
  16. 3.4v was angry_games specifications. It all depends on your specifications (eg. setup, type of ram, overclock). I was able to get everything up and running fine after doing the following: -switching the 4v rail little jumper i was using (the blue jumper that came with my board) with a better hard drive slave/master jumper -following angry_games and Rgone's specifications for bios (search) -rebooting several times I once had my psu 3.3v rail exactly at 3.30v...then upon rebooting it went down to 3.28v. so I have now set it at 3.33v this stuff can get confusing :nod:
  17. I'm having a bit of a problem selecting 3.3v in the DRAM Voltage Control. I am using a OCZ PowerStream 520w and I have set the rail at roughly 3.35v. I upped it all the way up to 3.5v to see if that would allow me to select 3.3v in the DRAM Voltage Control but all I'm getting is 3.2 selectable. Mind you the BIOS settings are "out of the box" and I've never built a gaming rig before.
  18. For the DMM, which setting do we set it at to read the voltage?
  19. Thanks for everyone's help. I'm about to set up the system and so far i've done added the following to the to do list in order Things to do list: -Setup bios savior -Setup 4v jumper trick -Test memory using memtest -Flash BIOS with one stick of RAM in slot 2 -Install xp pro -Burn in memory If you have any additional advice, please post. Thanks again.
  20. That I will do using memtest. Also, should I take one stick of VX 4000 out when I flash? I've heard of people having a stick die on them after flashing...
  21. Hello every1 It took me months to build, but it's finally complete. Now I just need help setting it up without killing a component. My specs: (all air cooling) AMD 64 4000+ Rev. E XP-90 + Panaflo 92mm DFI N4 Ultra-D OCZ PowerStream 520w WD Sata Raptor 74gb 10k RPM Evga 6600 GT 1GB OCZ VX 4000 (80mm fan, active cooling) Things to do list: -Update BIOS -Install xp pro -Burn in memory ^ that's all I have for now. I also have a question regarding a 5v jumper or 4v jumper..? What is it, and do I need it? I have the 4 plug P4 plugged into the slot to the left of the 24pin connector. Any other advice/warnings to get my system up and running is greatly appreciated.
×
×
  • Create New...