Jump to content

oc newbie

Members
  • Content Count

    559
  • Joined

  • Last visited

Everything posted by oc newbie

  1. Ace if you got the time to throw me one together I would be very grateful. I suck with photoshop so anything would be cool by me.
  2. Look at the windows and they are all highlighted like they are the only open window, pretty lame imo. edit- LOL i just noticed how bad the 06 pic is.
  3. Well like lowboy said it probably corrupted your os after running for that long not being stable. You might want to reinstall and run prime to make sure your settings are not going to corrupt the os again. It is at least worth checking out, a good friend of mine had the same thing happening to his system but it was not taking that long to make his system unusable. In his case it was a few ram setting's that were to tight but his second harddrive was doing the same thing your's is. You should think about getting a stronger power supply, 430 is really too low for these board's.
  4. He is talking about prime 95 a program that test's a system to see if it is stable. edit- not sure why my sig didn't show up lol
  5. jcll2002- It varies due to ambient temps where you are but mine dropped about 8 degrees under prime load and as far as noise i can't even hear it over my cpu fan but I don't have a silent system.
  6. Yes you can use the ultimate edition. just be sure to follow the rules exactly so happy can stay happy. lol
  7. theFlowerKing- You may be right about this chip doing 3100, with an extra .25 on the volts it lasted over an hour and a half on prime.:eek: So im just waiting for this heat wave to get over and then ill be working towards my next clock. Gonna do some more case mods and see if i can get some better airflow, wish me luck.
  8. Sounds good to me, when i got mine i picked 1 up for a buddy and got the exact same stepping. After i get him to spend some money on a real power supply we will see if his can do the same. Even on his no name pos ps he is running at 2800 prime stable but his rails drop way too much to leave it there.
  9. I think ill check one of those out while i save up for some h2o cooling, its not normal being this damn hot here. were normaly getting wet most of the time, just got hot because i had this new chip to burn in. hopefully it wont last too long i want to push this cab1e even further.
  10. Thanks man and im gonna push this thing hard once it cools off, only cost me $120 so not to worried if i push too hard. Been thinking about going water too but just dont got the funds quite yet.
  11. Well i got tired of waiting for it to cool down so my ocdb entry is up. This chip is awe inspiring lol, was kinda funky that it would fail prime at 300 even with more volts but bumping it up to 301 and it worked great. I will push for more once it gets colder here 102 degrees today so my temps were really high but i wanted to get this done. cab1e 0614epaw is looking like a great stepping at least for me. http://www.dfi-street.com/forum/showpost.p...7&postcount=260
  12. DFI LANPARTY nF4 ultra-d modded to sli-d (704-2BTA BIOS) AMD opteron 146 (cab1e 0614epaw) xp-90 air cooled 2x1024MB OCZ PC4000GOLDXTC(OCZ5002048ELGEGXT-K) EVGA GeForce 6800GS, 500/1200 81.98 drivers 320GB Western Digital 7200RPM SATA hdd 250GB Western Digital 7200RPM SATA hdd Lite-on 16xDVD Burner Ocz Modstream 520w Power Supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 315 LDT/FSB Frequency Ratio....................... - 3 CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - auto CPU VID Control............................... - 1.400 CPU VID Special Control....................... - 110% LDT Voltage Control........................... - 1.20v Chip Set Voltage Control...................... - 1.50v DRAM Voltage Control.......................... - 2.60v+enable[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 166=RAM/FSB:05/06 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 3 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 4 Row Cycle time (Trc).......................... - 11 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - normal level 3 DRAM Data Drive Strength...................... - level 2 Max Async Latency............................. - 8ns DRAM Response Time............................ - Normal Read Preamble Time............................ - 6ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003 + Everest: 3dMark2005: 3dMark 2006: ========== short description: air cooled with lapped xp-90/vc-re cooled chipset 315x10 @ 3150Mhz, 1.40+110% = 1.54 cpu voltage 262fsb @ 3-4-8-4 @ 2.60v vdimm
  13. If i could i would but only for about 12 hours lol. its a little cooler this morning so im running it again and cpu temp is now 51 instead of 56 so hopefully i will get it posted later today.
  14. Running at 300x10 but its way to hot right now to finish prime as soon as it cools down ill be getting in the database. thanks for the encouragement and this chip is by far the best ive ever had. it lasted over 3 hours before the temps started scaring me at 55-56 but a ambient temp of over 37 outside is adding to that. got this chip for 119.99 from monarch and just got it yesterday so hopefully theres more to come out of it.
  15. Priming my ocdb entry now and just found this thread. I think i got very lucky with my cab1e 0614epaw primes been running for a couple hours and im still at stock volts. Got to change my sig again. well system froze up so guess it will have to wait till it cools down outside, it is like a 105 outside and no ac. lol
  16. i just got a cab1e 0614epaw from monarch and so far this chip is awesome, so id say go with the opty 146.
  17. http://www.monarchcomputer.com/Merchant2/m...gory_Code=amdop 119.99 for an oem opteron 146, i wonder if its a typo or something. might have to grab me one for a backup chip.
  18. i got the same stepping as you and mine does 2850 on stock volts but to get to 3000 it takes me 1.58volts and runs way too hot for my tastes.
  19. http://ryanvm.net/forum/viewforum.php?f=9 This pack seems pretty legit and i have used it without issues before but it is best to build it yourself, but it takes along time to do it yourself. that forum has alot of information about slipstreaming and addons as well as silent switches for programs.
  20. Not a problem man like i said it took me about a week to figure out what was causing it but when i did i almost wanted to laugh. gotta love ms
  21. if you run windows x64 it is an easy fix 32bit i dont know for sure. its a windows update of the kernal and is not even for security, KB914784 u can easily remove it from add and remove programs with show updates checked at the top. it messed with me for about a week before i figured it out but i havent seen a fix on 32bit or if the issues happens there. my guess is they didnt get it out to developers before releasing it so expect new versions of both programs soon.
  22. I was using 64bit and they caused me nothing but problems, also affecting other programs.
×
×
  • Create New...