Jump to content

oc newbie

Members
  • Content Count

    559
  • Joined

  • Last visited

Everything posted by oc newbie

  1. LOL I just watched waynes world like 3 days ago. Well I tried to see if I could get any lower times last night but could only match those. Someone will come along and shatter those times eventually. I remember someone mentioning some dice was coming so could be sooner than later.
  2. 1.58 Seems like the sweet spot for this 146 3290 pi run took 1.62 but failed with 1.65. Man I wish it would prime that high. But only needing 1.456 for 3g's sure is nice. Kinda glad it don't like lot's o volt's. Oldguy- That tip for trying 2.9 is the main thing that kept those pi run's stable 2.8 failed the 32mb test when I tried it. Big thanks my man.
  3. Thank's guys took some time to get used to this tccd but it is doing great now. I am still in shock at just how great this chip has been.
  4. I think my chip doesn't like too much voltage probably because of heat issues. 1.65 volts was failing at the same clocks 1.59 passes. One of these days i'm gonna have to get around to watercooling it to see just what it will do. Just don't have the funds right now.
  5. Well 3300 was a no go but here is the 3290 I think it'll work for now. Man that 3300 was looking sweet cut off more than a tenth of a second through 10 loops but just wouldn't finish. Okay think I am finished with pi's for at least a little while.
  6. Sweet right now were in the 60's so my temps are much better now. Gonna shoot for a 3300 1 meg right now passed 3290 so bumped up the voltage and did a little dance for it.lol
  7. Thank's Clay I think it was the lottery winning chip for me. Dropping my 1 meg time now running 3280 got me 25.546 but still tweaking some more now.
  8. Yep still on air but we got some rain yesterday so much lower ambient temps. I wasn't expecting it to pass 32m at 3250 so it was a nice suprise. Half way through the run I kept thinking it was gonna fail when I seen it was more than 10 seconds faster than my best run. It wasn't even fully tweaked so I'll run it again this weekend sometime. Scared myself though right as it finished my screen went black .............. then I remembered that the damn screensaver wasn't turned off LOL.
  9. Well it sure is nice now that it has cooled off here. Got some new pi times up there and this tccd might not like running 2.5-3-5-3 but doesn't mind a low a$$ed tras. By far the best I have pulled off yet kinda in shock right now. I think the 1m might drop some more since 32m passed at 3250.
  10. Not sure how long it has been out a friend just let me know last night. Just getting it installed to check it out. http://www.americasarmy.com/downloads/
  11. Think this tccd is coming around a little better now. Starting to get the timing's tighter and got a better pi 1 meg time but was too busy trying to get under 26 seconds and forgot to get a screen shot. Updated my ocdb with them but still can't get below 2.5-4-8-3 to be prime stable. MAL is still to loose but anything under 10 and prime crashes after a couple hours.
  12. I ordered one last nite and have a tracking # already. I am not sure why but everytime I place an order with them it makes me paranoid. Guess I have heard to many horror stories about them from people that can be trusted.
  13. Right now TOOL stinkfist @allthatwhichis- That sounds really cool man.
  14. I'll admit to being hooked on tweaking ram setting's so I am far from done playing with these. Still think my favorite ram to play with was bh-5 followed by the ch-5 I wish were here with me. Do we ever really give up? lol
  15. Prime stable is [email protected] but 2.5-4-7-4 seem's good just haven't run it all the way. Still on 1t but look's like time to play around with 2t.
  16. These sticks just don't seem to like tight timings on or above 300. At 310 2.5-4-3-7 prime didn't fail............. But the BSOD sure pissed me off quick. :mad: I think i'll have to leave the timing's where they are for now.
  17. I think it'll be the uccc in the expert for awhile so I can get a feel for it. Gotta feeling it will become my gaming rig once I get it in a case. But of course i'll have to switch chips and ram around for benching and ocdb entries. Getting ready to fire up prime at 300 2.5-4-7-3 to see if it plays nice. 310 that tight I wish these would do but can't really expect that for the 116 they cost me.
  18. I would love to get a pi run at 320 but so far that's a dream lol. Gonna start concentrating on the expert board next week so gotta figure this ram out pretty quick.
  19. So far these sticks I picked up don't like 2.5-3-3-5 at all. 2.5-4-3-7 seem's ok but still gotta prime and update ocdb.
  20. TFK- If you would that would be cool, First time I have really got to clock with tccd. I've set up a few stock 2-2-5-2 systems for people but never really got to push it till now. Think I'll shoot for some better timing's tonight. I think I found the post your talking about.
  21. OCDB 300 1:1 This cpu is already in the list just figured I would link to my newest entry with tccd ram. Now gotta see if I can tweak the timings a little tighter.
  22. DFI LANPARTY nF4 ultra-d modded to sli-d (704-2BTA BIOS) AMD opteron 146 (cab1e 0614epaw)xp-90 air cooled 2x512MB teamgroup PC4000 tccd EVGA GeForce 6800GS, 500/1200 91.47 drivers 320GB Western Digital 7200RPM SATA hdd 250GB Western Digital 7200RPM SATA hdd Lite-on 16xDVD Burner Ocz Modstream 520w Power Supply * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 300 LDT/FSB Frequency Ratio....................... - 3 CPU/FSB Frequency Ratio....................... - 10 PCI eXpress Frequency......................... - 100Mhz CPU VID StartUp Value......................... - auto CPU VID Control............................... - 1.425 CPU VID Special Control....................... - 104% LDT Voltage Control........................... - 1.30v Chip Set Voltage Control...................... - 1.60v DRAM Voltage Control.......................... - 2.90v[/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 200=RAM/FSB:1/1 Command Per Clock (CPC)....................... - Enable CAS Latency Control (Tcl)..................... - 2.5 RAS# to CAS# delay (Trcd)..................... - 4 Min RAS# active time (Tras)................... - 8 Row precharge time (Trp)...................... - 3 Row Cycle time (Trc).......................... - 8 Bus Clocks Row refresh cyc time (Trfc)................... - 14 Bus Clocks Row to Row delay (Trrd)....................... - 02 Bus Clocks Write recovery time (Twr)..................... - 02 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3120 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - normal level 4 DRAM Data Drive Strength...................... - level 2 Max Async Latency............................. - 10ns DRAM Response Time............................ - Fast Read Preamble Time............................ - 7ns IdleCycle Limit............................... - 256 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16 x Bypass Max.................................... - 07 x 32 Byte Granularity........................... - Disable(4 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: 3dMark2003 + Everest: 3dMark2005: 3dMark 2006: ========== short description: air cooled with xp-90/vc-re cooled chipset 300x10 @ 3000Mhz, 1.425+104% cpu voltages 300fsb @ 2.5-4-8-3 @ 2.90v vdimm
  23. Finally got the tccd sticks I picked up stable at 300 1:1 will have an ocdb entry up here in a little while. Thanks for the advice Oldguy 2.9 helped and a couple other setting's tweaked.
  24. Just got home to find prime still running 300 1:1 will have an ocdb entry up in just a couple. This ram is a little funky but took less than a week to get up 300 with it. OCDB 300 1:1 A little looser timing's then I was hoping for but not bad for pc4000. Thank you again for the advice Oldguy very much appreciated. Updated my ocdb entry with the tccd, got it to run a little better timing's but can't seem to get mal or rp lower without prime failing.
  25. Well here's a pretty crappy pic of my setup. Normally my cable management is a little better but just put the power supply back in a couple hours ago after playin around with the expert. I really need to do some more modding to that case but it sure was cheap. Modded my side window with two 92mm panaflow fan's one blowin right on the xp 90 and the other pulling hot air away from the video card.
×
×
  • Create New...