Jump to content

jkkeeton

Members
  • Content Count

    50
  • Joined

  • Last visited

About jkkeeton

  • Rank
    New Member
  1. did you try it with the same bios that makes a big diff. Well they told me only DDR333 but i got lucky mine must have a good controller or somthing cuz it came out stable just like it was with a gig. just had to disable that CPC and that was it i got lucky.
  2. for the people who are thinking about getting 2 gigs for BF2 it makes then game run perfect no lagg. Big diff in the game.
  3. i rma mine back to newegg after it would not overclock at all. get OCZ pc 4000 VX gold edition
  4. Genie BIOS Settings: FSB Bus Frequency - 240 LDT/FSB Frequency Ration - Auto CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.500v CPU VID Control - 1.300v CPU VID Special Control - Above VID * 126% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.20v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Disable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 2 Max Async Latency - Auto Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts)
  5. Genie BIOS Settings: FSB Bus Frequency - 240 LDT/FSB Frequency Ration - Auto CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.500v CPU VID Control - 1.300v CPU VID Special Control - Above VID * 126% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.20v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Disable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 2 Max Async Latency - Auto Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts)
  6. This is the best overclocking that i have done. Iv got 4x512 ram to all overclock the same as 2x512 the only thing i changed was Disabled the CPC. 14hours prime95 stable no errors sweet. Genie BIOS Settings: FSB Bus Frequency - 240 LDT/FSB Frequency Ration - Auto CPU/FSB Frequency Ratio - 10 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - 1.500v CPU VID Control - 1.300v CPU VID Special Control - Above VID * 126% LDT Voltage Control - 1.20v Chip Set Voltage Control - 1.50v DRAM Voltage Control - 3.20v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Disable CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 07 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - Auto Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 8 DRAM Data Drive Strength - Level 2 Max Async Latency - Auto Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts
  7. is this possible im running 4x512 with my winchester at ddr480 2T timming 2-2-2-6 @ 3.2v my computer wouldnt start up before then i disabled the CPC and then bam i got this crazy overclock to work the first time i just need to make sure its stable.
  8. ok i want to run my FSB at 240 2.4ghz and i need to run my ram at ddr333 cuz im using 4x512 with this winchester i dont know what the multiplier should be set to? I need some help
  9. ok i want to set the FSB at 240 2.4ghz ok so to make the ram run at ddr333 what do i need to set the dividers at? i dont know how to manualy get it to 333 never had to do that yet.
  10. i just had it overclocked but it was runnging at like ddr250 how do i get it up with multiplier do i use for a 240 FSB 2.4 ghz overclock with the ram at ddr333
  11. Ok i was running 2x512 ocz pc4000 VX at a overclock of 2.4 ghz and the ram at 2-2-2-6 it was stable as could be Runnnig at 1T timing. Ok plz help me i tried to just put the new ram in and start and computer wouldnt start with 4x512. I see that the ram now runs at 2T is that right? If you have 4x512 and the same ram can you help me overclock plz i dont know how to overclock 4 slots yet.
  12. i have a panflow over my XP90 and its pluged into my 3 pin cpu on the motherboard.Why is it not reading the rpms anyone els having this problem.And yes the fan is working keeping my cpu at 31c at2.5
×
×
  • Create New...