Jump to content

Drunky

Members
  • Content count

    42
  • Joined

  • Last visited

About Drunky

  • Rank
    New Member
  1. Drunky

    LED 4 Lit

    Just 1 stick of PC2100?
  2. Drunky

    LED 4 Lit

    This is the CPU that I am using: Features/Specifications: * AMD Athlon XP Barton 3000+ (2.167GHz) Socket A Processor * Model 10 Athlon (Barton) * OPGA Package Type (462-pin Socket A) * Max Front Side Bus of 333MHz * 512KB L2 Cache * QuantiSpeed architecture * 1.65v operating voltage ____Update: I will try out that sequence and report back. I might actually try that for my Ultra B, since not even a hot flash with a new BIOS fix did resolve the 4 leds of death. But as far as this board goes. I will try those 2 solutions and see. Thanks again for the help As always, DFI-Street has given me something to work with, and I appreciate that. You guys are alot more helpful then other forums.
  3. Drunky

    LED 4 Lit

    I didn't try that insert key trick. I will try it tonight, is there anything I should do in the BIOS if it boots all the way? The voltage should be fine, I have a decent PSU, or at least it was when I researched and bought it. But as far as the multiplier I am not sure what the setting is, can I set that by jumpers or in the BIOS? I am pretty sure the CPU is ok, I will try to reseat it andor put it in my other system, and report back. Thanks for the advice. I will be trying that and anymore that anyone posts. Thanks:)
  4. Drunky

    LED 4 Lit

    Oh and BTW nice job on the site upgrade!!
  5. Ok so I am back! I just got this board and hooked up my PSU, CPU, Heatsink, and Memory. The fans spin and the LEDs Flash then all is off execpt for LED 4. The manual says CMOS and battery check. But I have replaced the battery and reset the CMOS, still nogo. I dont know what else to try. Can someone please help? Thanks.
  6. Drunky

    NO Boot--4 LEDs

    Alright guys I got my BIOS Chip in and put it in........and no worky worky unfortunaly! So I am not exactly sure what to do next!!!! I really just would like to get another board but no one sells them any more!! Can someone PM me a addy for someone at DFI that might be able to help me figure out how I can get this issue resolved! THanks guys for all the help and advice!!
  7. Drunky

    NO Boot--4 LEDs

    I see thats cool I will contact DFI. I wasnt able to send a email to that dood but it got kicked back if someone could PM the addy to someone that can help me at DFI!! Thanks!
  8. Drunky

    NO Boot--4 LEDs

    Thanks Clay if I come across some pc2100 at work I will save it for myslef!! As far as the chip goes whoever can get it to me the quickest will be fine so I will email Tmod and DFI!! Thanks man!
  9. Drunky

    NO Boot--4 LEDs

    nm I just ordered on at biosmedic.com! Thanks for all the help guys!
  10. Drunky

    NO Boot--4 LEDs

    U know where I can get a new one? Im not sure how to hotswap so Ill just get a new one but I just dont know where from!
  11. Drunky

    NO Boot--4 LEDs

    So then we can totally conclude that I need a new BIOS chip? I will email them to get a new one at cost or no cost, I would like to know if you guys think that it will fix it!! I wait for opinon!
  12. Drunky

    NO Boot--4 LEDs

    I dont have a stick of 2100 thats like 200mhz right? U think its worth buying a stick? I will if it will work? How much of pc2100 should I get?
  13. Drunky

    NO Boot--4 LEDs

    Ok I removed the BIOS chip and then placed it back in and still nogo!! Is there anything else I can do!
  14. Drunky

    NO Boot--4 LEDs

    Yer man this has been a long issue for me! I tried the really long Clear and it still didnt work so I will remove the chip later this morn and report back! Thanks for all the help and the link as well!
  15. Drunky

    NO Boot--4 LEDs

    SO I should just disconnect the PSU and unplug all devices and pull the CMOS battery out and then pull the BIOS Chip itself?
×