Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by neverman

  1. going to give it a try and see what happens thanks
  2. drivers changed out with the latest off the net never did a bois reset as it seems to boot alright,all the debug lites go off as soon as i hit the windows screen
  3. To start off like to say my system runs like a charm,my problem is with my kid's system which is the same as mine except for his card which is an evga 7800 gtx,and his cpu is a 3200,he had updated his bois(don't know why) and tried to overclock it,burnt out his set of memory cause it won't even run on mine,operating system pooched,so this is what i did 1.gave him some memory same as mine 2.fresh install of windows using 1 stick-installed perfect 3.reflashed bois back to the original 4.setup his bois and installed other stick problem 1.hard drive takes for ever-goes to the window screen takes about 40 secs for the drive to start spinning 2.once into the operating system,it just sits there agian for about 40 sec before it loads anything 3.internet don't work-have gone into command prompt and with ipconfig can ping the computer but not out as i know the host address I've taken his hd installed it on mine,works like a charm,so i know it's not a software issue and his hd is good,boots so fast can't see the welcome screen, I don't think it's the bois as it boots to windows ok,after that she's down hill,memory good so i'm thinking board(memory controller poched) or cpu,sorry for being so long winded but this starting to be a pain and i almost forgot memory will only work with 2 sticks in the orange slots,put to in the yellow get a boot up error and only will show 1 thanks
  4. i have the same ram @ 2.5-3-2-5,it will not run @ 2-3-2-5,won't even boot,but otherwise no errors and system runs great
  5. Here's my problem,first was realizing that my board didn't come with any external com or printer ports,so i bought a Vantec docking station which gave me my com and printer ports(could never get the printer port to setup)so my real prob is when I use the com port to do certian things like programing cards, half way through i get the bsod,with the error of memory placement is wrong,I,ve run memtest for about 4 hours no errors,so i'm guessing this has to do with the usb to com port setup,tried setting it up on different coms no go,use it on my laptop works perfect,could this be an xp thing or this just won't work with my setup
  6. well must had a brain fart,did a little more research and found out didn't have any jumpers on 9&10 or 5&6 nstalled the jumpers and she work like a charm thanks
  7. I'm Having the same problems,tried JeB's idea still no sound,thinking maybe i'll just go out and buy a sound card
  8. Thanks for the quick reply,i'll drop my voltage on my cpu thanks agian,great forum,love it since my ut250 days
  9. It's been awhile,trying to get back into it,just put my system together,and following RGone settings,wasn't quite sure on the cpu voltage for a 4400+,it's at 1.52 right now and my LDT bus is in the red at 1.37 and my default multiplier is 11 just wondering if it sounds right before i start uping my hit thanks
  • Create New...