Jump to content

pharmd24

Members
  • Content Count

    137
  • Joined

  • Last visited

Everything posted by pharmd24

  1. Evil_inc, Will be waiting for your post...... Just took like an hour to read though this thread and your latest work is extra kewl! We need to get you something to put in your sig too
  2. michaelzhao: Thank kind of post is handy in a pm, but a thread crap when posted in the tread. ToHighOC: Pics alwasy help, and refs are always good. Check the stickies and you may sell this much faster.
  3. Has anyone seen where they are working on the drivers then?
  4. I swaped my ram to Ballistix and my MB/CPU seem much happier! I'm running 2.5ghz on stock volts (144 opty from monach for 130$). That is 20+ hours prime stable at 49c. I'm very pleased. My rig is in a cube case and runs nice a quiet...
  5. I had to up both chipset voltages by 0.1 to get to 300. My vid card my be my game instabilty issues.... I have an entry in the oc data base for my board at 300x9.
  6. Looks good... How well do they perform? as good, better, or like, freekin' awwsumm?
  7. What joe said. Single sata or pata does great and everything works. Ubuntu or kubuntu 64 or 32 bit should work great.
  8. With further testing... I don't think this board likes my Mushkin TCCD. I can prime 9+h and pass the oc database requirements but, I get the BSOD in games. I also can not get it to pass OCCT for over 8h at stock speeds with this memory. I Have some ballistix in now primeing. Its been going since last night and was still chuggin' away this morning when I left. I have my fingers crossed.
  9. I believe the new 3/21 bios has an option under intergrated periferals for lan boot. I got a version of the 3/21 bios from Tony that has the lan boot turned off by default. For previous ver. of the bios I believe if you hit shift+f10 at boot, a screen for configuring the lan boot will come up and you can turn it off there. What kind of chips are those g-skill? If you get a chance, pls post your mem settings. I still have not been able to get this board as stable as I would like....
  10. I have had some limited sucess since my first post in this thread. The TCCD memory I have likes at least 2.8v on this board, and 2.9 to overclock. I also over looked loading the optimized defaults after I cleard the CMOS. I have an entry in the OC database with is mb, and I inclueded all bios settings. I must give credit to Grayskull for some of my settings. I found his post at Xtreme to be most helpful in getting a clue on what some of the settings are on an ati chipset. Thanks for the replies and I hope this helps someone. I still feel :drool: for not loading the optimized defaults...... Always the little things.
  11. DFI RS482 INFINITY (3/21/2006 BIOS) AMD Opteron 144 Venus 1MB L2 2x512MB PC3200 Mushkin LVL2 V2 (TCCD) ATI x850XT PE 256mb, 540/590 6.3 drivers 250GB Seagate SATA hdd NEC 3500A Silver IDE DVD-RW Drive Antec TRUEPOWERII TPII-550 550W Power Supply ========== [b]Genie BIOS Setting:[/b] [color=red] DLL Speed Override............................ - Auto DLL Speed..................................... - High CPU/FSB Ratio Setting......................... - x9 CPU'n'NB Bus Ratio SEtting.................... - x3 600 MHz CPU Clock Setting............................. - 300 O.C. Failed Control........................... - Disabled DRAM Clock Setting............................ - 6/5 PCIE Clock Setting............................ - 100MHz CPU Voltage Setting........................... - 1.475v DRAM Voltage Setting.......................... - 2.9v NB and HT Voltage Setting..................... - 1.3v NB-SB Link Voltage Setting.................... - 1.9v Auto Detect PCI Clk........................... - Enabled Spread Spectrum............................... - Disabled [/color] [b]DRAM timing and Config:[/b] [color=red] CAS latency(tCL).............................. - 2.5 Min RAS active time(tRAS)..................... - 8T RAS to CAS delay(tRCD)........................ - 3T Row precharge Time(tRP)....................... - 3T Row to Row delay(tRRD)........................ - 2T Row Cycle time(tRC)........................... - 10T Row refresh CYC Time(tRFC).................... - 24T Read to Write time(tRWT)...................... - 2T Refresh Rate(tREF)............................ - 1560 Cycles Write to Read Delay(tWTR)..................... - 2 Bus Clocks Write recovery Time tWR)...................... - 2 Bus Clocks 1T/2T Memory Timing........................... - 1T Read Preamble value........................... - 5.5ns Async Latency value........................... - 7ns DRAM Drive Strength........................... - Weak Dram Drive Strength Ratio..................... - x1.28 DRAM DQ Drive Strength........................ - 50 % DQS Hysteresis................................ - Disabled Read and Write Queue Bypass................... - Auto Dynamic Idle Cycle Counter.................... - Enabled Idle Cycle Limit.............................. - 16 Cycles Bypass Max.................................... - 4 Times Odd Divisor Correct........................... - Disabled Dual DIMM..................................... - Auto Disable Jitter................................ - Auto DRAM Bank Interleave.......................... - Enabled Burst Length.................................. - 8 beats Enable AllDIMM slots clock.................... - Enabled MTRR mapping mode............................. - Continuous PDL Delay Adjust.............................. - Auto [/color] [b]System Bus Configuration:[/b] [color=red] HT Link Configuration......................... - Enabled Upstream LDT Bus Width........................ - 16 bit Downstream LDT Bus Width...................... - 16 bit [/color] ========== Prime95 + 3dMark2001SE + CPU-Z 1.33: http://img.photobucket.com/albums/v318/pharmd24/DFI/2.jpg 3dMark2003: 3dMark2005: EverestMemory Read: http://img.photobucket.com/albums/v318/pha...I/everestMR.jpg ========== short description: 300x9 @ 2700Mhz, 1.475v 2.5-3-8-3 @ 2.9v vdimm
  12. Looks good to me! My OCZ it the older TCCD stuff... I have my Mushkin TCCD week 437 in now (no heatspreaders ) in the blue slots. I loaded the Optimized defaults and truned off the serial(not the sata ports) and irda ports, and gave it 2.7 vdimm. Primeing now on my end. Very interested in your results. Thanks a bunch for checking this out!
  13. I ask this b/c I have tried 2 optys, and two sets of TCCD ram. I can not get any of the three programs listed to run. OCCT Fails at 7 min in, Prime95 will run up to 1.5 hours but no more, and sp2004 appears to run but the cpu temp never goes up and the test does not advance. I was trying to OC but with prime failing I went back to stock and still no luck! RS482 bios 1/25 and 3/21 (have tried with both) Opteron 146 (stable at 2.9ghz 24/7 prime95 over 24 hours @ 1.456vcore in Ultra-D) and Opteron 144 (stable at 2.7ghz 1.45vcore - prime95 12+hours in Ultra-D) OCZ Plat rev2 TCCD & Mushkin lvl2 v2 TCCD Antec TPII 550 PSU Seagate 160gb SATA NEC 3500 dvd burner I have only tried the Black mem slots so far. We are talking stock speeds and volts! Any input is apprecated. I'm the goin' nuts here...
  14. Bump for a great chip. This is a steal! I have one of the same stepping that does 2.9ghz 24/7 at 1.46 vcore
  15. 2006/03/21 File 82DMD321.exe Size 0 bytes Description DiamondFlash Image for BIOS. Please Click Here if you are not familiar with the procedure of Diamond Flash Image!! Major Reasons of Change: 1.FIX DDR compatibility perblem with REV.E3 CPU. 2. Remove Onboard VGA not share memory function Item. 3.Add new CPU (ADA3000AKK4BX , OSA256FAA5BL and OSA856FAA5BM) cool"n"quiet table. 4. fix some voltage be hidden if use Opteron cpu. 5. fixed resume from S3 CPU temp offset issue. 6. Fixed VBAT Detect error when S3 resume. I'll be seting up one of these tomorrow... with an Opteron. It would be nice to have this bios from the start.
  16. final price reduction for combo - 72 shipped
  17. Combo price: 72 shipped I'll through in a SB live card, and I found a HS that came with a retail 1700+ (but it will need a fan) I just upgraded my kids computer. So we have.... I will ship to the lower 48 US states only. I will take paypal among other forms of payment, and of course I'll make some one a sweet deal if they want it all.... Trades: Don't like a price - Please PM with offers. Heatware Sold: *to doctorcarta on pcper* Thermalright SLK-900a: This comes with the fanclips for 92mm fan (I think I have the others and the box but, I'll have to make a trip to the attic to make sure). 23$ shipped. *to Bob21* Mushkin pc3500 ddr 2x256mb lvl 2 ram (BH5). This stuff has silver heatspreaders. I have never tinkered with them to void the warrenty. I have had them up to 240mhz at 2-2-2 but, they have been runing at 2.8 vdimm at 200 2-2-2 for the past year. 55$ shipped
  18. Long story - short: I had to RMA the boad and now all is right. I have a 146 opteron running dual channel at 2.9ghz and a 166 ram divider. I must say that DFI did the rma faster than any company I have ever delt with.
×
×
  • Create New...