Jump to content

malinois1

Members
  • Content Count

    442
  • Joined

  • Last visited

Everything posted by malinois1

  1. No problems post bacl if you need more help
  2. http://www.newegg.com/Product/Product.asp?...N82E16817103937
  3. Try these for OCZ 200 enable 2.0 02 06 02 07 16 or 14 03 or 02 03 02 or 01 03 or 02 0648, 2560 or 3120 (0648 has worked on many systems) auto enabled auto 0 level 8 level 2 7.0 auto 256 disable 16 07 disable In Genie Bios 200 (start here and work your way up) 16 16 7 (for testing, then adjust for max overclock) 100 disable 1.500v 1.300v (This is about 1.57v, if you need more do not go past 1.45v here, use more the 123% below, there is a reason ) above VID * 123% 1.30v 1.70v 3.3v-3.4v
  4. Yes 15A is not enough for an a64 system
  5. That PSU only has 15A on the 12V rail.....you need at least 26A
  6. Also what video card? Do you have the pci-e power connected?
  7. Try these settings 200 enable 2.0 02 06 02 07 16 or 14 03 or 02 03 02 or 01 03 or 02 0648, 2560 or 3120 (0648 has worked on many systems) auto enabled auto 0 level 8 level 2 7.0 auto 256 disable 16 07 disable In Genie Bios 240 (start at 230mhz and work up) auto 16 16 7 (for testing, then adjust for max overclock) 100 disable 1.500v 1.300v (This is about 1.57v, if you need more do not go past 1.45v here, use more the 123% below, there is a reason ) above VID * 123% 1.30v 1.70v 3.3v-3.4v
  8. Ahhh thanks missed that part . That is not an official bios it is a beta bios
  9. I would also like to know it the official is different from say the 510-3 which I am using
  10. Hi CB. I did have that problem once also but it id when I moved from an Nvidia to ATI card. I would suggest a clean install it worked for me :nod:
  11. Look at this search of thast exe http://search.yahoo.com/search?p=what+is+n...ggle=1&ei=UTF-8
  12. Yes you have to use the tool on Hitachi website.
  13. This one? http://www.dfi-street.com/forum/showthread.php?t=10195
  14. Where did you hear that? This is mine http://www.dfi-street.com/forum/showpost.p...17&postcount=15 and it does appear to top out at 2.5 with reasonable Vcore. I did get 2.6 stable with 1.65Vcore but didn't think it was worth is so I moved back down. 2.5 is rock stable though
  15. 1. I did exactly the same thing since I need to update bios and add the raid drivers and it worked fine. I believe the FD connector is mostly for SLI setups. 2. Nope only have to hook op Sata or Molex either or
  16. Yes TCCD and TCC5 will work very nicely and doesnt need high volts.
  17. You need to get the feature tool here http://www.hitachigst.com/hdd/support/download.htm and change the properties of that HDD to SataII
  18. YEs that looks fine. The PSU is AOK. The ram will work but I would sell it and get some OCZ 3200PE Rev2
  19. DFI LANPARTY nF4 SLI-D 5/10/2005 BIOS AMD Athlon 64 3200+ Venice Socket 939 Processor Model ADA3200BPBOX - LBBLE 0518 stepping 2x512MB OCZ EL Platinum Revision 2 eVGA 256-P2-N376-AX Geforce 6800GT 256MB 256-bit GDDR3 PCI-Express x16 Video Card , 7.1.2.5 drivers - 409/1100 2x HITACHI Deskstar 7K80 HDS728080PLA380 -0A30356 80GB 7200 RPM 8MB Cache Serial ATA II Hard Drive (RAID-0) PCP&Cooling Turbo-Cool 510 Express / SLI THERMALTAKE CL-P0114 120mm Cooling Fan/Heatsink (Big Typhoon * * * * ========== Genie BIOS Settings: FSB Bus Frequency - 278 LDT/FSB Frequency Ration - 3 CPU/FSB Frequency Ratio - 16 16 PCI eXpress Frequency - 100Mhz CPU VID StartUp Value - StartUp CPU VID Control - 1.300v CPU VID Special Control - Avove VID * 126% LDT Voltage Control - 1.30v Chip Set Voltage Control - 1.70v DRAM Voltage Control - 2.8v DRAM Configuration Settings: DRAM Frequency Set - 200 (DRAM/FSB:1/01) Command Per Clock (CPC) - Enable CAS Latency Control (Tcl) - 2.5 RAS# to CAS# delay (Trcd) - 04 Bus Clocks Min RAS# active time (Tras) - 08 Bus Clocks Row precharge time (Trp) - 03 Bus Clocks Row Cycle time (Trc) - 08 Bus Clocks Row refresh cyc time (Trfc) - 16 Bus Clocks Row to Row delay (Trrd) - 03 Bus Clocks Write recovery time (Twr) - 03 Bus Clocks Write to Read delay (Twtr) - 02 Bus Clocks Read to Write delay (Trwt) - 03 Bus Clocks Refresh Period (Tref) - 4708 Cycles Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - Level 7 DRAM Data Drive Strength - Level 2 Max Async Latency - 7.0 Read Preamble Time - Auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ========== Prime95 + 3dMark2001SE + CPU-Z 1.29 : http://i11.photobucket.com/albums/a161/mal.../OCDBstable.jpg 3dMark2003: 3dMark2005: Aquamark 3d: Everest Read: ========== short description: 278 X 9 @ 2502 Mhz, 1.3v + 126% 2.5-4-8-3 @ 2.8v vdimm
×
×
  • Create New...