Jump to content

malinois1

Members
  • Content Count

    442
  • Joined

  • Last visited

Everything posted by malinois1

  1. Hi Hepath, Have you tried OCZ support forums? Go to www.bleedinedge.com then go to the ocz support section. Also this page has some settings from the folks at OCZ that may help http://www.bleedinedge.com/forum/showthread.php?t=9833
  2. OK and is a capacitor a conductor or an insulator? :shake: Have you tested that personally with a mulimeter? Where did you get this info or come to this conclusion. Never the less people have burned cpu's and mobos, and vid card by getting on the electronics. So I go back to my first question.... bottom line is it will fry your electronics due to electrical charges if let on electronics
  3. Well it depends a little on what kind of paste you were using as some is conductive some is not. If it is AS5 yes it is very conductive. Either way I would clean it very well and carefully just to be safe.
  4. Nope no problem there. The second round of test is srictly cpu limited. You can OC untill your hearts content and will not get much more on that portion of the test
  5. Pure rubbish My Ultra-D clocks just as well as my friend SLI-dr that I built for him. His has a few more things in the bundle and 4 mors sata ports but other than that the performance is the same.
  6. Just looked at some bios screenie of the dram config at legitreviews and it appears that have some good tweaks there just not quite as much as with the lanparty. Quote from legitreviews:
  7. Nope no need for a hacked bios since the bios for the Lanparty series NF4-D, ultra-d,sli-d and sli-dr are all the same. In fact they all have the NF4 SLI chipset just the jumpers disabled on the chipset There are no bios feature to turn on SLI. You will however have to move the 6 jumpers between the pci-e slots though but you have to do that with the sli board also. It is just as easy as connecting the 2 solder joints...that is all you have to do. In fact if you found (Thundas or Exroadie I forget ) post on how to mod them you could save a few more dollars by going with this board http://www.newegg.com/Product/Product.asp?...N82E16813136159 The only difference between this NF4-d and the NF4 Ultra-d is the NF4-d doesnt have sataII which can be modded just as easily
  8. SLI Bridge at newegg http://www.newegg.com/Product/Product.asp?...N82E16814998001 I will look at the feature differnce also and chime back in. I think more importantly that the ultra d has a better bios. IMHO the ulta D is the best bang for the buck out there. I will try to pull up a link to the mod for you also
  9. SLI Bridge at newegg http://www.newegg.com/Product/Product.asp?...N82E16814998001 I will look at the feature differnce also and chime back in. I think more importantly that the ultra d has a better bios. IMHO the ulta D is the best bang for the buck out there. I will try to pull up a link to the mod for you also
  10. Personally If you want to save money go with the Lanparty UT NF4 Ultra D. It can be modded to SLI so easy with just a little conductive paint no soldering required. It has more adjustments and voltage tweaks from what I understand. I do use my Ultra D in sig to SLI from time to time on benches. Just pull another 6800GT from my other rig .
  11. Making Love The Italian says, "When I've a finished a making da love withah my wifah, I go downa and gently tickle the back of her knees, she floats 6 inches above a da bed in ecstacy." The Frenchman replies. zat is noting, when Ah've finished making ze love with ze wife, Ah kiss all ze way down her body, and zen Ah lick za soles of her feet wiz mah tongue, and she floats 12 inches above ze bed in pure ecstasy." The redneck says, "That aint .. When I've finished porkin the ole lady, I git out of bed, walk over to the winder and wipe my weener on the curtains. She hits the freakin' ceiling
  12. LOL @ Ace. I have seen a pic of you already so I know the Avatar isn't really you . I was more interested in the gun in the pic though :nod:
  13. That is because in reality my 1000 is supposed to be multiplied by 2....I am trying to keep it simple . If you don't believe me try 250 plus with a 5 multi on HTT and see how windows fares
  14. Here you go download this and make a new raid floppy http://us.dfi.com.tw/Upload/Driver/NFORCE_R.exe
  15. Cool glad you are moving forward. Let us know how it turns out
  16. What voltage are you giving the ram? Try 2.8 and see what happens.
  17. Hmmmm I didn't realize you just wanted this for a backup drive. You still would have to go into the F10 screen as per the tuturial and build the array though. Other than that I am not sure as I have not tried that. Everyone I know has raid on the main boot drive.
  18. Well if you just cleared cmos as you stated earlier "Defaults Loaded" is normal. Now press del to enter bios...then load optimum defaults then press F10 Also you will need to flash the bios to 623 to support that cpu...
  19. Ummmm you have to install the drivers at a fresh install.....you cant just decide after original install...hey I think going raid would be cool.....It will not work!!
  20. Ummmm I know this is not the problem but you may want to lower the HTT before you corrupt your install. HTT multi X CPU frequency cant be greater than 1000
  21. Yes it should still see the processor as a single core
  22. It is probabaly that the raam and this mobo doesn't jive . She is a bit picky about ram.
  23. Use this to make your raid floppy http://us.dfi.com.tw/Upload/Driver/NFORCE_R.exe
×
×
  • Create New...