Jump to content

ocingmaddog

Members
  • Content Count

    34
  • Joined

  • Last visited

Everything posted by ocingmaddog

  1. Well looking on OCZ's website...the only place to buy these sticks are at atacom.com. http://www.atacom.com/program/print_html_n...MEDD_OCZT_AG_F2 They're 289 with about 4-5 bucks for shipping. ATACOM Resllerratings As you can see, they don't have a very good rating. It's your decision...
  2. lol... u didn't look long enough:D. http://www.newegg.com/app/ViewProductDesc....-146-890&depa=0 This is what your looking for. They may not come back in stock:(. Just cross your fingers and hope so. Have you tried looking elsewhere?
  3. His sticks are not BH-5. The V2's are the Samsung TCCD chips. TCCD chips can run at very high FSB's and frequency's without the extra voltage, like BH-5 needs. As for timings, according to the test over at Andantech, they achieved DDR500 with timings of 2.5-3-4-7 with 2.85 volts. I would try those timings with 2.9 volts and you should be set. EDIT: I just looked at yur sig, chinkgai, and you have the same sticks...wow
  4. I think you should try turning CPC off. That may help. If not, look at this thread: www.dfi-street.com/forum/sho...=&threadid=4405
  5. I just wanted to know what my timings should be. They're all set to Auto right now, except for 5-2-2-2 my regular timings. I know different ones work for different people but what seems to be the best?
  6. OMFG!! I just ran it at 1.85Vcore with 3.0Vdimm and it ran through nature, when it was going back to the desktop to show the score, the computer restarted!
  7. I don't think it should be a concern. Just make sure it doesn't go over 55C.
  8. What's LDT? EDIT: Just found out that LDT is for A64's only. Any other ideas?
  9. Well it's kind of weird now. I tried running it at 230x10 with 1.825Vcore and 3.0Vdimm. Now about nature I think, the screen goes into standby and the 4th DLED comes and and I hear a single short beep. Any ideas?
  10. Well I have everything up to 230 stable. But 230 will not work. I try benching it at 230x10 with 1.85Vcore, 2.9Vdimm, and 1.7Vdd. Whenever I try to run it at that it says one of the files in 3dMark is corrupt. This goes away at lower speeds so it's not the program. Any ideas?
  11. Plz guys. I really need help. This problem is really buggin me!
  12. This is very weird. I ran my computer at 220x8 w/ 1.725Vcore, 2.8Vdimm wit 1:1 on 3dMark and it was stable. Then I tried playing some Counter-Strike. Well I noticed that maybe every 10 seconds or so I would have HUGE lag spikes. So I quit the game and tried the internet. It was very SLOW and DL's would come in and out. So is this OC'ing related and if so how can I fix it? Thank you.
  13. lol. Sorry bout the sig will update here in a sec. I do have an ATI 9800np. So 1.7volts to it would be okay?
  14. Well right now I'm at 230x8 stable. Now 3dmark doesn't freeze at 235x8 it crashes to desktop at Gothic (High Detail). I guess I should try more Vcore?
  15. Well what do you recommend for better cooling? VGA Silencer 4 with some TweakMaster RAMsinks? I have a Zalman NB cooler but it's not installed yet. Should I buy a NB-1 from Thermalright? Anything else I should do? EDIT: Case vs. Power supply? Lian Li PC65 vs. Ultra X-COnnect PSU? Which one would help my airflow?
  16. And setting my AGP Volts to 1.7 won't damage anything? lol just curious. May have seen my thread on best BIOS to use, Hellfire's 3EG Rev. 3? Also how to do it, i.e. Winflash vs. Floppy flashing?
  17. Im sorry I'm a wimp, lol. Well thx guys. I have gotten up to 235x8 so far. But 3dMark2001SE freezes on 235x8 on the Car Test. So increase of Vcore?
  18. lol. It's a t-bred b. AIUHB DUT3C 0302 MPMW. I'm not sure if the RAM will get too hot. I don't have very good cooling in my case. So talk to me. What should I do? Put the RAM to 3.3? And do your burn-in if I get stuck? How do you do that BTW? lol. Thanks guys.
  19. I've been looking through the BIOS and I can't decide which one to get. I have a LanParty Ultra B with the 6/19 BIOS atm. What BIOS do you guys recommend for me to use? And how to do it (Winflash vs. Floppy disk flashing)?
  20. Okay it seems like I can play computer games for hours on end at 205x8 with a Vdimm of 3.0. What should I do now?
  21. Okay I'll try that thanks. I'll report back if it does or doesn't.
  22. I have gotten to 215x11 before. I had to revert to 190x11 beacuse my internet was acting all funky. Now when I try and go back to just...200x11, and play, let's say Doom 3, the computer just shuts off completely. I have an SP-97 with SFII on it and it doesn't get that hot. I have my Vdimm at 2.8 and Vcore at 1.825. Any ideas?
  23. Yeah it's only one 512 stick. What do you consider high fsb? 200 and higher? I'll try higher Vdimm. Thanks for the help. Any thing else guys?
  24. It's really weird. I have gotten up to 215x11 and now I can't get past 200. I had 215x11 at 1.85Vcore. I have 1.85Vcore on 200 and it's not going anywhere. Vdimm's at 2.8. Anyone have an idea? If you have any questions feel free to ask. I'll probably know the answer. Thanks!
×
×
  • Create New...