Jump to content

G-Code

Members
  • Content count

    85
  • Joined

  • Last visited

About G-Code

  • Rank
    Member
  1. G-Code

    It's a Girl...!!

    Congrats. Being a parent is the greatest thing
  2. G-Code

    Street Bar & Grill

    No.... Does not even look like chicken. The meat is a dark red colour.
  3. G-Code

    Street Bar & Grill

    If you look around you can even find EMU, mainly at specialty restaurants thou.
  4. G-Code

    Street Bar & Grill

    Had some Kangaroo steaks the other night not too bad. You can get it at my local supermarket. Great talking point at a BBQ Bruce
  5. This article is in the latest PC Authority magazine. http://www.pcauthority.com.au/review.aspx?CIaRID=4732 Specifications 3.73GHz (over*clocked) Intel Core 2 Extreme QX6700 2GB OCZ PC2-8500 SLI RAM eVGA Nforce 680i motherboard 2 x 74GB WD Raptors (RAID0) 500GB WD HDD; Pioneer DVR-112D 18x dual-layer DVD-RAM writer 2 x 768MB Nvidia GeForce 8800 GTX graphics Creative X-Fi XtremeMusic sound Windows Vista Ultimate 1yr onsite warranty Off the shelf overclocking if you have a lazy $AUD 7300 burning a hole in your pocket.
  6. G-Code

    What is your town famous for?

    Born in Bundaberg, Queensland, Australia. Home of the Famous Bundy Rum....
  7. G-Code

    Street Bar & Grill

    Hey I was in the US a few weeks ago I thought Coor's was not too bad. Can't beat OZ beer thou.
  8. Have you tried to overclock ur system? or do you suspect that these temps will stop you. I do not think that these temps would prevent you from getting some overclock. So if you are just focus Just on the temp you might be missing something else that is stopping you. I have found a couple of things with this board. You need to give the CPU atleast 1.45 V, you need to get all the settings for the ram in the bios right, Get the FSB/multiplyer combo right. I found you go from getting nothing at all tearing your hair out to what my overclock ceiling when do I stop this is great. Bruce
  9. G-Code

    Where to Shop Guide (Stores listed by country)

    In Australia www.scorptec.com.au DFI, OCZ, G Skill etc
  10. The best bios is the offical DFI 6/19. I have tried them all but alway returned to this one. Bruce
  11. These are my settings Memory Hole - Disabled Max Mem Clock - 200 Mem Timing - 1t Cas# Latency - 3 Ras# to Cas# delay - 3 Min Ras active time - 8 Row Pre charge - 2 Write Rec Rime - auto Ras# to Res# Delay - 2 bus clocks Row refresh time - 16 bus clocks Row cycle time - 8 bus clocks Write to read delay - 2 bus clocks Read to write delay - 3 bus clocks Refresh rate 3120 cycles Write cas latency - 7ns Read preamble - 4ns Dynamic indle cycle counter - 256 DDR output driving - normal DDR DQ drive strength - auto ECC Function - disable CPU Vid control - 1.45 volts CPU Volt adj - default Chipset volts - 1.65 volts Memory volts - 2.8 volts Hope this helps. My system is very stable Bruce
  12. G-Code

    Help me pick an AGP mobo.

    Get a 939 board. Gives you more CPU options especially dual core. I am happy with my Ultra-D, have not had even one problem. Bruce
  13. G-Code

    NF3 Ultra-D Problems

    Your could also try some GSkill PC4000 HV. They have performed well for me and could be abit cheaper than OCZ. I have some OCZ pc3200 TCCD ram as well that works very well, But I wanted to upgrade to 2 gig and these modules were much more competetively priced than the similar OCZ stuff and that swayed me to them. Been great ram so far. Bruce
×