Jump to content

!TIMMY!

Members
  • Content count

    9
  • Joined

  • Last visited

About !TIMMY!

  • Rank
    New Member
  1. !TIMMY!

    Please Help With My Overclock

    Cheers for the replies guys. I changed the divider and went back to a 9 x multi. I have it OCCT stable at 3.6ghz (400 x 9) with 1.35 vcore with special add on auto (about 1.38v according to OCCT), 1.405v NB and 2.10v RAM @ 1066 5-5-5-15 2T. I will try Prime as well to make sure it is stable. Maybe 450 x 8 just aint possible with my setup.
  2. !TIMMY!

    Please Help With My Overclock

    Cheers for the reply. My PSU kept my other Q6600 @ 3.3ghz with 1.4v, ram @ 1175mhz with 2.15v stable. And now I am using less voltage on both the cpu and ram. I believe that SilverPower are a subsidiary of Tagan so I would have thought it would be up to the challenge.
  3. I am trying to get my PC stable with my Q6600 @ 3.6 (450 x 8), and ram @ 1128mhz 5-5-5-15-2T. I bought this cpu 2nd hand because it can do 3.6ghz (450 x 8) @ 1.3375 vcore, 100.23% special add, vdroop: disabled; in a DFI X48 UT. I have had my ram at 1175mhz @ 5-5-5-15-2T before, but I have having problems getting them stable together. With the current settings below, it will last 1 minute on OCCT before the PC locks up. The max temperature any CPU core reached was 63C. My chipset temps are fine. The AS5 still need time to cure and my water cooling loop still needs to settle, so I think temps will reduce over time. My Specs: Mobo: DFI LP X48 LT T2R | Bios 08/29 | XSPC Delta Chipset CPU: Intel Q6600 G0 | Swiftech GTZ Ram: OCZ PC2-9200 4GB (2 x 2GB) Flex II GC: Asus 8800GT 512mb | Glacier Fan @ 700/1750/2000 SC: X-Fi Xtreme Gamer Fatal1ty Professional HD's: WD 150GB Raptor & 4 x 250GB WD SE16 (Raid 0) & Seagate 7200.11 1TB Optical Drives: 2 x NEC DVD Writers PSU: SilverPower 600w Case: NZXT Tempest Cooling: Custom Water Cooling OS: Windows XP Professional SP3 Bios Settings: CPU Feature - Thermal Management Control: Disabled - PPM(EIST) Mode: Disabled - Limit CPUID MaxVal: Disabled - CIE Function: Disabled - Execute Disable Bit: Disabled - Virtualization Technology: Disabled - Core Multi-Processing: Enabled Exist Setup Shutdown: Mode 2 Shutdown after AC Loss: Disabled CLOCK VC0 divider: AUTO CPU Clock Ratio Unlock CPU Clock Ratio: 8x - Target CPU Clock: 3600 CPU Clock: 450 Boot Up Clock: AUTO DRAM Speed: 266/667 - Target DRAM Speed: 1128 PCIE Clock: 100mhz PCIE Slot Config: 1X 1X CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled SATA Spread Spectrum: Disabled Voltage Settings CPU VID Control: 1.3375v CPU VID Special Add Limit: Enabled CPU VID Special Add: 100.23% DRAM Voltage Control: 2.12v SB Core/CPU PLL Voltage: 1.510v NB Core Voltage: 1.555v CPU VTT Voltage: 1.310v Vcore Droop Control: Disabled Clockgen Voltage Control: 3.45v GTL+ Buffers Strength: Strong Host Slew Rate: Weak GTL REF Voltage Control: Disable x CPU GTL1/3 REF Volt: 113 (Greyed Out) x CPU GTL 0/2 REF Volt: 100 (Greyed Out) x North Bridge GTL REF Volt: 100 (Greyed Out) DRAM Timing - Enhance Data transmitting: FAST - Enhance Addressing: FAST - T2 Dispatch: Auto Clock Setting Fine Delay DRAM CLK Driving Strength: Level 6 DRAM Data Driving Strength: Level 8 Ch1 DLL Default Skew Model: Model 0 Ch2 DLL Default Skew Model: Model 0 Fine Delay Step Degree: 5ps Ch1 Clock Crossing Setting: Auto - DIMM 1 Clock fine delay: Current - DIMM 2 Clock fine delay: Current - DIMM 1 Control fine delay: Current - DIMM 2 Control fine delay: Current - Ch 1 Command fine delay: Current Ch2 Clock Crossing Setting: Auto - DIMM 3 Clock fine delay: Current - DIMM 4 Clock fine delay: Current - DIMM 3 Control fine delay: Current - DIMM 4 Control fine delay: Current - Ch 2 Command fine delay: Current Ch1Ch2 CommonClock Setting: Auto Ch1 RDCAS GNT-Chip Delay: Auto Ch1 WRCAS GNT-Chip Delay: Auto Ch1 Command to CS Delay: Auto Ch2 RDCAS GNT-Chip Delay: Auto Ch2 WRCAS GNT-Chip Delay: Auto Ch2 Command to CS Delay: Auto CAS Latency Time (tCL): 5 RAS# to CAS# Delay (tRCD): 5 RAS# Precharge (tRP): 5 Precharge Delay (tRAS): 15 All Precharge to Act: 6 REF to ACT Delay (tRFC): 52 Performance LVL (Read Delay) (tRD): 7 Read delay phase adjust: Enter Ch1 Read delay phase (4~0) - Channel 1 Phase 0 Pull-In: AUTO (7) - Channel 1 Phase 1 Pull-In: AUTO (7) - Channel 1 Phase 2 Pull-In: AUTO (7) - Channel 1 Phase 3 Pull-In: AUTO (7) - Channel 1 Phase 4 Pull-In: AUTO (7) Ch2 Read delay phase (4~0) - Channel 2 Phase 0 Pull-In: Auto (7) - Channel 2 Phase 1 Pull-In: Auto (7) - Channel 2 Phase 2 Pull-In: Auto (7) - Channel 2 Phase 3 Pull-In: Auto (7) - Channel 2 Phase 4 Pull-In: Auto (7) MCH ODT Latency: 1 Write to PRE Delay (tWR): AUTO Rank Write to Read (tWTR): AUTO ACT to ACT Delay (tRRD): AUTO Read to Write Delay (tRDWR): AUTO Ranks Write to Write (tWRWR): AUTO Ranks Read to Read (tRDRD): AUTO Ranks Write to Read (tWRRD): AUTO Read CAS# Precharge (tRTP): AUTO ALL PRE to Refresh: AUTO These settings: DRAM CLK Driving Strength: Level 6 DRAM Data Driving Strength: Level 8 Ch1 DLL Default Skew Model: Model 0 Ch2 DLL Default Skew Model: Model 0 Fine Delay Step Degree: 5ps popped up when I updated the bios to 08/29 and I have no idea what to set them at (I never changed them) and how they effect the overclock. Please can you help, I would love to get my PC stable at these speeds!
  4. This does seem odd. My DFI NF4 SLI-DR won't work in DC with my Opty 146, but did with my 3700 and 3700 X2. I had the latest Bios as well.
  5. I am after a AMD Opteron 175 that will do 2.8GHz (255FSB) so I can keep it @ 1:1 with my ram which will do 255FSB. I will have it under a Arctic Cooler Freezer Pro so voltages will have to be under 1.55v @ 2.8GHz (255FSB). Can anyone help me out? Thanks in advance. P.S. I live in the UK.
  6. !TIMMY!

    Any 939 CPU

    Ok, I need any 939 CPU, the cheaper the better. Reason is I need to test weather it is my Opteron 146 that is stopping me running dual channel p.s. I live in the UK.
  7. !TIMMY!

    DFI NF4 SLI-DR Backplate / I/O Plate

    Im from the UK and ive checked ebay but no luck. Can i get in contact with DFI in the UK?
  8. Hello, I have the above motherboard, and i want the backplate as the person before me lost it. Does anyone know where i can get a spare one??? !TIMMY!
×