Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by Shadow334

  1. what software do i use to configure the screen for my computer.
  2. This can be done but i would not recomend it. Depending on how many watts the ps is(prolly not much cause of them being old). You would do this in parallel. do not series them. If you series them then you would not have the right amount of volts to your second mb. when you place them in parallel you will have the same amount of volts going to each mb. here is a diagram on what i am talking about psu.bmp
  3. WTH!! I did not post this. i have not even been logged on to O.C. for a long time. why it it doing this. i made a post about this like a year and a half ago but that was it. why is it reposting it now? dont worry bout posting any thing bout stealthing cause i know what it is.
  4. ok. my friend has a router in his room. "linksys 802.11G" and his mom as a comp in her room. i have been trying to get her to beable to connect to it but it can not get an ip address from the router. it is going through 4 walls but it has a "verygood" signle. whats the deal. i have tried everything i know to do so i am turning to u guys. Thanks in advance.
  5. ya i agree. i had a problem once where windows kept crashing at different stages. i was mad cause it was all new stuff. once i calmed down i started troubleshooting and all it was is my ide cable going to my hd was not all the way pluged in. so ya good to know you found your problem though.
  6. Yes the orac3 was an amazing mod. but as these may be completly useless they are nice mods.
  7. the plan looks great. and i would make it with the solid pannel to, because i like modding. i think it will work fine and look great if done correctly look forward to seeing the end results
  8. congrats to you. ive been away from occ for awhile and comming back, but when i left we needed more active members. hope you stick to your word. good work man.
  9. no it dont on the package. it is for gauge pods for my truck. i am using the jb weld to fill in all the cracks and then im going to paint it. this is net the jb weld brand but it cost just as much. it was all auto zone had in stock. but it will still prolly work ok right? but ya ill try it on something first after school tomaro. thanks
  10. i have used jb weld alot but have never tried to paint it. this aplication needs to be painted. can you pain over jb weld
  11. Shadow334


    i have a copy of windows vista beta and i could not get my video card to work. the problem is the drivers. i have it installed on my old dell 2350. i have looked for a driver but i have found and already knew it would not be easy since it is only beat. does anyone know were i could get so drivers that might work. it would be fine if i could get the res. below 640x480. and it has an intergraded video card. i have tried other cards, PCI but only one of them even give me a pictrue in windows. thanks in advance.
  12. Shadow334


    ya i got it now, thanks
  13. Shadow334


    my school is a member of msdn. and we all got copies of vista beta 2. my teach downloaded it and i saved it to a external hard drive cause i did not have a dvd burner. it is an *.iso file. i an trying to upgrade my box from xp to vista. this is not my main box. do i have to have an iso buster to run the setup from windows? if so were can i get a free one to use this one time? thanks in advance
  14. that is right thank you. any way i have been messing with it for about four hours now and i am still were i started. i can now get them both connected but when they are bridged it says i am connected to the wireless but i cant even ping the router at my aunts house. when i go to view the wierless connection and click on the support tab it shows nothing for the IP,sub or gateway. so now what do i do? can someone please help me?
  15. gateway. it is in the closes spot to my house. but i live in a brick house and so dose she. but this is not what i want to do. i have done said what i want to do. dont take this the wrong way but all i want to know is: why cant i connect to both wireless and wired at the same time? this is all i need to know right now. once i get this figured out then i will bridge the connections again and start from there. thanks in advance
  16. it is too far for cat6. i done tried. they do not make antennas for this router. and this is what i want to do. i have already bridged the connections. but when i enable my wired connection it disconects me from the wireless connection. what the heck is up why cant i be connected to both networks at the same time. from what i have read it is suposed to be easy to do but ya know how it is, nothing ever goes the way the tutorial says it will. but just why cant i connect to both networks at once?
  17. yes it is sp2. but i am using windows. will this matter?
  18. ok now everytime i enable the wired connection it disconects my wireless connection and i can not reconect until i disable the wired connection
  19. no but that is not why i want it on my other comps. my laptop is slow and my desktops are newly built. and a a card in my desktop, even in the back room will not pic up the signle. but back to my first question. is it posible to link themtwo together. i tyied a bridge in windows and then my net would not work at all.
  20. ok this is going to be hard to understand but go with me here. ok. my ant lives next door to me. she lives close enough to get dsl but i dont. so i set up a wireless network at her house. i use my laptop to get on it. but i have to be in the back room of my house(closes to her house). i have very good signle and full speed. is it posible to put my lap top on my wired lan and share the net on it through my lap top with the computers on my wired lan? if so how?
  21. I have one of those chicago rotary tools. Junk. all i can say is JUNK. Mine also had a bent shart. and as the other guy said they have no power. it would not even cut plexi glass. u could grab the cutting wheel with your fingers and stop it from spining. I just went out and bought my Craftsman for 35 bucks. now two years and hundreds of proj. later it is still working fine. i have not even had to change the brushes yet. Stay as far away from cheap stuff like that. there is a reason they are cheaper then the other tools. Good Luck if you do buy one.
  22. anything u do to that mess will help. run them behind the hd and mobo cover. or any thing
  23. OMG Flueler is at it again.lol. lookn good. that is one lucky son.
  24. Shadow334

    Hi All

    welcome, make ur self at home
  • Create New...