Jump to content

gimpy

Members
  • Content Count

    11
  • Joined

  • Last visited

Everything posted by gimpy

  1. Sounds like a bunch of tree hugging hippie crap if you ask me.
  2. Got the random access down from 18.3ms to 13.2ms. All I had to do was adjust the acoustic managment.
  3. Sorry for the 2nd post. I went to reply to my 1st post after seeing 28 views and no responses, I found I couldn't reply so I thought i'd try it again here. Ok I run HD-Tach and get good scores except the Random Access time, It is a blistering 18.3ms. Is there a way to cure this problem? The drive is a WD 80gig sataII (WD800JD-75LSA0). I'm Hitting 181 MB/Sec on burst speed, Average Read is 52.1, CPU Utilization is 2%. So am I stuck with a 18.3ms random access?
  4. Ok I run HD-Tach and get good scores except the Random Access time, It is a blistering 18.3ms. Is there a way to cure this problem? The drive is a WD 80gig sataII (WD800JD-75LSA0). I'm Hitting 181 MB/Sec on burst speed, Average Read is 52.1, CPU Utilization is 2%. So am I stuck with a 18.3ms random access?
  5. The first game I had on a console was pong. Then came Zork on the ole tandy trs-80 Should I feel old?
  6. Eric Johnson- Cliff of dovers
  7. I use 91% isopropyl and the good ole q-tip.
  8. I usually use memorex for cd's maxell for dvd's However if the cat does get on the desk and knocks a few loose and 1 lands vertical on the floor hard enough it will crack and fall apart making it usless.
  9. Try turning off the computer and when you turn it on press the insert key. This is supposed to set the bios back to defaults. and sets the mem at 100mhz. Its a nice trick if you do a bad oc and have to reset the bios. don't have to take out the batt.
  10. I had trouble oc this board when I got it. I found that the bios was the isue. I had the newest bios release 11.6 (b6.0). I could not take the FSB anywhere over 205. I flashed back to an older bios 11.3 (b3.0) and set the DOC to disabled. I now can go up to about 218 before it craps out now.
  11. When you run a defrag and wait for a score at the end.
  12. gimpy

    Noob Alert!

    I'll do my best to stay clear of them
  13. gimpy

    Noob Alert!

    Hi Everyone! I been reading and reading here for some time and thought I'd sign up. I'll try and not touch the llamas
  14. Hi all! Hows this for an oc xp2100 @ 2365mhz and a 6600gt
×
×
  • Create New...