Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by ill_industries

  1. thank you for that very informative reply <_< i will try to post ssome screenshots from the movie to see if anyone can identify
  2. i know this movie is old as dirt and many have not seen it or remember it, but i bought the movie about a year ago and am interested in finding out depending on how much you know about this movie, this is my question... i am looking for a list of the laptops that were used, specifically the clear one that was shipped to Dade what the heck is that thing? is it a mac? is there any way that some one out there would possibly know the model? i have tried emailing most of the old movie websites to find out that most of them do not exist or the site admin just wont reply to emails from their listed address. if you know what that thing is or could point me in a better direction, that would be awesome! thanks
  3. tiger does online rebates, so you dont have to mail anything in when you complete the order, you instantly get the rebate, input rebate info, the check and the hd are on their way!
  4. I need a x800xl!! i was completing my next comp build and recently fell into financial difficulties and all i need is this 1 last piece it is very generous for you to donate to fellow occ members most of which you have never met before your generosity will be remembered when i have alittle extra that i can give back
  5. howabout this for all you who bought dell junk .... Dude you got PWNED!
  6. why not trim a notch in the server's case? if you cant do that, get a server board from someone like TYAN
  7. well if i get a DFI LANPARTY UT 915P-T12 it comes with ddr and ddr2 slots will ddr2 4200 533MHz work with my p4 3.4 prescott with 800fsb?? or do i need the ddr2 800MHz?
  8. oh its definately ddr2, its printed on the ram itself came with my dell dimented 4700 check google punch in ddr2 3200 it comes up with a bunch of results its called pc2-3200 not pc-3200
  9. try unplugging everything (including all expansion cards and cd roms) only leave your keyboard and hard drive attached start into bios, set as 1st hard drive to boot, see if windows loads..
  10. i have 2 sticks of DDR2 SDRAM at 400MHz (pc3200) however when i look on newegg, they dont list any motherboards that run pc3200 ddr2 the drop down box only says ddr2 800, ddr2 667, ddr2 533 i also have an intel 3.4 prescott (lga 775) with this setup is the ddr2 800 that they list actually compatible with my ddr2 400mhz sticks? i am lost... lol
  11. im not a good dancer and the problem had nothing to do with an RMA whats the point of "online tech support" if it really doesnt exist if they didnt read my first email, they definately wont read the 2nd... im not bashing the product in any way ok im done now
  12. when you oc, you cant just crank the clock and leave everything else at stock make sure you up your FSB and voltages if you have some heave duty ram coolers, you might aswell go for upping the freq on em also
  13. i ended up fixing the problem i had with the board (no thnx to tech support) there was some ghetto soldering done to the main power connection on the under side
  14. (begin rant) i wrote through their online form the following after filling out the specs of the rig... Motherboard Model* p4mam2-v Revision* 1.0 CPU1 Brand/Model* intel celeron d Speed* 2.93 Package(Slot/Socket) socket 478 F.S.B.(66/100/133MHz) 533 Memory Module Slot1 Patriot 512mb 266MHz 2 Sided Slot2 Patriot 512mb 266MHz 2 Sided Display Card Type onboard Brand Name* onboard Model* onboard Graphic Chipset onboard Power Supply Brand Name* Thermaltake Model tr2 Wattage* 430w IDE Device none PCI Slot none Operating System none Problem Description* wont post with everything stated above no hd attached, no ide cables, no floppy, bought as a combo from tigerdirect, all brand new unused either a compatability issue with ram or cpu power will turn on, power led will illuminate, no sounds, no flashing lights etc., was tested inside case, removed from case and tested on a esd foam mat with same results... any help is appreciated and then their gay butt generic response..... Dear Customer, Please kindly refer to our test report for approved components to use with the system board: http://www.msi.com.tw/program/products/mai...ail.php?UID=644 Please kindly refer to our online troubleshooting guide for the issue: http://www.msicomputer.com/support/sup_tshoot.asp Please do verify all other components like the Processor, Memory Module, Video card, and Power Supply in another working system board to determine the cause of the problem. Please try with clearing the cmos setting on Jbat1 jumper or removing the battery on the mb out for 1 minute and put it back in with power off. Please test out the mb and components outside the case with mb box to support the board. This can prevent any short or grounding problem to the mb and it
  15. trust me, its been reset a few times <_< i ran Seatools and everything passed except the NTFS format can a corrupted format cause complete loss of use? theres a ton of files i need to get off this thing if it werent for that, i woulda ran killdisk and reformatted it along time ago update: i gave up with trying to save anything on the drive i ran Active Killdisk (2 passes) and attempted to install a fresh copy of xp... no luck
  16. ok heres the deal, im working on a friends system and i need to recover data from his hard drive on his system, the drive reads that the ntfs format is corrupted i plugged it into my computer to see if i cant get a look at whats left on the drive windows shows the drive in the device manager as installed and working fine however, when i open my computer, only my drives exist what am i doing wrong? ive already moved the jumper from slave to master and cable select with the same result p.s. it is a seagate barracuda 40 gig running IDE that im trying to access my drives run SATA but this shouldnt cause any conflict
  17. i actually rebuilt this thing for a guy at work it will be used for light internet use and ms office its only a small p3 800mhz, but you really dont even need that much to browse the net
  18. i thought i would show you all what i did to an older case i had laying around also this should help inspire some of you guys to think twice before donating that old case to the landfill well heres the shots...... all was done with alittle creativity and some spraypaint! these wouldnt fit: http://img.photobucket.com/albums/v149/ill.../0704050428.jpg http://img.photobucket.com/albums/v149/ill.../0704050430.jpg http://img.photobucket.com/albums/v149/ill.../0704050432.jpg http://img.photobucket.com/albums/v149/ill.../0704050524.jpg http://img.photobucket.com/albums/v149/ill.../0704050525.jpg
  19. i actually found this picture on ebay, theres a guy selling a few lots of them buth #2 and the 2 2/4 as seen above ebay link to auction
  • Create New...