Jump to content

RADEON

Members
  • Content Count

    563
  • Joined

  • Last visited

Posts posted by RADEON


  1. Newer video cards won't spin until they reach a certain higher temp, run a video benchmark and see if they ramp up.

     

    Yeah I just checked and when I start playing BF5 the fans spin up.

    But the problem is still there, when I play games no issue but it just artifacted and crashed on me a sec ago while watching a youtube video.

     

    Edit: I just ran furmark gpu stress test for a full hour with zero problems.

    Also I got a windows BSD error message, it said video scheduler internal error.


  2. Gigabyte x470 Aorus ultra gaming

    AMD Ryzen 1500x

    gigabyte rx 570 4gb

    8gbx2 Geil EVOS pear DDR4 2400mhz

    NZXT Hale 90 750w psu

     

    So I got everything built and all the latest drivers installed. It has happened twice so far, while I am surfing the internet or watching a video  or something artifacts will fill my screen and then

    the pc will freeze for a few seconds and the display will reset.

     

    I have played hours of Battlefield 5 and this never happened and also hours of the Witcher 3 and nothing. So far it has only happened will  I have been on the internet.

    I will also note that the psu is from my old system and I did not have these issues with that pc, so I don't think the psu is the culprit.

    And because it doesn't seem to happen while gaming I don't think it is heat related.

     

    I am not sure what to think.

     

    (edit)

     

    I just installed gpuz and noticed it said my gpu fans were not spinning, right now as I write this the gpu fans are not moving. !!!!!


  3. So my father just had a new Internet service provider set us up. But it s a new wireless thing. There is a unit on the telephone pole and then a wireless receiver on the side of my house.

    The router they gave is not like regular routers I have seen either. 

     

    This is the router they gave us - - - - > https://www.amazon.com/Mikrotik-hAP-AC-Lite-RB952Ui-5ac2nD/dp/B019PCF3QY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1506540128&sr=1-1&keywords=mikrotik+hap+ac+lite

     

    I want to get a new better router but i do not know what to get and what will work. There are two ports on this router for internet in. The internet service cable is plugged into the yellow port on the router I linked.

     

    So can any one shed any lite on what this and what kind of router I can get that will work?


  4. Specs:

     

    cpu: Intel core i5 3570k 1155

    mem: 16gb, 2x8gb patriot ddr3 pc3-12800 1600mhz (intel extreme masters version)

    MB: Intel DZ77RE-75K 

    PSU: corsair tx750m

    video card: evga gtx 770 2gb (superclocked edition)

    HD: intel 120gb 330 series ssb + wd 500gb black sata drive

     

    so basically my system will crash with out warning while playing some games. Some times while playing company of heroes and it will just CTD and that's it. The system dose not hang or reboot, just what ever game I may be playing will just close instantly. 

     

    In the past it has blue screened but it has been some time since it has done that. The crashing seem completely random.

     

    any one got any advice or ideas to try and track down the cause.

     

    Thanks

     

     


  5. Those are the foot steps from the deer, or enemies, ect . . . 

     

    there is a suit modification that allows you to see the path of your enemies, so you can track their movements to better plan your attacks.

     

    Disable the suit mod, press H to open the suit modification windows.


  6. Well aftwer looking around a bit I found that in the bios, my cell phone is detected, it show kyocera mass storage device as a bootable device, wierd. How come windows will not detect mass storage devices. 

     

    I have installed intels newest drivers, but still not luck.

     

    I am now also having trouble with planetside 2 and crysis 3 crashing on me, planetside actually BSOD on me. I am hoping that is a driver issue as there are others on the boards having some of the same issues.

     

    My god this build has been nothing but problems.

     

    So mu usb 3.0 ports will charge and in the bios storage devices are detected but now in windows environment.

     

    O and a new thing, if I shut my pc down for the night , the next morning I push the power button it boots fine, but if I restart from the windows start menu some times it will hang when starting back up.

     

    This is my first time going intel / nvidia and this sucks.


  7.  

    UPDATE!

     

    I RMAd the mother board and memory both to eliminate any possible problems with either. got them both back today installed into case and system booted up just fine. So far all seems fine.

     

    The only problem that remains is that the front panel usb 3.0 headers on the case that I have connected to the internal mother board usb 3.0 headers are not working. I can charge my phone but when I plug a usb drive into them windows dose not detect it.

     

    This has happened to me before with usb 2.0 case headers, and in the past I just ignored it, never really needed them. But now I want them to work. I do not think it is a defect with the mother board.  I checked the bios and it says that all the usbs are enabled.

     

    Not sure how to proceed.

    Have that same problem with my i5's Maximus V Formula board. Except somewhat opposite. With that one, the rear I/O USB3's dont work and Device Manger in windows shows errors. Despite fact I've downloaded the latest USB 3 Drivers off Asus site. I just disabled them in BIOS and called it a day. However the usb 3 ports on my case that are connected to the usb 3 header on board work perfectly..

     

     

    I got to figure something out because I need at least one usb port for a usb storage device. I havnt checked the back haeders yet, they are hard to get to as my pc is under mydesk, but if they work Ima just have to run a cord or something for now.


  8. UPDATE!

     

    I RMAd the mother board and memory both to eliminate any possible problems with either. got them both back today installed into case and system booted up just fine. So far all seems fine.

     

    The only problem that remains is that the front panel usb 3.0 headers on the case that I have connected to the internal mother board usb 3.0 headers are not working. I can charge my phone but when I plug a usb drive into them windows dose not detect it.

     

    This has happened to me before with usb 2.0 case headers, and in the past I just ignored it, never really needed them. But now I want them to work. I do not think it is a defect with the mother board.  I checked the bios and it says that all the usbs are enabled.

     

    Not sure how to proceed.


  9. Radeon - the one big difference between the RAM that works and the RAM that doesn't is the density of the RAM modules themselves.  8Gb sticks have 4x the density of a 2Gb stick and that may be causing the problem.  Have you tried manually setting the memory frequency down to 1333Mhz, four primary timings to 8-8-8-24 and DRAM voltage to 1.5v

     

    It would be interesting to see if the board boots then.

     

    Regardless - I wouldn't be too happy with a board that couldn't run what the specs. the mfg. says it will run.

     

    Exactly, this thing should boot no problem. This is one of Intel's highest end boards, and Patriot says that the memory was specifically designed for this chip set board, so . . . 

     

    Also after looking at the mob box, it seem like it could of been opened before i got it. It looks like it was closed with regular packing tape, I don't know if Intel uses a hand held packing tap dispenser to close their MB boxes. So maybe New Egg sent me a board that had been returned before.

     

    O well, the memory and MB are in the mail back to new egg right now, so In about a week I should have the new parts and I'll try again.


  10. If you can return the board then get an RMA. But if you have the same issues with the new board then we know it is a driver and settings issue with some of you problems.

     

    Both new sticks of ram work in the new board 1 at a time? Both is a no go in either system?  Return it as well.

     

    Yeah i got an rma for the ram and also for the mb. its easier this way. Like you said if I still run  into the problem then I know it is a setting or driver. 

     

    But one thing that makes me think that its an actual hardware defect is the fact that even after I  got it to boot with one stick of the new ram I got memory read write errors and a BSD and then it has hung on post three times today.

     

     the  weird thing is that I had a another set of identical ram over knighted to me because I did not want to wait for the original ram to get back from rma and that ram also would not post. So either I got two sets of bad ram or there is something wrong with the MB.

     

    This is just a really weird situation, some ram works the new stuff won't, symptoms seem like ram problems but . .. 

     

    O well I will just wait for the new board from rma and the new ram from rma.


  11. Radeon -

     

    With the working memory modules still installed.  Boot into BIOS and load optimized defaults.  Now go to the memory configuration settings and manually enter in the four primary memory timings of the 8Gb sticks you want to use.  Also set the DRAM voltage at 1.55v.  Save changes, exit and shutdown.

     

    With machine still powered down, pull old memory and install new memory.  Boot up into BIOS (hopefully you can).  Load optimized defaults again, before exiting go back to memory configuration and reset the four primary memory timings and dram voltage (usually you can find the specs. on the stickers pasted onto the memory modules).

     

    Save changes, reboot and run Memtest before you proceed any further.  Let Memtest run at minimum 3-4 hours (but the longer the better).

     

    Let's get your memory issues straightened out first and then we can see if we can figure out the USB 3.0 problem.  However, my guess on that is;

     

    1. USB 3.0 not enabled in BIOS

    2. USB 2.0 Legacy support enabled or disabled (need to try it both ways)

     

     

    All right so I set the timing of the 8 gig sticks manually and set voltage to 1.55, same thing, no post, 3 beep code.

     

    The thing is the mem that dose work, 2 x 2gig has timings 9-9-9-28 and 1600mhz.

     

    The 8 gig sticks have timings 9-9-9-24 and 1600mhz, so they are almost identical.

     

    So I am kind of dumbfounded. I am going to ttry the 8 gig sticks in my old system just for the heck of to make sure they are good. I now have to set of the patriot 2 x 8gig and both do the same thing in the intel board.

     

    Also I did update the bios to the latest. And as for the usb 3.0 i did install intels latest drivers.

     

     

    (EDIT) just FYI i tried to contact Intel support, they put a character limit in the question window, so you can only ask short questions. WTF Intel!

     

    Because I have 2 sets of the patriot ram that dose not work in the board and the ram that dose work is almost identical I am thinking this is MB related. But I do not know what to try next.


  12. Thanks for the replies guys. I just successfully updated the bios to the latest. How ever the USB 3.0 ports still do not work, I can use the regular USB ports though.

     

    I am scared to try the memory to see if the bios update may have helped.

     

    I did also download Intel's SSD diagnostic tool for their SSD drives and a quick test came back ok. And yes to your question it is a brand new SSD.

     

    So right now I just got to get the &@!!$ to try the memory to see if the bios update helped.

     

    I'll post back tomorrow with news.

     

    Thanks.

     

     

    (EDIT) Tried the memory after the bios update and still a no go. So the board seems to work with 2 x 2gig 1600mhz 1.5v sticks , but the 2 x 8gig 1600mhz 1.5v sticks do not work. (same slot on board also) So looks like it is my memory.

     

    The thing is the new memory is supposed to be designed for Intel boards and hand tested! So much for patriots advertisements. I got some new memory coming so I'll test that, that will tell me if it is the mother board for sure.


  13. I just built a new system after a long time away from the hobby. 

     

    Intel dz77re-75k

     

    Intel core i5 3570k

     

    18 gigs / 2x 8 gigs patriot Intel extreme masters ddr-3 1600mhz

     

    intel 330 series 120 gig ssd

     

    evga nvidia gtx660ti ftw signature 2

     

    corsair tx750m power supplie

     

    win 7 home premium

     

    First boot up no go, got three beeps, codes for mother board said it was memory error, took out a stick of memory, got boot up.

     

    installed win, during updates and downloading and installing drivers got read write error and BSD!

     

    Took the memory out of my old system and installed it dose not seem to be any more problems. fingers crossed.

     

    How ever there have been a few finicky moments, for instance after a windows update the system rebooted a number of times before entering win, I am not sure if this was function of the updates or an error.

     

    Also the usb 3.0 ports on my mother board do not seem to work, the regular ones see my thumb drive but not the 3.0. I have installed Intel's usb 3.0 drivers from their website.

     

     

     

    So here is were I am at, I need some way of testing my rig to see if there are any other problems like maybe with my hard drive or the mother board, and also I got to find out why my usb 3.0 ports do not seem to work.

     

     

    Any help is appreciated. I am really down to a wire with this. I built this system in part to run revit 3d architecture and other architectural modeling programs for school.

     

    Thanks

     

     

     

     

     


  14. I have a dual 6850 setup and the fan on one of them is dying.

    I have considered water cooling my whole system just for the cool factor, but this may be quite expensive.

    So I was wondering if any one had any suggestions on good air coolers for these cards.


  15. sorry , this might seem harsh ... why watercool such low end stuff. all the money you will spend on the water cooling .. upgrade parts. ... also do they even make waterblocks for 6850s ?

     

    Apparently you did not read my post. I stated very clearly that I know that water cooling is over kill, but i just wanted a cool way to mod my comp. You should read the post before you reply to it.


  16. I am considering water cooling my rig. I will be cooling an AMD 955 x4 and dual AMD 6850s.

    I am unsure if I should go with two 120 rads or maybe a single dual 120, and also I am unsure if I'll need two pumps or maybe one big one?

    Also, any thoughts on pumps and reservoirs? Are there any suggestions on tube ID size?

     

    I know this system is not top of the line and a hard core water cooling system might be over kill but I just want a cool way to mod my comp,

    and i think this will look cool.

     

    I am currently using an NZXT phantom case, http://www.newegg.com/Product/Product.aspx?Item=N82E16811146067


  17. Not happy with this game. Extremely static environments. Clunky cover controls, Bland graphics, the game feels like it should of been released 5 or 6 years ago.

     

    I'm sure the story will hold up, and the mini hacking game is cool, as is the character customization, but over all I think game play is outdated.


  18. After the benchmark is finished, it gives your score with a save option. Click save, a new window pops up with the path and renaming options for the .html file. Name it whatever, just make sure it is .html :thumbsup: The default folder I believe is My Documents ;)

     

    I have the file saved but I can not open it. None of the programs on the list it gives me will open it. It is an html file.

×
×
  • Create New...