Jump to content


j00fek's Content

There have been 10 items by j00fek (Search limited from 24-March 16)


By content type

See this member's

Sort by                Order  

#1343938 pci-e slot dead/dying?

Posted by j00fek on 11 August 2006 - 07:44 AM in Processors, Motherboards and Memory

came home, dissapated the capasitors in the system by turing off the power switch on the PS then pressing the power button 5 times, booted up and no blocky post/bootup screen , is there a chance that thge capasitors on the board are dying?



#1343053 pci-e slot dead/dying?

Posted by j00fek on 10 August 2006 - 07:15 AM in Processors, Motherboards and Memory

after connecting the floppy connector the problem seemed to go away for a couple of weeks.
this morning after i got up booted the comp up and got another blocky post screen (all 4 connectors are plugged in).



#1325876 pci-e slot dead/dying?

Posted by j00fek on 20 July 2006 - 07:03 AM in Processors, Motherboards and Memory

left the comp on today while im at work, after i plugges it in the otherday i didnt have a blocky start up. but ill have to see when i reboot or leave it off again for a peroid of time :D



#1324484 pci-e slot dead/dying?

Posted by j00fek on 18 July 2006 - 12:51 PM in Processors, Motherboards and Memory

never had the floppy connector in, wow ill plug it in and see whats up.

thnx



#1324194 pci-e slot dead/dying?

Posted by j00fek on 18 July 2006 - 06:33 AM in Processors, Motherboards and Memory

freaky thing has just started happening. after shutting comp off for the day i come home and turn it on. after turing it on the bootup screen is all blocky and pixelated. the only way to fix this is to reseat the vid card into the first pci-e slot. should i try the other slot? is it x16 like the other one? i have posted this on the evga community board with no replys yet


thanks



#1262228 G.Skill HZ/Any other UCCC (2x1024) 260+ please post here

Posted by j00fek on 12 May 2006 - 05:48 AM in Overclocking and Cooling

Hey Guys,
I just sold my 2GBHZ kit because my old Mushkin Redlines just got back from RMA but it was pretty good while I had it! I'll post a screenies from my "Overclocking Database entry. This is my Prime95 + 3DMark01SE shot. My kit was very stable up to about 268Mhz but I kept it at 265Mhz at 3-4-4-8 which seemed to be the sweet spot at 1:1.

Posted Image

Genie BIOS Settings:

FSB Bus Frequency - 265
LDT/FSB Frequency Ratio - 3x
CPU/FSB Frequency Ratio - 11.0x
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - Startup

CPU VID Control - 1.325v
CPU VID Special Control - Above VID * 112.0%
LDT Voltage Control - 1.30v
Chip Set Voltage Control - 1.62v
DRAM Voltage Control - 2.71v


DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/FSB:01/01
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 04 Bus Clocks
Row Cycle time (Trc) - 15 Bus Clocks
Row refresh cyc time (Trfc) - 17 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 04 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - 7.0ns
DRAM Response Time - Fastest
Read Preamble Time - 5.5ns
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)



hey guys, i have to thank Roger_D25 for his post since i was having trouble with my settings and used all of his. only thing i had to do was lower the fsb to 263, i had to do this because while running p95+sp2004 i got hardware errors. (263 is memtest stable 9hrs) its running now (p95+sp2004,but im at work) seemed fine before i left.

so the ram is @263mhz 3448 1t now. can anyone recommend another setting to change so i could get up to 270? would it be more tras? :rolleyes:



#1245416 cpu-z not showing ram mhz

Posted by j00fek on 26 April 2006 - 11:36 AM in Overclocking and Cooling

yeh it was the 140 divider. thnx for the info on what ones dont show up



#1244298 cpu-z not showing ram mhz

Posted by j00fek on 25 April 2006 - 01:38 PM in Overclocking and Cooling

wondering why cpu z is not showing me what the mhz is on the ram
CPUZ

fixxed url



#1141348 Ready to OC my opty 148...

Posted by j00fek on 20 January 2006 - 04:43 PM in Overclocking and Cooling

thanks will do. im thinking it will be an all nighter :rolleyes: . going to pick up 4pk of redbull after work and get to buildin!



#1141279 Ready to OC my opty 148...

Posted by j00fek on 20 January 2006 - 04:01 PM in Overclocking and Cooling

ready to start clocking my 148 tonight after werk... should i just follow the reg A64 oc guides? :confused: