Jump to content

Erosannin

Members
  • Posts

    272
  • Joined

  • Last visited

About Erosannin

  • Birthday 02/19/1986

OCC

  • Folding@Home
    3r0s4nn1n
  • Computer Specs
    WarMachine
    CPU : Intel i7-7700K @ 4.9GHz
    RAM : GEIL Evo Potenza 16GB DDR4 Dual Channel 3000MHz CL15
    GPU : ASUS ROG GTX1070 Strix OC 8GB
    SSD : Samsung 960 EVO 250GB m.2 NVMe
    HDD: Seagate FireCuda 2TB
    Keyboard : Razer DeathStalker Chroma
    Headset : Razer Kraken 7.1 Chroma
    Mouse : Razer Mamba Tournament Edition Chroma
    Mouse Mat: Razer Goliathus Speed
    Monitor: BenQ Gaming XL2410T 24" 120Hz

Profile Information

  • Gender
    Male

Erosannin's Achievements

Newbie

Newbie (1/14)

  1. I don't know if any of you guys know someone that design plans for Custom computer desk with the components integrated in it. I'd like to have a design made for me so I can build the desk myself. I know some members did that in this forum. Please help me.
  2. I recently changed the processor from an A8-4500M (Trinity) to an A10-5750M (Richland) and as per internet, it should perfectly work, The laptop turns on but the monitor (which is new) stays black and nothing moves. Some people say that I might need a Bios upgrade in it. I went on the HP website and they released a new bios March 1st 2016. I want your opinion on this as the processor outputs some heat which means that it's somehow working.
  3. I just purchased this one. and no I don't have any other cable. I reinstalled the drivers also to no avail.
  4. Hi guys, I'm kinda lost as I have a 3D Computer Monitor (ASUS VG236H) and it cannot reach 120Hz using a Dual Link DVI. It becomes blurry as hell like when I tried using a normal DVI cable. The refresh rate is available at the driver level as the monitor is recognized as 120Hz capable by my NVidia card. I will try a complete electrical reset from the monitor and report what happens. If you have any clues or test I will do it. Edit: Complete electrical reset of the monitor didn't do anything.
  5. Cache Ration is at 42 and Core ratio is at 44 All tested stable Not getting past 77 degrees in full load (on 1 core otherwise it's more in the range of 72).
  6. My cache ratio is at 42 right now (same as my CPU) and it runs pretty fine with the voltages I told you. If I try to work 4.4GHz I can go as high as 1.35VCore and it is still not stable.
  7. Hello I recently had to RMA my entire computer (except the case and optical drive). When I sent my dead i7-4770K to Intel I had quite a good OC chip (1.10 VCore for 4.2GHz and 1.28Vcore for 4.8GHz). Now I got my new CPU and to stabilise it at 4.2GHz it takes 1.235VCore (4.6GHz was never found stable even with 1.48VCore). My motherboard is an ASUS Z87 Gryphon and I might need a bit help as Haswell doesn't OC like SB and IB (at least with this board). I googled some guide to OC on my board and never found real good stuff. Help me please?
  8. El_Capitan I sent you a PM for the best of the 2 GTX970s you got.
  9. tried 2 older ones that were 100% working before and no luck.
  10. But my Keyboard works perfectly well. All the Media keys are working and the backlighting is there. I just can't change the lighting color or turn it off. That's weird.
  11. Computer is back on its feet and running perfectly now.
  12. I recently had to RMA all the components of my computer because of a shitty Corsair HX850 that blew everything. Now I reinstalled my Windows 7 x64 and all drivers. When I installed the Logitech Gaming Software, only my G700s was detected by it and not my G110. I already tried to uninstall the Software + generiic keyboard drivers and to reinstall both without avail. Any ideas?
  13. Yes it was hooked up to my computer and I was about to fire up the beast to freshly install Windows and play games but the PSU killed everything.
  14. I plugged a Corsair HX850 that didn't turn on but the fan spin for like 1/8th of a turn and it stopped there after. Is it possible that this killed all the stuff I mentionned?
×
×
  • Create New...