Dlauth
Members-
Posts
8 -
Joined
-
Last visited
Dlauth's Achievements
Newbie (1/14)
-
Have a few questions on the 7950 card. Ordered this card off amazon hoping it was going to be the 16-20g instead I got the 19-20g and I can not change the voltage. It will not unlock in afterburner after unofficial OC, I tried trix. Even gpuz will not show a few of the voltage settings like my other sapphire 7950 cards show. Any way to unlock this or bios flash or should I try and return it? Second, looking into another 7950. If you had to purchase today, what is the cheapest, best cooler, voltage unlocked 7950 that you can get? Thank you
-
if I revert to the stock setting on my card , it just jutters even worse. Also I made a mistake, I have a 4200 not a 2400. I need to find out if it is my card or my cpu. I can do the evga step up and get a gtx 260 core 216 for $90 bucks more or I can get a Phenom and a new board, but I just need to find the culprit to my problem.
-
I'm running it at 1920 x 1080. I have a amd 2400 oced to 2.5.
-
I just replaced my 8600gts with a 9800gtx+. I have a new 750w power supply with 60a 12v rail. I have a 24" monitor. The problem is that when I turn my settings all the way up on modern warefare 2 it runs choppy. Ive talked to a few people on the game with the same card as me and they say it runs fine for them. I have the latest drivers and I even overclocked the card to 830 core/ 1950 shader/ 1215 memory. What could be the cause of my card not running the game? Thanks
-
Please look at my OC : Cant get past 2.69
Dlauth replied to Dlauth's topic in Overclocking and Cooling
Ok I will try that and get back with results. Also is it either faster processor or faster memory? Benifits of each? Also are 4 dimms just as stable as 2? -
Please look at my OC : Cant get past 2.69
Dlauth replied to Dlauth's topic in Overclocking and Cooling
Ok so I need to lower timing on my ram? In bios? -
Please look at my OC : Cant get past 2.69
Dlauth replied to Dlauth's topic in Overclocking and Cooling
what speed should I be looking at that can not go past 800mhz? also how do I change the ram divider? Does it make a difference if I have 2 dimms or 4 dimms stability wise? -
Ive been messing with the settings and cant get it to pass 2.69. I origininaly had 4 dimms of ram, took 2 out because I heard it would make it more stable to use 2 dimms rather than 4? All memory settings are on auto but I did manually set 2T. Also, I have all the voltages maxed out for the cpu, HT and whatnot. System Specs AMD x2 4200 Asus m2n-SLI Deluxe 2 2g Corsair XMS2