fartonmyear Posted June 29, 2005 Posted June 29, 2005 yeah. i kept trying to run prime95 at 270 htt, 260, 250, and they all didn't work. so i tried doing it on stock and not to my surprise, it didni't last a minute. wtf? Share this post Link to post Share on other sites More sharing options...
SaFrOuT Posted June 29, 2005 Posted June 29, 2005 which test r u suing i am sure u r using either the second or the third test please be sure that ur ram r stable on memtest test 5 or test8 for aorund 30 min before trying to run prime and when u use prime run the first test only @ the start which check the stability of the cpu only to be sure it is stable and then run the second test which test the ram and the cpu together Share this post Link to post Share on other sites More sharing options...
fartonmyear Posted June 29, 2005 Posted June 29, 2005 shouldn't my computer be stable using the blended torture test on stock though? Share this post Link to post Share on other sites More sharing options...
Portugal Posted June 29, 2005 Posted June 29, 2005 flash to bios version http://www.lejabeach.com/DFI/dfinf4ultra/N4D623-2.zip,use the ram in yelow slots,http://www.lejabeach.com/DFI/dfinf4ultra/N4D623-3.zip give prime errors evem at stockspeed.sorry my english is bad. Share this post Link to post Share on other sites More sharing options...
fartonmyear Posted June 29, 2005 Posted June 29, 2005 huh? rephrase that. i have the 3-10-05 bios version and i put them ram in the yellow slots. still doesn't last a minute in prime. Share this post Link to post Share on other sites More sharing options...
red930 Posted June 29, 2005 Posted June 29, 2005 There are different ver, of prime,you have to use one of the newer ones optimized for NF4,can't remember which one it is Which ver. are you tryin to run? Take a look here, http://www.dfi-street.com/forum/showthread.php?t=12586 Share this post Link to post Share on other sites More sharing options...
fartonmyear Posted June 29, 2005 Posted June 29, 2005 i've used the one listed on the link. i've also used the most recent version. Share this post Link to post Share on other sites More sharing options...
fartonmyear Posted June 29, 2005 Posted June 29, 2005 i think one of the ram is weird. i moved it and it seems to be ok. it passed OCCT. previously it would stop at 28 minutes. Share this post Link to post Share on other sites More sharing options...
RyderOCZ Posted June 29, 2005 Posted June 29, 2005 The 3/10 bios you should be in the orange slots.....I recommend the 618-2 or 623-2 from: http://www.techpowerup.com/articles/other/114 and using the yellow slots Share this post Link to post Share on other sites More sharing options...
fartonmyear Posted June 30, 2005 Posted June 30, 2005 i installed both bios updated and my onboard nvidia lan can't connect to the internet and it says there's a new hardware found, but it can't install it. EDIT: FREAK. one of my ram sticks is messed up. it failed a WHOLE bunch of memtest tests. what should i do? Share this post Link to post Share on other sites More sharing options...
oliveryochest Posted June 30, 2005 Posted June 30, 2005 FREAK. one of my ram sticks is messed up. it failed a WHOLE bunch of memtest tests. what should i do?If one of the sticks failed, you should definately RMA the set back. You can PM AndyOCZ for your RMA. He'll take good care of you Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted June 30, 2005 Posted June 30, 2005 5/10 or later bios for Venice/San Diego/X2 support -2 is what i use for all memories including VX Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now