Came across this article with my friend google, if your building a miner with usb risers take a look if might prevent some headaches.
Jump to content
Posted 25 November 2017 - 05:47 AM
Processor Intel Core I7 4690X 4.3Ghz
Memory G.Skill RipJaws 32GB 2400Mhz
Motherboard ASUS Rampage IV BE
Graphics GTX TitanX x2
Power Corsair AX 1200,
Monitor ASUS PQ321Q
Cooling Liquid by comittee
Storage OCZ RevoDrive 350 480GB Seagate 8TB
Follow OCC on
Posted 26 November 2017 - 09:20 AM
Thanks RR !
Good information and a lot to consider...
i'm not mining anything and haven't for some years,but i live and work from a somewhat older triple wide mobile, that was designed with an older paradigm in mind, so i have to be careful what i plug in and breaker circuits involved...
My gamer is on a circuit by itself, while the office has two continuous running units, the camera server that never shuts down and the Sheila's business rig which almost never shuts down. And then there's the Big office printer, and big monitors and and typical office equipment etc. There are two 15 amp circuits in the office, and quite alot of full time draw, and i have spread out the load so that it's not all on one circuit...bottom line is i'm nearly at the limit for the office,... but the article spells it out and for that i'm grateful.
#1) gaming, ASUS X99-A I7 email@example.com,CoolerMaster Hyper 212, 48gb Corsair Vengence @2400, ASUS 1080 Strix Edition, 1tb Samsung 850 EVO and 2x600gb WD velociraptors, Sony OptiarcDVD rw, Corsair 1050w, win10pro64, Corsair Obsidian 800D,
Warweeny: " just let it go, be free and relax ! "