Jump to content

Water 3.0 Ultimate


Recommended Posts

http://www.thermaltake.com/products-model.aspx?id=C_00002345
Questions: Is this cooler compatible with Corsair 730T case?
Is this cooler adequate for i7 4790k on high overclock @5.0Ghz
Is it better to connect water pump on cpu-opt or direct on psu?
Use the pre applied thermal paste or apply something else like ARCTIC MX-4?
Thank you.
http://www.corsair.com/en-eu/graphite-series-730t-full-tower-case?
 

Share this post


Link to post
Share on other sites

The 730T supports 360mm rad in top, but you will be into top drive bay.

 

A 360mm AIO cooler will be one of the best cooling solutions for 4790K,.. if it is adequate @ 5.0Ghz overclock depends on Vcore, ambient air temp, and CPU load,.. you will need to test and see what results you get. 

 

You will want to connect water pump as per instructions,.. most likely to 12V CPU fan header.

 

If you have Arctic MX-4 on hand,.. I would use it. Otherwise the pre-applied TP would be fine. 

  • Like 1

Share this post


Link to post
Share on other sites

The 730T supports 360mm rad in top, but you will be into top drive bay.

 

A 360mm AIO cooler will be one of the best cooling solutions for 4790K,.. if it is adequate @ 5.0Ghz overclock depends on Vcore, ambient air temp, and CPU load,.. you will need to test and see what results you get. 

 

You will want to connect water pump as per instructions,.. most likely to 12V CPU fan header.

 

If you have Arctic MX-4 on hand,.. I would use it. Otherwise the pre-applied TP would be fine. 

 

Thank you! :)

Edited by panoverclockers

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...