Posted 04 October 2016 - 04:54 AM
For my build I will be using the following
Asus rampage 3 extreme
12GB Mushkin ram
4 EVGA 670 4GB Superclocked +
Intel 480GB SSD
EVGA T2 1600w
For the case it will be more of a test bench layout, ill be using 2 aluminum plates 3/16" thick 18" wide by 16" deep. The two plates will be separated by 6 1/4" aluminum round bar 6-7" tall. On the bottom plate will be two 360mm RX XSPC radiators, PSU, and ether a single or dual pump. Since each GPU uses 2 6 pins for power im going to make up a cable from the PSU that will end in a 24pin plug that will mount from the bottom top plate. then make another cable that will go from the 24 pin and break out to 4 6pins to power 2 cards.
SoI will have to make 2 24 pin plugs for the cards, a 24 pin for the motherboard, 2 8 pin for the cpu, and a 4 pin molex for the motherboard pci lanes. Overall its more work then what I want to do but if done right I think it will look good.
Primary Rig - i5-4670k - Asus Maximus VII Hero - Mushkin Enhanced Redline 16GB @ 2133 CAS9 - Evga GTX 980 - Silverstone 1200w
Second Rig i5 2600K @ 4.2Ghz -Asus Maximus IV Gene-Z -Mushkin Redline ddr3 8Gb -EVGA 780 ti classified -Silverstone 850w
Third Rig - MSI GT60 2OD Laptop - i7 4700MQ @ 3.2Ghz - 16Gb ram - Nvidia GTX780m - 128,120,240msata ssd - 1TB HD
Fourth Rig -i7 980x @4.2GHz -Asus Rampage 3 extreme -Mushkin Ridgeback ddr3 12Gb -4 GTX 670 superclock+ -Evga 1600W G2
I dont fail. I just succeed at finding out what doesn't work.