Posted 10 April 2012 - 12:06 PM
I have the following in one loop and am looking for the optimal flow rate that I should be seeing. I have viewed may forums and the consensus seems to be that a good flow rate should be 1200LPM or 5.2 GPM. I am seeing 1.25 to 1.5 GPM with one loop and the following in the loop.
RP452X2 rev 1.3 with 2 PMP 450 in series with the TMS-205 and the PUMPs (dial set to 5 on pump) and Level 7 (8.75V) on the TMS 205 Sofwtare Control Software
EK Dominator X4 Ram Block (x 2)
EK HF Supreme CPU Block
EK FC680 GTX GPU blocks (x2)
The flow is RP452x2 > SR1360 >SR1480 > Ram Block1 > CPU >Ram Block 2 > GPU 1 & 2 (EK FC Parallel Bridge) > IMS-FM18 Flow Meter > RP452X2
I also am using Koolance VL3N QDC's ate the RP452x2, SR1 360 and SR1 480 and CPU block.
The Motherboard is an MSI Big Bang XPowerII and am running a i7-3630K (not yet overclocked) . Ambient is about 23C and CPU temps are about 25-27C at idle and not over 50 under load (Prime 95). The GPU temps (2 GTX 680,s) under load Unigine Benchhmark at 42-45C.
Any assistance would be welcome. Thanks.
i7-3630K on an MSI Big Bang XPower II, CORSAIR 32GB (4 x 8GB) 240-Pin 1600MHx XMP
Case Labs STH10 Case Reverse Layout, CORSAIR AX-1200W PSU
OCZ Revodrive 3 X2 240GB (Boot Disk)
OCZ Vertex 3 120GB SSD 8x (RAID 0) (Video, Editing, Gaming, ) on LSi-9260-8i & Samsung Sprinrite 2TB and Seagate 2TB XT (Data Disks) on X79 STA 3 Ports
Gigabyte GTX-680 2GB L x2 SLI - Water Cooled EK Blocks
Hauppauge HD PVR
Koolance RP452X2 Res w 2/ PMP450 Pumps in serial, HL SR1 360 & SR1 480 Radiators, HF Supreme CPU Block, Dominator X4 Ram Blocks (Trebwerk TF121 fans on SR1480 and GT AP15s on the SR1360 all Pull)
Displays- DELL 3011 & DELL U2410 x-2
Windows 7 Pro x64
Razer Black Widow Ultimate Stealth Keyboard, Cyborg R.A.T. 7 Mouse, Logitech G930 Headset, Klipsch Promedia 5.1 Surround Speakers(still works awesome)