Jump to content

Testing 1035T With The ASUS 4A89TD Pro


Praz

Recommended Posts

X6 1035T @ 200x15.5, 8GB Memory @ 1600MHz, Post 1 Of 3

 

 

A quick test at mostly stock settings to get a feel for the board. As the screenshots show I am able to manually lock in the Turbo multipliers in the BIOS. I'm not sure if this is because of the chip or the board/BIOS is allowing it. I have asked for clarification and will post the info when I receive it.

 

 

ASUS 4A89TD Pro, 0502 BIOS

Phenom II X6 1035T

4x2GB OCZ Platinum AMD Edition (OCZ3P1600LVAM4GK) PC3-12800 1600MHz 7-7-7-24

200x15.5, Memory @ 1600MHz 7-7-7-24

OCZ 100GB Vertex LE100

SAPPHIRE 4870x2, 4870 Trifire

OCZ Z Series 850W

 

 

 

main1_l.jpg

 

main2_l.jpg

 

dram1_l.jpg

 

dram2_l.jpg

 

advanced_l.jpg

 

north_l.jpg

 

 

[b][color="Red"]Configure System Performance Settings[/color][/b]

[b]----------------------------------------------------------[/b]

[i]Target CPU Frequency:. 3100MHz[/i]
[i]Target DRAM Frequency: 1600MHz[/i]

[i]CPU Level Up......................[Auto][/i]
OC Tuner Utility
AI Overclock Tuner ..................[Auto]
CPU Ratio............................[15.5]
CPB Control..........................[Disabled]
DRAM Frequency.......................[1600MHz]
CPU/NB Frequency.....................[Auto]
HT Link Speed........................[Auto]
> DRAM Timing Configuration
> DRAM Driving Configuration
[b]************* Please key in numbers directly! *************[/b]
CPU & NB Voltage Mode................[Offset]
 CPU Offset Voltage.................[i]1.284[/i] [Auto]
 CPU/NB Offset Sign.................[+]
 CPU/NB Offset Voltage..............[i]1.225[/i] [0.075000]
CPU VDDA Voltage.....................[i]2.496[/i] [Auto]
DRAM Voltage.........................[i]1.643[/i] [1.65000]
HT Voltage...........................[i]1.196[/i] [Auto]
NB Voltage...........................[i]1.096[/i] [Auto]
NB 1.8V Voltage......................[i]1.800[/i] [Auto]
SB Voltage...........................[i]1.100[/i] [Auto]
[b]**********************************************************[/b]
CPU Load-Line Calibration............[Auto]
CPU/NB Load-Line Calibration.........[Auto]
CPU Spread Spectrum..................[Disabled]
PCIE Spread Spectrum.................[Disabled]


[color="Red"]DRAM Timing Configuration[/color]

DRAM CAS# Latency....................7 [7 CLK]
DRAM RAS# to CAS# Delay..............7 [7 CLK]
DRAM RAS# PRE Time...................7 [7 CLK]
DRAM RAS# ACT Time..................24 [24 CLK]
DRAM READ to PRE Time................6 [Auto]
DRAM Row Cycle Time.................31 [31 CLK]
DRAM WRITE Recovery Time............12 [Auto]
DRAM RAS# to RAS# Delay..............6 [Auto]

DRAM READ To WRITE Delay.............6 [Auto]
DRAM WRITE To READ Delay(DD).........2 [Auto]
DRAM WRITE To READ Delay(SD).........6 [Auto]
DRAM WRITE To WRITE Timing...........4 [Auto]
DRAM READ To READ Timing.............4 [Auto]
DRAM REF Cycle Time................110 [Auto]
DRAM Refresh Rate..................7.8 [Auto]
DRAM Command Rate...................1T [1T]


[color="Red"]DRAM Driving Configuration[/color]

[i]DCTO Information:[/i]
CKE drive strength..................2X [Auto]
CS/ODT drive strength.............1.5X [Auto]
ADDR/CMD drive strength.............2X [Auto]
MEMCLK drive strength.............1.5X [Auto]
Data drive strength..............1.25X [Auto]
DQS drive strength...............1.25X [Auto]
Processor ODT...................60ohms [Auto]
[i]DCTO Information:[/i]
CKE drive strength..................2X [Auto]
CS/ODT drive strength.............1.5X [Auto]
ADDR/CMD drive strength.............2X [Auto]
MEMCLK drive strength.............1.5X [Auto]
Data drive strength..............1.25X [Auto]
DQS drive strength...............1.25X [Auto]
Processor ODT...................60ohms [Auto]


[b][color="Red"]CPU Configuration[/color][/b]

[i]AGESA Version 3.7.0.0[/i]

----------------------------------------------------------

[i]AMD Phenom(tm) II X6 1037T Processor
Revision: E0
Cache L1: 768KB
Cache L2: 3072KB
Cache L3: 6MB
Speed   : 3100MHz
uCode Patch Level:       0x10000BF[/i]

----------------------------------------------------------

Microcode Updation..................[Enabled]
Secure Virtual Machine Mode.........[Enabled]
Cool'n'Quite........................[Enabled]
C1E Support.........................[Enabled]
ASUS Core Unlocker..................[Disabled]
CPU Core Activation.................[Auto]



[b][color="Red"]DRAM Controller Configuration[/color][/b]

----------------------------------------------------------

Channel Interleaving................[Auto]
MemClk Tristate C3/ATLVID...........[Disabled]
Memory Hole Remapping...............[Enabled]
DCT Unganged Mode...................[Always]
Power Down Enable...................[Disabled]

 

 

3100_1600_lin_l.jpg

 

3100_1600_mem_l.jpg

Share this post


Link to post
Share on other sites

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

X6 1035T @ 200x15.5, 8GB Memory @ 1600MHz, Post 3 Of 3

 

 

3dx Max 2009 w/V-ray

Time to render: 8min 04sec

 

lounge_night_benchmark_800.jpg

 

 

TMPGEnc XPress

1GB VOB file ripped from DVD movie

 

3100_1600_encode_l.jpg

 

 

3100_1600_cin_l.jpg

 

 

3100_1600_cin11_l.jpg

 

 

3100_1600_everest_l.jpg

Share this post


Link to post
Share on other sites

As the screenshots show I am able to manually lock in the Turbo multipliers in the BIOS. I'm not sure if this is because of the chip or the board/BIOS is allowing it. I have asked for clarification and will post the info when I receive it.

You can tweak Turbo at will within OverDrive, it's nice that ASUS added it in the BIOS :)

Share this post


Link to post
Share on other sites

X6 1035T @ 266x15, 8GB Memory @ 1419MHz, Post 1 Of 3

 

 

ASUS 4A89TD Pro, 0502 BIOS

Phenom II X6 1035T

4x2GB OCZ Platinum AMD Edition (OCZ3P1600LVAM4GK) PC3-12800 1600MHz 7-7-7-24

266x15, Memory @ 1419MHz 7-7-7-21

OCZ 100GB Vertex LE100

SAPPHIRE 4870x2, 4870 Trifire

OCZ Z Series 850W

 

 

 

main1_l.jpg

 

main2_l.jpg

 

dram1_l.jpg

 

dram2_l.jpg

 

advanced_l.jpg

 

north_l.jpg

 

 

[b][color="Red"]Configure System Performance Settings[/color][/b]

[b]----------------------------------------------------------[/b]

[i]Target CPU Frequency:. 3990MHz[/i]
[i]Target DRAM Frequency: 1419MHz[/i]

[i]CPU Level Up......................[Auto][/i]
OC Tuner Utility
AI Overclock Tuner ..................[Manual]
CPU Ratio............................[15.0]
CPB Control..........................[Disabled]
CPU Bus Frequency....................[266]
PCIE Frequency.......................[100]
DRAM Frequency.......................[1419MHz]
CPU/NB Frequency.....................[2660]
HT Link Speed........................[2128]
> DRAM Timing Configuration
> DRAM Driving Configuration
[b]************* Please key in numbers directly! *************[/b]
CPU & NB Voltage Mode................[Offset]
 CPU/NB Offset Sign.................[+]
 CPU Offset Voltage.................[i]1.440[/i] [0.196875]
 CPU/NB Offset Sign.................[+]
 CPU/NB Offset Voltage..............[i]1.275[/i] [0.125000]
CPU VDDA Voltage.....................[i]2.475[/i] [Auto]
DRAM Voltage.........................[i]1.637[/i] [1.65000]
HT Voltage...........................[i]1.246[/i] [1.25000]
NB Voltage...........................[i]1.196[/i] [1.20000]
NB 1.8V Voltage......................[i]1.800[/i] [Auto]
SB Voltage...........................[i]1.100[/i] [Auto]
[b]**********************************************************[/b]
CPU Load-Line Calibration............[Auto]
CPU/NB Load-Line Calibration.........[Auto]
CPU Spread Spectrum..................[Disabled]
PCIE Spread Spectrum.................[Disabled]


[color="Red"]DRAM Timing Configuration[/color]

DRAM CAS# Latency....................7 [7 CLK]
DRAM RAS# to CAS# Delay..............7 [7 CLK]
DRAM RAS# PRE Time...................7 [7 CLK]
DRAM RAS# ACT Time..................21 [21 CLK]
DRAM READ to PRE Time................4 [Auto]
DRAM Row Cycle Time.................28 [28 CLK]
DRAM WRITE Recovery Time.............8 [Auto]
DRAM RAS# to RAS# Delay..............4 [Auto]

DRAM READ To WRITE Delay.............7 [Auto]
DRAM WRITE To READ Delay(DD).........2 [Auto]
DRAM WRITE To READ Delay(SD).........4 [Auto]
DRAM WRITE To WRITE Timing...........4 [Auto]
DRAM READ To READ Timing.............4 [Auto]
DRAM REF Cycle Time................110 [Auto]
DRAM Refresh Rate..................7.8 [Auto]
DRAM Command Rate...................1T [1T]


[color="Red"]DRAM Driving Configuration[/color]

[i]DCTO Information:[/i]
CKE drive strength..................2X [Auto]
CS/ODT drive strength.............1.5X [Auto]
ADDR/CMD drive strength.............2X [Auto]
MEMCLK drive strength.............1.5X [Auto]
Data drive strength..............1.25X [Auto]
DQS drive strength...............1.25X [Auto]
Processor ODT...................60ohms [Auto]
[i]DCTO Information:[/i]
CKE drive strength..................2X [Auto]
CS/ODT drive strength.............1.5X [Auto]
ADDR/CMD drive strength.............2X [Auto]
MEMCLK drive strength.............1.5X [Auto]
Data drive strength..............1.25X [Auto]
DQS drive strength...............1.25X [Auto]
Processor ODT...................60ohms [Auto]


[b][color="Red"]CPU Configuration[/color][/b]

[i]AGESA Version 3.7.0.0[/i]

----------------------------------------------------------

[i]AMD Phenom(tm) II X6 1037T Processor
Revision: E0
Cache L1: 768KB
Cache L2: 3072KB
Cache L3: 6MB
Speed   : 4003MHz
uCode Patch Level:       0x10000BF[/i]

----------------------------------------------------------

Microcode Updation..................[Enabled]
Secure Virtual Machine Mode.........[Enabled]
Cool'n'Quite........................[Enabled]
C1E Support.........................[Enabled]
ASUS Core Unlocker..................[Disabled]
CPU Core Activation.................[Auto]



[b][color="Red"]DRAM Controller Configuration[/color][/b]

----------------------------------------------------------

Channel Interleaving................[Auto]
MemClk Tristate C3/ATLVID...........[Disabled]
Memory Hole Remapping...............[Enabled]
DCT Unganged Mode...................[Always]
Power Down Enable...................[Disabled]

 

 

4000_lin_l.jpg

 

 

4000_mem_l.jpg

Share this post


Link to post
Share on other sites

X6 1035T @ 266x15, 8GB Memory @ 1419MHz, Post 3 Of 3

 

 

3dx Max 2009 w/V-ray

Time to render: 6min 21sec

 

lounge_night_benchmark_800.jpg

 

 

TMPGEnc XPress

1GB VOB file ripped from DVD movie

 

4000_encode_l.jpg

 

 

 

4000_cin_l.jpg

 

 

 

4000_cin11_l.jpg

 

 

 

4000_everest_l.jpg

Share this post


Link to post
Share on other sites

X6 1035T @ 270x15, 4GB Memory @ 1800MHz, Post 1 Of 2

 

 

Windows 7 64Bit

 

 

ASUS 4A89TD Pro, 0502 BIOS

Phenom II X6 1035T

2x2GB OCZ Reaper(OCZ3RPR1800LV6GK) PC3-11800 1800MHz 8-8-8-24

270x15, Memory @ 1800MHz 8-8-8-24

OCZ 100GB Vertex LE100

SAPPHIRE 4870x2, 4870 Trifire

OCZ Z Series 850W

 

 

1800_lin_l.jpg

 

 

1800_mem_l.jpg

 

 

3dx Max 2009 w/V-ray

Time to render: 6min 17sec

 

lounge_night_benchmark_800.jpg

 

 

TMPGEnc XPress

1GB VOB file ripped from DVD movie

 

1800_encode_l.jpg

 

 

x264 HD BENCHMARK 3.0 RESULTS

 

Please do not compare it with older versions of the benchmark!

Please copy/paste everything below the line to to report your data

 

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 

Results for x264.exe r1342

--------------------------

encoded 1442 frames, 91.43 fps, 3898.70 kb/s

encoded 1442 frames, 91.61 fps, 3898.70 kb/s

encoded 1442 frames, 91.61 fps, 3898.70 kb/s

encoded 1442 frames, 91.34 fps, 3898.70 kb/s

encoded 1442 frames, 38.51 fps, 3966.14 kb/s

encoded 1442 frames, 38.36 fps, 3971.67 kb/s

encoded 1442 frames, 38.55 fps, 3953.55 kb/s

encoded 1442 frames, 38.58 fps, 3970.71 kb/s

 

 

System Details

--------------

Name AMD K10

product System Product Name

Codename

Specification AMD Phenom™ II X6 1035T Processor

Core Stepping

Stock frequency 3100 MHz

Core Speed 4063.2 MHz

FID range 5.0x - 15.5x

 

Northbridge ATI ID5A11 rev. 02

Southbridge ATI SB750 rev. 40

 

CAS# latency (CL) 8.0

RAS# to CAS# delay (tRCD) 8

RAS# Precharge (tRP) 8

Cycle Time (tRAS) 24

Command Rate (CR) 1T

Memory Frequency 902.9 MHz (3:10)

Memory Type DDR3

Memory Size 4094 MBytes

Channels Dual, (Unganged)

 

Windows Version Microsoft Windows 7 (6.1) Ultimate Edition (Build 7600)

 

Number of processors 1

Number of threads 6

Number of threads 6 (max 6)

L2 cache 6 x 512 KBytes, 16-way set associative, 64-byte line size

Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64

Package Socket AM2+ (940)

Package Type 0x1

 

Temperature 0 34

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...