daayymmmnn ur one clean dude! salute!

i always wanna have aclean desk like that, but i always capable of screwing it up te next second.

If you make me a SIG like that i'll be more than happy to tell you my SECRET? LOL....

lol ok post in the sig request forum and for once i think im ready to boot up ole' photoshop

then u can tell ALL of us whats ur secret

Heres my stuff.
http://www.rigshowcase.com/img/144TSSqJ/2637

My painted up NF2 machine

At my desk : (NF4 On the left, painted Orange )

saweet painting the inside. ofcourse here comes the million dollar ????? What kind of paint did u use, and can we get some closeups?

I used car paint for both my computers. If you visit your local paint shop you should ask them for their colour charts if you wanna pick something that little bit different.

Another good tip if you want a real nice colour is look through motorbike paint charts, some great colours among them.

Also to finish of use clear lacquer, gives it the shine

Thats about it

dude, that's awesome. How did you get that glowing effect, did you use UV reactive paint?

Sometimes I wish I was a moderator. Read the rules! That image is way too big.

Who called it? David did.

I think because of the size of my case i'm going to have to settle for 3/8 ID tubing. Anyway I'm trying to find the best-fit kit to buy (probly will go with dangerden), one that will require little to no modifications. Onto the pics:



As you can see I have the top 2 bays occupied by optical drives, which leaves me with room that would normally fit 2 more drives. I could also easily remove the floppy, which i dont even use, making an effective 3 drive-space.



As for the bottom portion, this is where I would possibly want to install the pump. I could remove the 2nd hard drive cage as I'm only using one hard drive. OR I could remove the hd and put it in one of the 5.25 bays up top and take out both hard drive cages, creating lots of room to work with. Don't mind the outtake fan and the metal plate over where the cpu is - those are easily removable.

I could really use some help here... I'm not exactly sure how to install everything so as to have a nice clean setup with as little modification to the case as possible.

QUOTE=Slider]I think because of the size of my case i'm going to have to settle for 3/8 ID tubing.[/QUOTE]

take a look at this.

Product
http://www.frozencpu.com/ex-wat-90.html?id=k9MmJfTB

Review

http://www.extrememhz.com/freezone-p1.shtml

Good find! I'll definitely keep this in mind although my major concern is that I won't be able to cool my gpu. I'd like to be able to cool both the cpu and gpu, and possibly even the chipset. Any other ideas?

My new Tt Tai-Chi tower :drool:







More pic´s @ www.conman.se @ "datorn"

They are nice cases built one about a month ago came with the water cooling kit already installed.

Brought from here

http://www.overclockers.co.uk/acatalog/Thermaltake.html

no just kidding

these are mine













Obviously, I still have to work on the wires on my main rig. I need a new project I really want one of these bad boys

Some more of pics of my rigs:













And another busy day at my desk, the blue machine is a friends (Pic is 760x570 :nod: ) :

Reelfiles who did you window etching? I had mine done by a company called Hyperkore (top left pics in this link):

http://www.hyperkore.com/etching/custom.html

I ordered a pre-etched window from Frozencpu.com

How much was yours? Did you send in your own pic?

The window only was 30. I sent them my door and a jpg. They cut the door (it was double layered so I did not want to mess with it, did the window and installed it for around 140. The bad thing is now everyone says the window detracts from my case.

Nice case, I don't think it does

oooh i just luv painted internals mine is red. of course good job too on the orange internal paint, its so smooth!

the different with my case is i dont paint the edge of the case...umm just see my post and u see what i mean. its the outer edge of the side panels where the panels actually *locks* to the main frame? last time i paint the internals, i painted that as well and the panel actually has a hard time sliding in. its becoz the paint layer is too thick....

Some pics of my watercooled system. Specs below.

http://img.photobucket.com/albums/v327/jcl...puter/Comp1.jpg

http://img.photobucket.com/albums/v327/jcl...puter/Comp2.jpg

http://img.photobucket.com/albums/v327/jcl...puter/Comp3.jpg

http://img.photobucket.com/albums/v327/jcl...puter/Comp4.jpg

NICE

its a thing of beauty.

ill be honest, those orange/pink water tubes look really fugly. Can't you get em in blue instead?

I suppose. I used Redline Waterwetter as an additive and it is red. I'm probably going to swap it out eventually for some fluidXP and UV reactive water additive.

looks really professional.. lol

Yeah I like the orange one too.

Reel here is the lit version since we were talking about it earlier.

Nice, dude.
I say leave it the way it is.

My Black Lian Li 6077 & My Lian Li PC65 backup.
No them Yellow cables are not DFI Cables, :shake:

[img][IMG]http://img119.imageshack.us/img119/8333/0001064medium3qj.jpg[/img][/IMG]

[img][IMG]http://img95.imageshack.us/img95/8738/0001058medium4el.jpg[/img][/IMG]

[img][IMG]http://img95.imageshack.us/img95/8015/0001066medium9rg.jpg[/img][/IMG]

[img][IMG]http://img98.imageshack.us/img98/9718/0001082medium9th.jpg[/img][/IMG]

[img][IMG]http://img62.imageshack.us/img62/9146/0001135medium9wa.jpg[/img][/IMG]

Are you in BTX configuration ?
If yes, does it take long to switch ATX into BTX with all the screws in the Stacker 810 ?

thanks in advance

Not long at all, though there is one physical modification which will need to take place.

There is a small brace bar which will need to be removed for it to accept a ATX motherboard mounted in BTX style.

This bar is located at the rear, bottom of the top PSU bay. I took a pair of tin snips, cut it off, then ground down the edges and rounded them out.

Whole process of doing the mod, switching around the rear panels and mounting the motherboard took roughly 20 minutes.

hello all dfi'ers
on the weekend i got a new case by antec, and a new thermaltake heatsink, upgraded from stock, at idle with this new heatsink i get about 30C- 33C :eek2:
using of course AS5

here are some pictures





oh and i have been reading the Overclocking guides, so i will be tackling that soon, already had the pc at 2.6 ghz but i didnt understand some stuff about the ram stuff, so i am back to stock at 2.01ghz

thanks for the move lol

lol I was just thinking god damn those ide cables are so much nicer than the ones that came with my board! (before reading what you wrote)

here is my contribution to this thread



AMD Opteron 165
2x Leadtek 7800GT Extremein SLI
DFI Lanparty UT SLI-DR Expert
Sunbeamtech Nuuo 550w PSU

CPU Waterblock = Danger Den TDX
GPU waterblock(s) = Danger Den NV-78 SLI
Pump = Danger Den D4 12v DC
Rad = Black Ice Xtreme II (Dual 120mm) w/2x120mm Papst Fans
Res = Danger Den dual 5.25" bay
Tubing = 1/2"ID clearflex
Clamps = red and white plastic clamps (local supplier ran out of white)
Water/Additive = Distilled water and Swiftech HydrX

Very nice work Jason!

Wow, that is one very nice rig!

Read The Rules. That thing will be deleted instantly. 800x600.

Told You.

Obsessive compulsive much?

I like to pretend to be a forum bully.

AKA Moderator

CRt!!!! ewwwwww.

Hey, watch that!!!

I still use an 8 year old Sony Trinitron for image editing. LCD displays are still not up to the image quality level that good CRTs have had for years.

I use DisplayMate tools to adjust my displays and the Sony is still the best especially in the areas of black and shadow.

Running dual-screen CRTs here (2048x768@85Hz) and loving it. I'll get LCDs, when I get enough money.