Ultra-D

Nice job as always Angry!

Almost done with my nf4 build so I thought I'd put a few pics up as well.















got a lil gallery deal thingy goin on here:
http://www.uploadit.org/gallery/13004

SWEET as usual Soundx...

I think I see my girlfreind in the backround of the 4th pic...

it be my 875P-T...one supa machine...

[bimg]http://www.angrygames.com/pics/875p-t/875p-t_3.jpg[/bimg]

Looks good AG..But it seems someone needs to get the wires under control..

Im gona be posting some updated pics of my rig.. I just got a CM Stacker case .. sleeved my psu and other wires.. Also cut a 120mm blowhole..

blarg on the wires...that psu is not good like my Fortron Blue Storm (and i aint gonna do the wire wrapping on it so neener)

im still thinking of a Stacker...

just got my LianLi PC65B case back from my dude the cuts sheet-metal...he did a bang-up job on in...its gonna house either my SLI-DR or an Intel 875B revB

hrmm...my post being last is a sure-fire bet that the thread is gonna die the true death lol


so neener neener i been monkey-ing around this weekend trying to get stuff done, and with a little flair...

i need to take better pics...and i will...beware!


the DFI NF4 SLI-DR in a temp HSPC TechStation:




my red Aspire X-Infinity case that I finally doing something with (875B Lanparty, Danger Den TDX kit...now stupid side panel wont fit on because there's an indent on the panel and its right where the dang radiator sits...gonna have a metal guy bang that out for me one day...








spooky NF3 with the....whatever color/kind of light that is...pitch black room...skeeeeery!

Geez Angry, careful with that Screwdriver stickin up outa dat nifty "Dual Bios" container.

You could poke an eye out when you're banging yer haid on the table.

When is the 939 AGP comin out? hehehe

Well here is my new updated rig. Its rather HUGE. But I like it.

This is the complete tower in all its entirety.



Then we have an inside view of the case with panel off, and looking neatly wired. Took me a while to get them like that but it looks good. Although I still have the molex and floppy connectors on the motherboard itself to plug in, but it should be fine for now.



After that we have another inside view, although at a slightly different angle. This angle makes it look really neatly cabled I think.



Then the final pic is of the top of the case with 3 120mm blowholes ready to mount fans and a Thermochill 120.3 Water radiator, when I watercool the graphics card, when I get a new card anyway.



And there you have it. I think the case looks great with the chromed metallic black effect, and my cabling for once is nice and neat.

Still got some other stuff planned for this rig too, gotta get my monitor back from RMA first this awful 15" is killing my eyes. It'll all come together but more than likely very slowly.

Hey, just got back from a 4 day LanParty (PDXlan 4.05) had a great time there. I took my new DFI NF4 rig with me. Here are pics from the event.

BTW in one of the pics you can see a certificate, that was for the "Fastest Rig at PDXlan 4.05" rig specs in sig. My compitition was a couple of FX-55 rigs (one was on vapo) and a handfull of Intel 775 rigs). I won very ez. by a big margin....

rules my friend...read da rules

(gj Rokk btw)

btw, where can I get one of those cases?

excellent work CPU Killer. very very nice indeed.

Got links to more pics?

beautiful job on the rig dillingerdan. Always impresssed with those that take the extra step with cable management.

Job welll done dudes. Props to ya both.

and the rest of the rig's

http://users.pandora.be/matenhen/afbroom

Whoops sorry Angry! Totally forgot about the rules, just pasted the same post I put up somewhere else. Edited it now though.



HERE!

drat a prometia...dont really want one of those (tho i might take RGone's since he aint never gonna use it)

was asking more about that wooden case that CPU Killer has too...me like the wood! (uh...that really sounds dirty...i think i'll retract that statement and return instead with ME LUV POWA!)

umm... yea... you ain't ever getting my wood... FREAK!!! :eek:

But you can buy one of my cases in a month or so..... these are the prototypes to work out the bugs.

My New A64! :nod:

Here's my case. Nothing too fancy yet since I've been concentrating on performance so far. I at least tried to make it look nice though.

There's a closed case pic, open case pic and night shot. It really looks a lot brighter with the lights off than my camera will show, but this is the best I could do.

Oh, and no, the pictures are not mirrored. This is one of those crazy upside-down and backwards cases. I like it though

Just for envy's sake, the last picture shows the monitor I've been using with it.

You could always have me build you a tyrue uber wood case.. :shake:


Only a few hundred hours of work into this one.

At this rate, I need a patent.. everyone's making one.. lol :nod:

are all those yellow slots really that bright ? is that a black light you are using? talking to you dippys btw

yea they are... I'm using a big 24" black light I got from my uncle... Im gonna add a pic using my 2 UV CCFL's soon.. hopefully they stay just as bright!


They are actually brighter, in person, cuz the camera cannot begin to harness the awesomeness of the GLOWIE THINGYS! :nod:

sorry so small lol

/me goes blind from bryan's pic

Clear case...

2nd DFI....

nice work chris

how rugged are those clear cases? always afraid I'd break sumthin.

You're the second to ask..... I've had it for a year with no problems.

hehe, no case here...just the tray.

awesome lol

.. and is that a KT400... wow oldschool!

Hope u like!!

A few more.

Very nicely done Musikfreakah - great having the pics all labeled with highlights and information. You should be able to port all that MBM5 info to the L.I.S.

How is that Mem ducting mod fastened?

Looks awesome dude. Big thumbs up!

Yes I have them ported but too many data and the LIS cant handle all the MBM settings well atleast still trying too :-D I like your LCD on the side panel and if there is away to activate Screen Saver on it while still using primary display :-D

Mem ducting MOD isnt fastened yet, It sits on top of my CPU HSF since its very lite. BUt im still trying to find a way to fasten it to the rear fan screw :-D

Thanks! :-D

bump !!

Come on people.. show the rigs..!!

Hehe
I got some big plans for my new case. Got an Antec TX1088AMG on order, then going to pick up a dremel for a little modding

In the meantime, here's my old rig:
Frankenbox


Was in a crazy mood when i did all that.
Used a power drill & pair of tin-snips for all the cutting :shake:

dang psy^ that's really impressive!

I love the shape of the windows on the side. All looks really well done.
The holes on the top back a lot of sense. really nice work for a drill and tin snips.

I noticed you have the "Frankenwires" on the outside as well.

hey ag where did u get your coolermaster uv tubes from? they seem to put out a TON of light and i can't seem to find them on pricewatch you guys got some hot cases, back to work on mine.... time to rid myself of the rats nests. also anyone know where to get those UV psu 4 and 22pin connectors that go to the MOBO and the fdd power connector also in uv? i've only been able to find 1 place with the ide ones only. BALLS!

Muzikfreakah
what are those cool looking led bars above your cpu hsf?

Yeah a little messy but it currently runs damn cool.

From MBM5

Temperature: (Case: 37°C/99°F, CPU Socket: 40°C/104°F, CPU Diode: 25°C/77°F, Fan 1: 2556RPM)

And that's only a few minutes after playing BF42.

Try www.svc.com

here is my current setup, might go for WC in the near future

Ryn,

That's a nice rig and cave you got there. I like the way you mounted the controller for easy access. Sweet!

thanks ExRoadie

shiny shiny

mmmm powerstream, that's a very mirror'd finish, can't wait till mine gets here this week sometime... maybe today! WooT :Thumb:

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0007.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0008.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0009.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0010.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0011.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0012.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0013.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0014.jpg[/BIMG]

[BIMG]http://i11.photobucket.com/albums/a161/malinois1/DSCN0015.jpg[/BIMG]

Nice malinois1.. I always like a nice neat case..