so i got my mushkin 580watt psu today and i plug it in but nothing happens. the only thing that comes on is the railfusion light and the MB light for the ram. i checked all the cords 12v's, video card, etc even the powerswitch connector, so i put back in my exmerax and it works fine no problem.

am i missing somthing? its getting power, as i can see with the rainfusion light and the MB is getting power as i can see the light go turn when i press the power but nothing else happens...

its so odd

maybe i should disconnect the grounding to the MB?


it looks like a dead psu i guess b/c i dissonnected everything expect the 24/20pin and the 12v and still no go.

any ideas. is there somthing muskin does to make there psu work like must be on for an hour before powerup?



i fixed the oddest problem ever. if you dont do all the modules in order it wont boot. i just dont understand. b/c i tested it without anything but the 20 and the 12v plugged in and it wouldnt boot. i plug everthing back in but top down and it works.

It sounds like a dead PSU to me. If you have a PSU tester you could verify for sure or not, but most likely the problem is the PSU is dead.

its working. it was really odd everything has to be in order and pushed in hard. noob mistake i guess

I'm sure you will be happy. I am.

this thing rocks, never had anything more soild